2K Etch Primer

Axalta Coating Systems, LLC

Revision date : 2016-07-14

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.
GHS02 GHS08 GHS05 GHS07
Health risk rating 5
Safety risk rating 3
Environmental risk rating 1

Note: Ingredients listed on restricted chemical lists

EC/CAS

64-17-5

Name of the chemical

Ethanol

Concentration

15-26%

EC/CAS

108-10-1

Name of the chemical

4-methylpentan-2-one; isobutyl methyl ketone (MIBK)

Concentration

13.0%

EC/CAS

71-36-3

Name of the chemical

1-butanol

Concentration

9%

EC/CAS

13530-65-9

Name of the chemical

Zinc chromate

Concentration

9.0%

Listed in

EC/CAS

13463-67-7

Name of the chemical

Reaction mass of titanium dioxide and silver chloride

Concentration

3.7%

General Information

Revision date

2016-07-14

Product name

2K Etch Primer

1.2.1 Relevant identified uses

Coating for professional use Axalta Coating Systems, LLC Applied Corporate Center 50 Applied Bank Boulevard, Suite 300 US Glen Mills, PA 19342

Emergency telephone

(800) 424-9300

Icons in SDS

GHS02 GHS05 GHS07 GHS08 M004 M009 M010 M011 M017

Company Information

company name

Axalta Coating Systems, LLC

GHS Information

Signal word

Danger

Hazard Codes

Hazard statements (CLP)

H225, H317, H318, H335, H336, H350

Hazard statements

Code

Statements

H225

Highly Flammable liquid and vapour

Section 2

Signal word

Danger

Hazard statements

Highly flammable liquid and vapour. May cause an allergic skin reaction. Causes serious eye damage. May cause respiratory irritation. May cause drowsiness or dizziness. May cause cancer.

Precautionary statements

Obtain special instructions before use. Keep away from heat/sparks/open flames/hot surfaces. No smoking. Ground/bond container and receiving equipment. Use explosion-proof electrical/ventilating/lighting equipment. Use only non-sparking tools. Take precautionary measures against static discharge. Avoid breathing dust/ vapours/ spray. Use only outdoors or in a well-ventilated area. Contaminated work clothing should not be allowed out of the workplace. Wear protective gloves/protective clothing/eye protection/face protection. c 2016 Axalta Coating Systems, LLC and all affiliates. All rights reserved. ⃝ en/US IF ON SKIN: Wash with plenty of soap and water. IF ON SKIN (or hair): Remove/ Take off immediately all contaminated clothing. Rinse skin with water/ shower. IF INHALED: Remove person to fresh air and keep comfortable for breathing. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER/doctor. Specific treatment (see supplemental first aid instructions on this label). If skin irritation or rash occurs: Get medical advice/ attention. Wash contaminated clothing before reuse. Store in a well-ventilated place. Keep container tightly closed. Store locked up. Dispose of contents/container in accordance with local regulations.

Other hazards which do not result in classification

Intentional misuse by deliberately concentrating and inhaling the contents may be harmful or fatal.

Ingredient(s) with unknown acute toxicity

0 %

2.1 Classification of the substance or mixture

Flammable liquids Category 2 Serious eye damage/eye irritation Category 1 Skin sensitisation Category 1 Carcinogenicity Category 1A Target Organ Systemic Toxicant - Single exposure Category 3 Endpoints which are “not classified”, “cannot classified” and “not applicable” are not shown.

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.