Aussie Shield 300-PLF (Permeable Liquid Flashing)

Hazard statements (CLP)

H317, H360

Code

Statements

H317

May cause an allergic skin reaction

SECTION 2: Hazards identification

GHS Classification Physical Health Not Hazardous Skin Sensitizer Category 1 Reproductive Toxicity Category 1B

2.2 Label elements

Danger! H317 May cause an allergic skin reaction. H360 May damage fertility or the unborn child. P201 Obtain special instructions before use. P202 Do not handle until all safety precautions have been read and understood. P261 Avoid breathing dust or vapors. P272 Contaminated work clothing must not be allowed out of the workplace. P280 Wear protective gloves, protective clothing, and eye protection. P308 + P313 IF exposed or concerned: Get medical attention. P302 + P352 IF ON SKIN: Wash with plenty of water. P333 + P313 If skin irritation or rash occurs: Get medical attention. P362 + P364 Take off contaminated clothing and wash it before reuse. P405 Store locked up. P501 Dispose of contents and container in accordance with local and national regulations. Hazards not otherwise specified: None.

2.1 Classification of the substance or mixture

Physical: Health: Not Hazardous Skin Sensitizer Category 1 Reproductive Toxicity Category 1B GHS Label Elements: Danger! H317 May cause an allergic skin reaction. H360 May damage fertility or the unborn child. P201 Obtain special instructions before use. P202 Do not handle until all safety precautions have been read and understood. P261 Avoid breathing dust or vapors. P272 Contaminated work clothing must not be allowed out of the workplace. P280 Wear protective gloves, protective clothing, and eye protection. P308 + P313 IF exposed or concerned: Get medical attention. P302 + P352 IF ON SKIN: Wash with plenty of water. P333 + P313 If skin irritation or rash occurs: Get medical attention. P362 + P364 Take off contaminated clothing and wash it before reuse. P405 Store locked up. P501 Dispose of contents and container in accordance with local and national regulations. Hazards not otherwise specified: None. 3. Composition/Information on Ingredients Component CAS No. Amount Limestone 1317-65-3 30-60% Calcium Carbonate 471-34-1 1-5% Titanium Dioxide* 13463-67-7 1-5% N-[3-(Trimethoxysilyl)propyl]-1,2-ethanediamine 1760-24-3 0.1-<1% Dibutyltin bis(acetylacetonate) 22673-19-4 0.1-<1% Crystalline Silica* 14808-60-7 0.1-<1% *The Crystalline Silica, and Titanium Dioxide in this product are inextricably bound in the polymer matrix in a manner that no exposure occurs during normal use and handling. Therefore, this product is not classified as a carcinogen. The specific identity and/or exact percentage (concentration) of composition has been withheld as a trade secret. 4. First Aid Measures Inhalation: Remove victim to fresh air. If breathing is difficult or irritation persists, get medical attention. Skin Contact: Remove contaminated clothing. Wash the contact area thoroughly with soap and water for several minutes. Get medical attention if irritation or rash occurs. Launder clothing before re-use. Eye Contact: Flush eyes thoroughly with large quantities of water for several minutes, while holding the eye lids open to be sure the material is washed out. Remove contact lenses if present and easy to do and continue rinsing. Get medical attention if irritation occurs and persists. Ingestion: Wash mouth with water. Do not induce vomiting. Seek medical attention if you feel unwell. Most Important Symptoms: Direct contact with eyes may cause eye irritation. May cause skin sensitization. Inhalation of dust from dried paste may cause irritation to mucous membranes and respiratory tract. This product contains Dibutyltin bis(acetylacetonate) which may cause reproductive harm. Indication of Immediate Medical Attention/Special Treatment: Immediate medical attention is generally not required. 5. Firefighting Measures Suitable (and Unsuitable) Extinguishing Media: Use any extinguishing media that is appropriate for the surrounding fire. Specific Hazards Arising from the Chemical: Product is not flammable, combustible, or explosive. Special Fire Fighting Procedures: Use measures appropriate for the fire situation. Cool fire exposed containers with water. 