Imron R Fleet Line

Axalta Coating Systems Australia Pty Limited

Revision date : 2018-09-07

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.
GHS02 GHS07 GHS08
Health risk rating 5
Safety risk rating 2
Environmental risk rating 5

Note: Ingredients listed on restricted chemical lists

EC/CAS

25068-38-6

Name of the chemical

4,4'-Isopropylidenediphenol, oligomeric reaction products with 1-chloro-2,3-epoxypropane

Concentration

10-20% 700<=1200

Listed in

EC/CAS

14807-96-6

Name of the chemical

Talc

Concentration

10-20%

EC/CAS

1330-20-7

Name of the chemical

Xylene

Concentration

5-10%

Listed in

EC/CAS

7779-90-0

Name of the chemical

Trizinc bis(orthophosphate)

Concentration

3-5%

Listed in

EC/CAS

100-41-4

Name of the chemical

Ethylbenzene

Concentration

1-3%

Listed in

EC/CAS

111-76-2

Name of the chemical

Ethylene glycol monobutyl ether (EGBE)

Concentration

1-3%

EC/CAS

546-93-0

Name of the chemical

Magnesium-carbonate

Concentration

1-3%

Listed in

EC/CAS

71-36-3

Name of the chemical

1-butanol

Concentration

1-3%

General Information

Revision date

2018-09-07

Product name

Imron R Fleet Line

supplier name

Axalta Coating Systems Australia Pty Limited

Icons in SDS

GHS02 GHS07 GHS08

Company Information

company name

Axalta Coating Systems Australia Pty Limited

Section 2

Hazard statements

Flammable liquid and vapour. Causes skin irritation. May cause an allergic skin reaction. Causes serious eye irritation. Suspected of damaging fertility or the unborn child. May cause damage to organs through prolonged or repeated exposure. Contains epoxy constituents. May produce an allergic reaction.

Precautionary statements

Obtain special instructions before use. Keep away from heat/sparks/open flames/hot surfaces. No smoking. Keep container tightly closed. Ground/bond container and receiving equipment. Use explosion-proof electrical/ventilating/lighting equipment. Use only non-sparking tools. Take precautionary measures against static discharge. Do not breathe dust/ fume/ gas/ mist/ vapours/ spray. Contaminated work clothing should not be allowed out of the workplace. Wear protective gloves/protective clothing/eye protection/face protection. IF ON SKIN: Wash with plenty of soap and water. IF ON SKIN (or hair): Remove/ Take off immediately all contaminated clothing. Rinse skin with water/ shower. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. IF exposed or concerned: Get medical advice/ attention. Specific treatment (see supplemental first aid instructions on this label). If skin irritation or rash occurs: Get medical advice/ attention. If eye irritation persists: Get medical advice/ attention. Take off contaminated clothing and wash before reuse. Store in a well-ventilated place. Keep cool. Store locked up. Dispose of contents/container in accordance with local regulations.

Other hazards which do not result in classification

Contains epoxy constituents. See information supplied by the manufacturer. Special hazard instructions for humans and environment Do not breathe vapour/spray. Wear suitable protective clothing and gloves. In case of insufficient ventilation, wear suitable respiratory equipment. Avoid release to the environment. Refer to special instructions/ Safety data sheets. Restricted to professional users.

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.