483-87 Selectprime 2K Urethane Primer Act

Axalta Coating Systems Australia Pty Limited

Revision date : 2015-01-29

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.
GHS02 GHS08
Health risk rating 5
Safety risk rating 3
Environmental risk rating 1

Note: Ingredients listed on restricted chemical lists

EC/CAS

141-78-6

Name of the chemical

acetic acid, ethyl ester

Concentration

20-30%

EC/CAS

1330-20-7

Name of the chemical

Xylene

Concentration

20-30%

Listed in

EC/CAS

100-41-4

Name of the chemical

Ethylbenzene

Concentration

5-10%

Listed in

EC/CAS

123-86-4

Name of the chemical

acetic acid, butyl ester

Concentration

1-3%

General Information

Revision date

2015-01-29

Product name

483-87 Selectprime 2K Urethane Primer Act

1.2.1 Relevant identified uses

of the substance/preparation Hardener for professional use

supplier name

Axalta Coating Systems Australia Pty Limited

Emergency telephone

+(64) 9801 0034, +(64) 3 479 7248, +64 (09) 259 2738

Icons in SDS

GHS02 GHS08

Company Information

company name

Axalta Coating Systems Australia Pty Limited

GHS Information

Signal word

Danger

Hazard Codes

Hazard statements (CLP)

H225, H315, H317, H319, H333, H334, H361, H373, H402

Hazard statements

Code

Statements

H225

Highly Flammable liquid and vapour

Section 2

Signal word

Danger

Hazard statements

Highly flammable liquid and vapour. May be harmful if inhaled. Causes skin irritation. Causes serious eye irritation. May cause allergy or asthma symptoms or breathing difficulties if inhaled. May cause an allergic skin reaction. Suspected of damaging fertility or the unborn child. May cause damage to organs through prolonged or repeated exposure. Harmful to aquatic life.

Precautionary statements

Avoid release to the environment. Do not breathe dust/ fume/ gas/ mist/ vapours/ spray. In case of inadequate ventilation wear respiratory protection. Keep away from heat/sparks/open flames/hot surfaces. - No smoking. Keep container tightly closed. Obtain special instructions before use. Wear protective gloves/protective clothing/eye protection/face protection. If experiencing respiratory symptoms: Call a POISON CENTER or doctor/ physician. IF exposed or concerned: Get medical advice/ attention. If eye irritation persists: Get medical advice/ attention. IF INHALED: If breathing is difficult, remove victim to fresh air and keep at rest in a position comfortable for breathing. If skin irritation or rash occurs: Get medical advice/ attention. Wash contaminated clothing before reuse. Store in a well-ventilated place. Keep cool.

Other hazards which do not result in classification

Contains isocyanates. See information supplied by the manufacturer. Contains: 4-isocyanatosulphonyltoluene. May produce an allergic reaction.

2.1 Classification of the substance or mixture

Flammable liquids Category 3.1B Acute inhalation toxicity Category 6.1E Skin corrosion/irritation Category 6.3A Serious eye damage/eye irritation Category 6.4A Respiratory sensitisation Category 6.5A Skin sensitisation Category 6.5B Toxicity for reproduction Category 6.8B Target Organ Systemic Toxicant - Repeated exposure Category 6.9B Acute aquatic toxicity Category 9.1C Endpoints which are “”not classified“”, “”cannot classified“” and “”not applicable“” are not shown

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.