6: Accidental Release Measures Personal Precautions, Protective Equipment, and Emergency Procedures: Wear appropriate protective clothing and respiratory protection (see Section 8). Avoid breathing dust from dried product. Methods and Materials for Containment and Clean-Up: Cover with an inert absorbent material and collect into an appropriate container for disposal. Environmental Precautions: Report spills and releases as required to appropriate authorities. 7. Handling and Storage Precautions for Safe Handling: Use with adequate ventilation. Avoid inhalation of dust or vapor. Small amounts of methanol (CAS 67-56-1) are formed by hydrolysis and released upon curing. Avoid unnecessary contact with the product. Use appropriate protective clothing and equipment. Wash thoroughly after handling. Remove contaminated clothing and launder before re-use. Do not eat, drink, or smoke in the work area. Keep containers closed when not in use. Empty containers may contain product residue and may be hazardous. Follow all SDS precautions in handling empty containers. Conditions for Safe Storage, Including any Incompatibilities: Store locked up. Store in cool, dry area. Keep containers closed. Store away from strong acids, bases, oxidizers, and moisture. 8. Exposure Controls / Personal Protection Exposure Guidelines: CHEMICAL EXPOSURE LIMIT Limestone (Calcium carbonate) 15 mg/m3 TWA OSHA PEL (Total dust) 5 mg/m3 TWA OSHA PEL (Respirable fraction) Calcium Carbonate 15 mg/m3 TWA OSHA PEL (Total dust) 5 mg/m3 TWA OSHA PEL (Respirable fraction) Titanium Dioxide* 0.2 mg/m3 TWA ACGIH TLV (Respirable) nanoscale 2.5 mg/m3 TWA ACGIH TLV (Respirable) finescale 15 mg/m3 TWA (Total dust) OSHA PEL N-[3-(Trimethoxysilyl)propyl]-1,2- None Established ethanediamine Dibutyltin bis(acetylacetonate) (as Tin, 0.1 mg/m3 TWA, 0.2 mg/m3 STEL ACGIH TLV (skin) organic compounds, as Sn) 0.1 mg/m3 TWA OSHA PEL Crystalline Silica* 0.025 mg/m3 TWA, ACGIH TLV 0.05 mg/m3 TWA OSHA PEL *The Crystalline Silica, and Titanium Dioxide in this product are inextricably bound in the polymer matrix in a manner that no exposure occurs during normal use and handling. Therefore, this product is not classified as a carcinogen Appropriate Engineering Controls: Use adequate general or local exhaust ventilation to maintain exposures below applicable occupational exposure limits. Personal Protective Equipment Respiratory Protection: In operations where the occupational exposure limits are exceeded or exposure levels are excessive, an approved respirator with applicable cartridges or supplied air respirator should be used. Respirator selection and use should be based on contaminant type, form, and concentration. Follow applicable regulations and good Industrial Hygiene practice. Gloves: Wear impervious gloves to avoid skin contact. Eye Protection: Safety goggles or safety glasses with side shields are recommended. Other Protective Equipment/Clothing: Wear protective clothing as needed to avoid skin contact and contamination of personal clothing. 9. Physical and Chemical Properties Appearance and Odor: Colored Paste. Odorless. Physical State: Solid Odor Threshold: Not applicable pH: Not applicable Specific Gravity: Not determined Initial Boiling Point/Range: Not applicable Vapor Pressure: Not determined Melting/Freezing Point: Not applicable Vapor Density: Not applicable Solubility In Water: Not determined Percent Volatile: <3% Viscosity: Not applicable Evaporation Rate: Not determined Relative Density: 1.6 – 1.7 VOC Content: <20 g/L / 2% Coefficient Of Water/Oil Distribution: Not determined Autoignition Temp: Not determined Flash Point: 140 °C / 284 °F Flammability (solid, gas): Not applicable Flammability Limits: Not applicable Decomposition Temperature: Not applicable Particle Characteristics: Not determined 10. Stability and Reactivity Reactivity: Product cures with moisture. Chemical Stability: Stable under normal storage and handling conditions. Possibility of Hazardous Reactions: Hazardous reactions will not occur under normal conditions of storage and use. Conditions to Avoid: Open flames. Unintentional exposure to moisture. Incompatible Materials: Strong oxidizers, strong acids, and bases. Moisture. Hazardous Decomposition Products: Small amounts of methanol (CAS 67-56-1) are formed by hydrolysis and are released upon curing. 