ARMORFLEX 953 GELCOAT WHITE

Aurora Glass Fibre (NZ) Ltd

Revision date : 2019-03-26

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.
GHS02 GHS07 GHS08
Health risk rating 4
Safety risk rating 2
Environmental risk rating 1

Note: Ingredients listed on restricted chemical lists

EC/CAS

100-42-5

Name of the chemical

Styrene ( Vinyl benzene )

Concentration

N/A

EC/CAS

13463-67-7

Name of the chemical

Reaction mass of titanium dioxide and silver chloride

Concentration

N/A

EC/CAS

80-62-6

Name of the chemical

methacrylic acid, methyl ester

Concentration

N/A

EC/CAS

64742-95-6

Name of the chemical

Solvent naphtha (petroleum), light aromatic; Low boiling point naphtha — unspecified (A complex combination of hydrocarbons obtained from distillation of aromatic streams. It consists predominantly of aromatic hydrocarbons having carbon numbers predominantly in the range of C8 through C10 and boiling in the range of approximately 135 °C to 210 °C.)

Concentration

N/A

EC/CAS

100-41-4

Name of the chemical

Ethylbenzene

Concentration

N/A

Listed in

General Information

Revision date

2019-03-26

Product name

ARMORFLEX 953 GELCOAT WHITE

Manufacturer Name

Polynt Composites Australia Pty Ltd

Icons in SDS

Company Information

company name

Aurora Glass Fibre (NZ) Ltd

GHS Information

Signal word

Danger

Hazard Codes

Hazard statements (CLP)

H226, H315, H317, H319, H332, H351, H361, H372

Hazard statements

Code

Statements

H226

Flammable liquid and vapour

H315

Causes skin irritation

H317

May cause an allergic skin reaction

H319

Causes serious eye irritation

H332

Harmful if inhaled

H351

Suspected of causing cancer

H361

Suspected of damaging fertility or the unborn child

H372

Causes damage to organs through prolonged or repeated exposure

Section 2

SECTION 2: Hazards identification

Classified as Hazardous according to the New Zealand Hazardous Substances Regulations. Classified as Dangerous Goods for transport according to New Zealand Standard. This product is classified as: Xn, Harmful. Xi, irritating. F, Flammable. Hazardous according to the criteria of SWA. Dangerous according to Australian Dangerous Goods (ADG) Code, IATA and IMDG/IMSBC criteria.

ADG classification

Class 3

UN Number

1866, Resin Solution, Flammable EPA New Zealand Approval Code: HSR001221

HSNO Classifications

3.1C Flammable Liquid 6.1E Acute Toxicity, Oral/Dermal 6.1D Acute Toxicity, Inhalation 6.3A Substance that is corrosive or irritating to the skin 6.4A Substance that is corrosive or irritating to the eye 6.6B Suspected human mutagen 6.7B Suspected human carcinogen 6.9B May cause damage to target organs through prolonged/repeated exposure 9.1C Aquatic ecotoxicity, Fish

Hazard statements

H226 Flammable liquid and vapour H315 Causes skin irritation H317 May cause an allergic reaction H319 Causes serious eye irritation H332 Harmful if inhaled H351 Suspected of causing cancer H361 Suspected of damaging fertility or the unborn child H372 Causes damage to organs through prolonged or repeated exposure

Prevention

P201 Obtain special instruction before use P202 Do not handle until all safety precautions have been read and understood P210 Keep away from heat, sparks, open flames and hot surfaces. – No smoking P240 Ground/bond container and receiving equipment P241 Use explosion-proof electrical ventilating, lighting and other equipment P242 Use only non-sparking tools P243 Take precautionary measures against static discharge P260 Do not breath fumes, mists, vapours or spray P262 Do not get in eyes, on skin, or on clothing P270 Do not eat, drink or smoke when using this product P280 Wear protective gloves, protective clothing and eye or face protection

Response

P314 Get medical advice or attention if you feel unwell P330 Rinse mouth P362 Take off contaminated clothing and wash before reuse P301+P312 IF SWALLOWED: Call a Poison Centre or doctor P302+P352 IF ON SKIN: Wash with plenty of soap and water P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing P308+P313 If exposed or concerned: Get medical advice P333+P313 If skin irritation or rash occurs: Get medical advice P337+P313 If eye irritation persists: Get medical advice P370+P378 In case of fire, use carbon dioxide, dry chemical, water fog. Alcohol resistant foam is the preferred firefighting medium, but if it is not available, normal foam can be used

Storage

P405 Store locked up P422 Store contents below 25oC P403+P233 Store in well ventilated place. Keep container tightly closed

Disposal

P501 Dispose of contents to an approved waste disposal plant Emergency Overview Physical Description & Colour: White liquid Odour: Moderate aromatic

Health hazards

Acute exposure to styrene in humans results in respiratory effects, such as mucous membrane irritation, eye irritation, and gastrointestinal effects. Styrene vapour causes mild irritation of the nose and throat at concentrations around 100 ppm, definite irritation at 350-500 ppm and severe irritation at about 500 ppm. Symptoms such as headache, dizziness and fatigue (similar in some ways to drunkenness) are reported at concentrations above 100-200 ppm. Other symptoms such as slower reaction times, reduced manual dexterity, and impaired co-ordination and balance can be observed at concentrations above 200 ppm. Styrene liquid can cause mild to severe irritation of the eyes in splashing occurs. Styrene liquid defats the skin and can cause dermatitis. Irritating to eyes, respiratory system and skin, harmful if inhaled, possible skin sensitiser.

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.