Note: Ingredients listed on restricted chemical lists
EC/CAS
9016-87-9
Name of the chemical
4,4'-Methylendiphenyldiisocyanat tech. (Polymeres) MDI, pMDI (in Form atembarer Aerosole, A-Fraktion)
Concentration
100.0
EC/CAS
101-68-8
Name of the chemical
4,4’-Methylenediphenyl diisocyanate
Concentration
40.0-50.0
General Information
Revision date
2015-10-01
Product name
MEMBRANE 88 PART 2 (ACCELERATOR)
Chemical name
Pure substance - Aromatic isocyanates
1.2.2. Uses advised against
Professional Use Only
supplier name
Atlas Minerals and Chemicals Inc
Manufacturer Name
Atlas Minerals and Chemicals Inc
Emergency telephone
1-800-424-9300, 703-527-3887
Icons in SDS
Company Information
company name
Atlas Minerals and Chemicals Inc
GHS Information
Signal word
DANGER!
Hazard Codes
Hazard statements (CLP)
H315, H317, H320, H332, H334, H335, H373
Hazard statements
Code
Statements
H315
Causes skin irritation
Section 2
SECTION 2: Hazards identification
(29 CFR 1910.1200) Classification of the chemical Dark liquid. Musty odour
Signal word
DANGER!
Hazard statements
Harmful if inhaled. Causes skin irritation. Causes eye irritation. May cause allergy or asthma symptoms or breathing difficulties if inhaled. May cause an allergic skin reaction. May cause respiratory irritation. May cause damage to organs through prolonged or repeated exposure.
Precautionary statements
Do not breathe dust, mist or vapours. Wash skin thoroughly after handling. Use only outdoors or in a well-ventilated area. Contaminated work clothing must not be allowed out of the workplace. Wear protective gloves. Wear respiratory protection. If on skin: Wash with plenty of soap and water. If skin irritation or rash occurs: Get medical advice/attention. Take off contaminated clothing and wash it before reuse. If inhaled: Remove person to fresh air and keep comfortable for breathing. Call a POISON CENTER or doctor/physician if you feel unwell. If experiencing respiratory symptoms: Call a POISON CENTER or doctor/physician. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: get medical advice/attention. Store in a well-ventilated place. Keep container tightly closed. Store locked up. Dispose of contents/container in accordance with local regulation.
Other hazards which do not result in classification
Toxic fumes may be released during a fire. May polymerize when heated or on contact with incompatible materials. May react with water. May cause gastrointestinal irritation. Prolonged or repeated contact may cause a hardening or tanning effect. Environmental precautions: Avoid release to the environment. See Section 12 for more environmental information.
2.1 Classification of the substance or mixture
Most important hazards: This material is classified as hazardous under U.S. OSHA regulations (29CFR 1910.1200) (Hazcom 2012) and Canadian WHMIS regulations (Hazardous Products Regulations) (WHMIS 2015). Hazardous classification (Supplier's classification): Acute toxicity - Category 4 (Inhalation) Skin corrosion/irritation - Category 2 Eye damage/irritation - Category 2B Respiratory sensitization - Category 1 Skin sensitization - Category 1 Specific target organ toxicity, single exposure - Category 3 (Respiratory irritation) Specific target organ toxicity, repeated exposure - Category 2 Label elements