613-22 Nason Industrial 2K PU High Edge White

Axalta Coating Systems Australia Pty Limited

Revision date : 2016-06-21

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.
GHS02 GHS05 GHS07
Health risk rating 5
Safety risk rating 5
Environmental risk rating 5

Note: Ingredients listed on restricted chemical lists

EC/CAS

13463-67-7

Name of the chemical

Reaction mass of titanium dioxide and silver chloride

Concentration

30-40%

EC/CAS

1330-20-7

Name of the chemical

Xylene

Concentration

10-20%

Listed in

EC/CAS

123-86-4

Name of the chemical

acetic acid, butyl ester

Concentration

5-10%

EC/CAS

100-41-4

Name of the chemical

Ethylbenzene

Concentration

3-5%

Listed in

EC/CAS

7631-86-9

Name of the chemical

Silver adsorbed on silicon dioxide

Concentration

1-3%

General Information

Revision date

2016-06-21

Product name

613-22 Nason Industrial 2K PU High Edge White

supplier name

Axalta Coating Systems Australia Pty Limited

Emergency telephone

131 126

Icons in SDS

GHS02 GHS07 GHS08

Company Information

company name

Axalta Coating Systems Australia Pty Limited

GHS Information

Signal word

Danger

Section 2

Signal word

Danger

Hazard statements

Contains epoxy constituents. May produce an allergic reaction. Highly flammable liquid and vapour. Causes skin irritation. May cause an allergic skin reaction. Causes serious eye irritation. May cause damage to organs through prolonged or repeated exposure.

Precautionary statements

Keep away from heat/sparks/open flames/hot surfaces. No smoking. Keep container tightly closed. Ground/bond container and receiving equipment. Use explosion-proof electrical/ventilating/lighting equipment. Use only non-sparking tools. Take precautionary measures against static discharge. Do not breathe dust/ fume/ gas/ mist/ vapours/ spray. Contaminated work clothing should not be allowed out of the workplace. Wear protective gloves/protective clothing/eye protection/face protection. IF ON SKIN: Wash with plenty of soap and water. IF ON SKIN (or hair): Remove/ Take off immediately all contaminated clothing. Rinse skin with water/ shower. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Get medical advice/ attention if you feel unwell. Specific treatment (see supplemental first aid instructions on this label). If skin irritation or rash occurs: Get medical advice/ attention. If eye irritation persists: Get medical advice/ attention. Take off contaminated clothing and wash before reuse. Store in a well-ventilated place. Keep cool. Dispose of contents/container in accordance with local regulations.

Contains

bis(1,2,2,6,6-pentamethyl-4-piperidyl) sebacate; methyl 1,2,2,6,6-pentamethyl-4-piperidyl sebacate. May produce an allergic reaction. Special hazard instructions for humans and environment Keep away from sources of ignition - No smoking. Do not breathe vapour/spray. Take precautionary measures against static discharges. Wear suitable protective clothing and gloves. In case of insufficient ventilation, wear suitable respiratory equipment. Restricted to professional users.

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.