General Information
Revision date
2019-06-24
Product name
ISOPROPYL ETHER
CAS No.
108-20-3
1.2.2. Uses advised against
Not determined
Emergency telephone
01-800-681-9531
Icons in SDS
Company Information
company name
Avantor Performance Materials, LLC
e-mail address of the competent person responsible for the Safety Data Sheet
info@avantormaterials.com
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H225, H316, H335, H336
Hazard statements
Code
Statements
H225
Highly Flammable liquid and vapour
Section 2
Physical hazards
Flammable liquids Category 2
Health hazards
Skin Corrosion/Irritation Category 3 Specific Target Organ Toxicity - Category 3 Single Exposure Specific Target Organ Toxicity - Category 3 Repeated Exposure
Signal word
Danger
Hazard statements
H225: Highly flammable liquid and vapor. H316: Causes mild skin irritation. H335: May cause respiratory irritation. H336: May cause drowsiness or dizziness.
Prevention
P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P233: Keep container tightly closed. P240: Ground and bond container and receiving equipment. P241: Use explosion-proof [electrical/ventilating/lighting] equipment. P242: Use non-sparking tools. P243: Take action to prevent static discharges. P280: Wear protective gloves/eye protection/face protection. P261: Avoid breathing dust/mist/vapors. P271: Use only outdoors or in a well-ventilated area.
Response
P370+P378 In case of fire Use water spray, foam, dry powder or carbon dioxide for extinction. P304+P340 IF INHALED Remove person to fresh air and keep comfortable for breathing. P312: Call a POISON CENTER/doctor if you feel unwell. P303+P361+P353 IF ON SKIN (or hair) Take off immediately all contaminated clothing. Rinse skin with water [or shower]. P332+P313 If skin irritation occurs Get medical advice/attention
Storage
P403+P235: Store in a well-ventilated place. Keep cool. P233: Keep container tightly closed. P405: Store locked up.
Disposal
P501: Dispose of contents/container to an appropriate treatment and disposal facility in accordance with applicable laws and regulations, and product characteristics at time of disposal.