11. Toxicological Information Potential Health Effects: Acute Hazards: Inhalation: Inhalation of dust from dried paste may cause mucous membrane and respiratory irritation. Skin Contact: Direct contact may cause an allergic skin reaction (sensitization). Eye Contact: Direct contact with eyes may cause irritation. Ingestion: May cause irritation and discomfort to the digestive tract. Chronic Effects: None known. Carcinogenicity: Not classified. Titanium Dioxide is listed as Possibly Carcinogenic to Humans (Group 2B) by IARC. Crystalline Silica is listed as Carcinogenic to Humans (Group 1) by IARC, Known to Be a Human Carcinogen by NTP, and as a Carcinogen by OSHA. Titanium dioxide, and Crystalline Silica only presents a risk of cancer by inhalation of very fine dust. In this product, the Titanium dioxide and Crystalline Silica are incorporated into the polymer matrix and are not present as respirable dust. There is no exposure to respirable dust in the normal use of this product. None of the other components are listed as a carcinogen by IARC, NTP, ACGIH or OSHA. Reproductive Toxicity: This product contains Dibutyltin bis(acetylacetonate) which may cause reproductive harm. Germ Cell Mutagenicity: Not classified. Numerical Measures of Toxicity: Product ATE: 6,434.80 mg/kg (Oral), 2,064.40 mg/kg (skin), 213.40 mg/L (Inhalation, vapor), 99,999 mg/L (Inhalation, as dust/mist) N-[3-(Trimethoxysilyl)propyl]-1,2-ethanediamine: Dibutyltin Bis(acetylacetonate): LD50: Oral rat 1,864 mg/kg, LD50: Dermal rat >2,000 mg/kg. 12. Ecological Information Ecotoxicity: Dibutyltin Bis(acetylacetonate): 96 hr LC50 Oryzias Latipes- >2 mg/L, 48 hr EC50 Daphnia magna-0.0036 mg/L, 72 hr EC50 Desmodesmus subspicatus- >2 mg/L. This product is expected to be harmful to the aquatic environment with long-term adverse effects. Releases to the environment should be avoided. Persistence and Degradability: Dibutyltin Bis(acetylacetonate) is not readily biodegradable. Bio accumulative Potential: Not expected to be bio accumulative. Mobility in Soil: No data available. Other Adverse Effects: No data available. 13. Disposal Considerations Dispose of in accordance with all local, state/provincial and federal regulations. Offer empty containers for recycling. 14. Transport Information DOT Hazardous Materials Description: Not regulated. IMDG Dangerous Goods Description: Not regulated. IATA Dangerous Goods Description: Not regulated. Transport in Bulk According to IMO Instruments: Not applicable. Special Precautions for User: Not applicable 15. Regulatory Information United States: EPA TSCA INVENTORY: All the components in this material are listed on the Toxic Substances Control Act (TSCA) Chemical Substances Inventory. CERCLA Section 103: This product is not subject to reporting under CERCLA. Some states have more stringent reporting requirements. Report all spills in accordance with local, state, and federal regulations. SARA Hazard Category (311/312): Classified under OSHA Hazcom 2012 GHS as per Section 2 of this SDS. SARA 313: This product contains the following chemicals subject to Annual Release Reporting Requirements under SARA Title III, Section 313 (40 CFR 372): None California Proposition 65: WARNING: This product can expose you to chemicals including Methanol, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov. 16. Other Information DATE OF CURRENT REVISION: June 7, 2024 REVISION SUMMARY: New SDS DATE OF PREVIOUS REVISION: N/A This information is provided in good faith and is correct to the best of AVM Industries' knowledge as of the date hereof and is designed to assist our customers; however, AVM makes no representation as to its completeness or accuracy. This product is intended for sale to mainly professional contractor. We require customers to satisfy themselves as to the suitability for their specific applications. Any use which AVM Industries customers or third parties make of this information, or any reliance on, or decisions made based upon it, are the responsibility of such customer or third party. AVM Industries