Note: Ingredients listed on restricted chemical lists
EC/CAS
123-86-4
Name of the chemical
acetic acid, butyl ester
Concentration
10-20%
EC/CAS
80-62-6
Name of the chemical
methacrylic acid, methyl ester
Concentration
0.3-1.0%
EC/CAS
109-99-9
Name of the chemical
Tetrahydrofuran (618/2012)
Concentration
0.3-1.0%
EC/CAS
818-61-1
Name of the chemical
acrylic acid, monoester with ethyleneglycol
Concentration
0.1-0.3%
EC/CAS
108-88-3
Name of the chemical
Toluene
Concentration
0.1-0.3%
General Information
Revision date
2017-08-15
Product name
PERMASOLID CLEARCOAT COLOUR ADDITIVE 9041
1.2.1 Relevant identified uses
Coating for professional use
1.2.2. Uses advised against
The product is only for industrial and/or professional use, not for any private consumer use Information on the Manufacturer/Supplier/Distributor
supplier name
Axalta Coating Systems Australia Pty Limited
Icons in SDS
Company Information
company name
Axalta Coating Systems Australia Pty Limited
GHS Information
Signal word
Hazard statements
Section 2
Signal word
Hazard statements Flammable liquid and vapour Causes skin irritation May cause an allergic skin reaction Causes serious eye irritation May cause respiratory irritation Suspected of causing cancer Suspected of damaging fertility or the unborn child May cause damage to organs through prolonged or repeated exposure Precautionary statements Obtain special instructions before use Keep away from heat/sparks/open flames/hot surfaces. No smoking Ground/bond container and receiving equipment Use explosion-proof electrical/ventilating/lighting equipment Use only non-sparking tools Take precautionary measures against static discharge Do not breathe dust/ fume/ gas/ mist/ vapours/ spray Use only outdoors or in a well-ventilated area Contaminated work clothing should not be allowed out of the workplace Wear protective gloves/protective clothing/eye protection/face protection IF ON SKIN: Wash with plenty of soap and water IF ON SKIN (or hair): Remove/ Take off immediately all contaminated clothing. Rinse skin with water/ shower IF INHALED: Remove person to fresh air and keep comfortable for breathing IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing Specific treatment (see supplemental first aid instructions on this label) If skin irritation or rash occurs: Get medical advice/ attention If eye irritation persists: Get medical advice/ attention Take off contaminated clothing and wash before reuse Store in a well-ventilated place. Keep container tightly closed Store locked up Dispose of contents/container in accordance with local regulations
Contains
methyl methacrylate; 2-hydroxyethyl acrylate. May produce an allergic reaction Special hazard instructions for humans and environment Do not breathe vapour/spray. Wear suitable protective clothing and gloves. In case of insufficient ventilation, wear suitable respiratory equipment. Restricted to professional users.
2.1 Classification of the substance or mixture
Flammable liquids Category 3 Skin corrosion/irritation Category 2 Serious eye damage/eye irritation Category 2A Skin sensitisation Category 1 Carcinogenicity Category 2 Toxicity for reproduction Category 2 Target Organ Systemic Toxicant - Single exposure Category 3 Target Organ Systemic Toxicant - Repeated exposure
