Note: Ingredients listed on restricted chemical lists
EC/CAS
123-86-4
Name of the chemical
acetic acid, butyl ester
Concentration
30-40%
EC/CAS
64742-95-6
Name of the chemical
Solvent naphtha (petroleum), light arom
Concentration
1-3%
EC/CAS
77-58-7
Name of the chemical
Dibutylzinndilaurat; Dibutyl[bis(dodecanoyloxy)]stannan (2017/776)
Concentration
0.1-0.3%
EC/CAS
868-77-9
Name of the chemical
2-hydroxyethyl methacrylate
Concentration
0.1-0.3%
General Information
Revision date
2019-05-01
Product name
PERMASOLID HS RACE CLEARCOAT 8700
supplier name
Axalta Coating Systems Australia Pty Limited
Emergency telephone
131 126
Icons in SDS
Company Information
company name
Axalta Coating Systems Australia Pty Limited
GHS Information
Signal word
Danger
Section 2
Signal word
Danger
Hazard statements
Flammable liquid and vapour. May cause an allergic skin reaction. May cause drowsiness or dizziness. May damage fertility or the unborn child. Repeated exposure may cause skin dryness or cracking. Contains epoxy constituents. May produce an allergic reaction.
Precautionary statements
Obtain special instructions before use. Keep away from heat/sparks/open flames/hot surfaces. No smoking. Ground/bond container and receiving equipment. Use explosion-proof electrical/ventilating/lighting equipment. Use only non-sparking tools. Take precautionary measures against static discharge. Avoid breathing dust/ vapours/ spray. Use only outdoors or in a well-ventilated area. Contaminated work clothing should not be allowed out of the workplace. Wear protective gloves/protective clothing/eye protection/face protection. IF ON SKIN: Wash with plenty of soap and water. IF ON SKIN (or hair): Remove/ Take off immediately all contaminated clothing. Rinse skin with water/ shower. IF INHALED: Remove person to fresh air and keep comfortable for breathing. Specific treatment (see supplemental first aid instructions on this label). If skin irritation or rash occurs: Get medical advice/ attention. Wash contaminated clothing before reuse. Store in a well-ventilated place. Keep container tightly closed. Store locked up. Dispose of contents/container in accordance with local regulations.
Other hazards which do not result in classification
Contains epoxy constituents. See information supplied by the manufacturer. Contains: bis(1,2,2,6,6-pentamethyl-4-piperidyl) sebacate; A mixture of: α-3-(3-(2H-benzotriazol-2-yl)-5-tert-butyl-4-hydroxyphenyl)propionyl-ω-hydroxypoly(oxyethylene); α-3-(3-(2H-benzotriazol-2-yl)-5-tert-butyl-4-hydroxyphenyl)propionyl-ω-3-(3-(2H-benzotriazol-2-yl)-5-tert-butyl-4- hydroxyphenyl)propionyloxypoly(oxyethylene); methyl 1,2,2,6,6-pentamethyl-4-piperidyl sebacate; dibutylbis((1-oxododecyl)oxy)stannane; 2-hydroxyethyl methacrylate; 2,3-epoxypropyl neodecanoate. May produce an allergic reaction. Special hazard instructions for humans and environment Do not breathe vapour/spray. In case of insufficient ventilation, wear suitable respiratory equipment. Restricted to professional users.