disclaims responsibility for damages, or liability of any kind resulting from the use of this information. THERE ARE NO WARRANTIES OR REPRESENTATIONS, EXPRESS OR IMPLIED, INCLUDING THOSE OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE WITH RESPECT TO THIS INFORMATION OR TO THE PRODUCT IT DESCRIBES. IN NO EVENT SHALL AVM INDUSTRIES BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES. 1. Product and Company Identification Product Name: Aussie Shield 300-PLM (Permeable Liquid Membrane) Product Use: Sealant and adhesive Uses Advised Against: None known. Manufacturer: AVM Industries, Inc. 8245 Remmet Ave, Canoga Park CA 91304-4133 www.avmindustries.com Information Phone Number: (818) 888-0050 Emergency Phone Number: Chemtrec 800-424-9300 SDS Date of Preparation: June 24, 2024 2. Hazards Identification GHS Classification: Physical: Health: Not Hazardous GHS Label Elements: None. Hazards not otherwise specified: None. 3. Composition/Information on Ingredients Component CAS No. Amount Limestone 1317-65-3 30-60% Calcium Carbonate 471-34-1 1-<5% Titanium Dioxide* 13463-67-7 1-<5% *Titanium Dioxide in this product is inextricably bound in a manner that no exposure occurs during normal use and handling. Therefore, this product is not classified as a carcinogen. The specific identity and/or exact percentage (concentration) of composition has been withheld as a trade secret. 4. First Aid Measures Inhalation: Remove victim to fresh air. If breathing is difficult or irritation persists, get medical attention. Skin Contact: Wash skin with soap and water. Get medical attention if irritation develops. Eye Contact: Flush eyes thoroughly with water, while holding the eye lids open. Remove contact lenses if present and easy to do and continue rinsing. Get medical attention if irritation persists. Ingestion: Wash mouth with water. Seek medical attention if you feel unwell. Most Important Symptoms: None expected with normal use. May cause slight irritation to eyes, skin, or respiratory tract. May cause irritation and discomfort to the digestive tract. Indication of Immediate Medical Attention/Special Treatment: Immediate medical attention is generally not required. 5. Firefighting Measures Suitable (and Unsuitable) Extinguishing Media: Use any extinguishing media that is appropriate for the surrounding fire. Specific Hazards Arising from the Chemical: Product is not flammable, combustible, or explosive. Special Fire Fighting Procedures: Use measures appropriate for the fire situation. 6: Accidental Release Measures Personal Precautions, Protective Equipment, and Emergency Procedures: Wear appropriate protective clothing. Do not touch or walk through spilled material. Methods and Materials for Containment and Clean-Up: Take up with an absorbent material and collect into an appropriate container for disposal. Environmental Precautions: Report spills and releases as required to appropriate authorities. 7. Handling and Storage Precautions for Safe Handling: Use with adequate ventilation. Avoid inhalation of dust or vapor. Small amounts of methanol (CAS 67-56-1) are formed by hydrolysis and released upon curing. Avoid unnecessary contact with the product. Use appropriate protective clothing and equipment. Wash thoroughly after handling. Remove contaminated clothing and launder before re-use. Do not eat, drink, or smoke in the work area. Keep containers closed when not in use. Empty containers may contain product residue and may be hazardous. Follow all SDS precautions in handling empty containers. Conditions for Safe Storage, Including any Incompatibilities: Store in cool, dry area. Keep containers closed. Store away from strong acids, bases, oxidizers, and moisture. Keep at temperatures between 50 and 95 °F / 10 and 35 °C. 8. Exposure Controls / Personal Protection Exposure Guidelines: CHEMICAL EXPOSURE LIMIT Limestone (Calcium carbonate) 15 mg/m3 TWA OSHA PEL (Total dust) 5 mg/m3 TWA OSHA PEL (Respirable fraction) Calcium Carbonate 15 mg/m3 TWA OSHA PEL (Total dust) 5 mg/m3 TWA OSHA PEL (Respirable fraction) Titanium Dioxide* 0.2 mg/m3 TWA ACGIH TLV (Respirable) nanoscale 2.5 mg/m3 TWA ACGIH TLV (Respirable) finescale 15 mg/m3 TWA (Total dust) OSHA PEL *Titanium Dioxide in this product is inextricably bound in a manner that no exposure occurs during normal use and handling. Appropriate Engineering Controls: Use with adequate general or local exhaust ventilation. Personal Protective Equipment Respiratory Protection: None required for normal use. In operations where the occupational exposure limits are exceeded or exposure levels are excessive, an approved respirator with applicable cartridges or supplied air respirator should be used. Respirator selection and use should be based on contaminant type, form, and concentration. Gloves: None required for normal use. Impervious gloves recommended as needed to avoid prolonged contact. Eye Protection: None required for normal use. Safety glasses with side shields are recommended. Other Protective Equipment/Clothing: Protective clothing as needed to avoid skin contact and contamination of personal clothing. 9. Physical and Chemical Properties Appearance and Color: White solid. Physical State: Solid Odor: None pH: Not applicable Specific Gravity: Not applicable Initial Boiling Point/Range: Not applicable Vapor Pressure: Not applicable Melting/Freezing Point: Not applicable Relative Vapor Density: Not applicable Solubility In Water: Not determined Percent Volatile: Not determined Kinematic Viscosity: Not applicable Evaporation Rate: Not determined Relative Density: 1.44 VOC Content: Not determined Coefficient Of Water/Oil Distribution: Not determined Autoignition Temp: Not applicable Flash Point: Not applicable Flammability (solid, gas): Not applicable Flammability Limits: Not applicable Decomposition Temperature: Not determined Particle Characteristics: Not determined 10. Stability and Reactivity Reactivity: Product cures with moisture. Chemical Stability: Stable under normal storage and handling conditions. Possibility of Hazardous Reactions: Hazardous reactions will not occur under normal conditions of storage and use. Conditions to Avoid: Open flames. Unintentional exposure to moisture. Incompatible Materials: Strong oxidizers, strong acids, and bases. Moisture. Hazardous Decomposition Products: Small amounts of methanol (CAS 67-56-1) are formed by hydrolysis and are released upon curing. 11. Toxicological Information Potential Health Effects: Acute Hazards: Inhalation: Inhalation of may cause slight irritation to mucous membranes and respiratory tract. Skin Contact: May cause slight irritation. Eye Contact: By analogy to another tested similar product: No irritation after contact to the eyes. Ingestion: May cause irritation and discomfort to the digestive tract. Chronic Effects: None known. Carcinogenicity: Not classified. Titanium Dioxide is listed as Possibly Carcinogenic to Humans (Group 2B) by IARC. Titanium dioxide only presents a risk of cancer by inhalation of very fine dust. In this product, the Titanium dioxide is incorporated into the polymer matrix and are not present as respirable dust. There is no exposure to respirable dust in the normal use of this product. None of the other components are listed as a carcinogen by IARC, NTP, ACGIH or OSHA. Reproductive Toxicity: Not classified. Germ Cell Mutagenicity: Not classified. Numerical Measures of Toxicity: Product components are not acutely toxic. 12. Ecological Information Ecotoxicity: This product is not classified as harmful to the aquatic environment. However, this does not exclude the possibility that a large spill could have an adverse effect on the environment. Persistence and Degradability: No data available. Bio accumulative Potential: No data available. Mobility in Soil: No data available. Other Adverse Effects: No data available. 13. Disposal Considerations Dispose of in accordance with all local, state, and federal regulations. Offer empty containers for recycling. 14. Transport Information DOT Hazardous Materials Description: Not regulated. IMDG Dangerous Goods Description: Not regulated. IATA Dangerous Goods Description: Not regulated. Transport in Bulk According to IMO Instruments: Not applicable. 15. Regulatory Information United States: EPA TSCA INVENTORY: All of the components of this material are listed on the Toxic Substances Control Act (TSCA) Chemical Substances Inventory or exempt. CERCLA Section 103: This product is not subject to reporting under CERCLA. Some states have more stringent reporting requirements. Report all spills in accordance with local, state, and federal regulations. SARA Hazard Category (311/312): Classified under OSHA Hazcom 2012 GHS as per Section 2 of this SDS. SARA 313: This product contains the following chemicals subject to Annual Release Reporting Requirements under SARA Title III, Section 313 (40 CFR 372): None California Proposition 65: WARNING: This product can expose you to chemicals including Methanol, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov. 16. Other Information DATE OF CURRENT REVISION: June 24, 2024 REVISION SUMMARY: New SDS DATE OF PREVIOUS REVISION: N/A This information is provided in good faith and is correct to the best of AVM Industries' knowledge as of the date hereof and is designed to assist our customers; however, AVM makes no representation as to its completeness or accuracy. This product is intended for sale to mainly professional contractor. We require customers to satisfy themselves as to the suitability for their specific applications. Any use which AVM Industries customers or third parties make of this information, or any reliance on, or decisions made based upon it, are the responsibility of such customer or third party. AVM Industries disclaims responsibility for damages, or liability of any kind resulting from the use of this information. THERE ARE NO WARRANTIES OR REPRESENTATIONS, EXPRESS OR IMPLIED, INCLUDING THOSE OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE WITH RESPECT TO THIS INFORMATION OR TO THE PRODUCT IT DESCRIBES. IN NO EVENT SHALL AVM INDUSTRIES BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES. DETAIL #: 0300-PLM-1100 Typical Window Flashing Aussie Shiled 300-PLM Aussie Shield 300-PLM INDUSTRIES INC SHEATHING PER PROJECT DESIGN 2" AUSSIE 300-PLF AT 15 MILS INSIDE ROUGH OPENING AND EXTENDING 2 INCHES ONTO TREAT ALL FASTENERS FACE OF SHEATHING WITH AUSSIE 300-PLF AT 15 MILS SHEATHING JOINT 2" AUSSIE 300-PLF AT 15 MILS OVER ALL SHEATHING JOINTS AVM Industries, Inc. 888.414.1041 818.888.0050 8245 Remmet Ave, Canoga Park, CA 91304 Quality Waterproofing Products www.avmindustries.com FILE NAME: 0300-PLM-1100 Protected by Copyright - AVM Industries, Inc. Revision Date 7/19/2024 DETAIL #: 0300-PLM-1102 Typical Window Flashing Aussie Shiled 300-PLM Aussie Shield 300-PLM INDUSTRIES INC AUSSIE 300-PLF LIQUID FLASHING AT 15 MILS OVER ALL SHEATHING JOINTS 2" SHEATHING PER PROJECT DESIGN 2" AUSSIE 300-PLF LIQUID FLASHING AT 15 MILS INSIDE ROUGH OPENING AND TREAT ALL FASTENERS EXTENDING 2 INCHES ONTO WITH AUSSIE 300-PLF AT FACE OF SHEATHING 15 MILS SHEATHING JOINT 2" AUSSIE 300-PLM LIQUID MEMBRANE AT 15 DRY MILS AVM Industries, Inc. 888.414.1041 818.888.0050 8245 Remmet Ave, Canoga Park, CA 91304 Quality Waterproofing Products www.avmindustries.com FILE NAME: 0300-PLM-1102 Protected by Copyright - AVM Industries, Inc. Revision Date 7/19/2024 DETAIL #: 0300-PLM-1110 Sheathing Joint Detailing Aussie Shiled 300-PLM Aussie Shield 300-PLM INDUSTRIES INC SHEATHING JOINT SHEATHING PER PROJECT DESIGN TREAT ALL FASTENERS WITH AUSSIE SEAL 300-PLF AT 15 MILS AUSSIE 300-PLF LIQUID FLASHING AT 15 MILS OVER ALL SHEATHING JOINTS AUSSIE 300-PLM LIQUID MEMBRANE AT 15 DRY MILS 2" AVM Industries, Inc. 888.414.1041 818.888.0050 8245 Remmet Ave, Canoga Park, CA 91304 Quality Waterproofing Products www.avmindustries.com FILE NAME: 0300-PLM-1110 Protected by Copyright - AVM Industries, Inc. Revision Date 7/19/2024 DETAIL #: 0300-PLM-1115 Inside and Outside Corners Aussie Shiled 300-PLM Aussie Shield 300-PLM INDUSTRIES INC AUSSIE 300-PLF LIQUID FLASHING AT ALL INSIDE AND OUTSIDE CORNERS COVERING ANY FASTENERS TREAT ALL FASTENERS WITH AUSSIE 300-PLF AT 15 MILS 2" AUSSIE 300-PLM LIQUID MEMBRANE AT 15 DRY MILS 2" AVM Industries, Inc. 888.414.1041 818.888.0050 8245 Remmet Ave, Canoga Park, CA 91304 Quality Waterproofing Products www.avmindustries.com FILE NAME: 0300-PLM-1115 Protected by Copyright - AVM Industries, Inc. Revision Date 7/19/2024 DETAIL #: 0300-PLM-1120 Typical Penetration Aussie Shiled 300-PLM Aussie Shield 300-PLM INDUSTRIES INC SHEATHING PER