Flex Crax HD

Hazardous Ingredients

CAS # ACGIH TLV OTHER LIMITS PERCENT Petroleum Asphalt 8052-42-4 5 mg/m3 >=10.0-<=75.0% Petroleum Distillate 64741-96-4 10 mg/m3 >= 0.0-<=10.0% Mineral Filler 1317-65-3 10 mg/m3 >=15.0-<=75.0% Styrene-Butadiene Copolymer 9003-55-8 10 mg/m3 >= 5.0-<=20.0% Vulcanized,Ground Rubber N/A N/E >= 5.0-<=30.0% Styrene-Isoprene Copolymer 25038-32-8 10 mg/m3 >= 5.0-<=10.0% Polyester Fibers 25038-59-9 N/E >= 1.0-<= 8.0% SECTION III - PHYSICAL CHEMICAL CHARACTERISTICS Appearance: Black/Dark Brown Solid Odour: Petroleum Boiling Point: >750oF pH Level: N/A Vapor Pressure: Not Determined Evaporation (Butyl Acetate = 1); <1 Vapor Density (Air = 1): Not Determined Water Solubility: Negligible Specific Gravity (H20=1): 1.10 - 1.30 1 RW Materials: RW306R / RW306RH / RW306P / RW306PH / RW306PLG / RW306CS Issue Date: 06/15 SECTION IV - FIRE AND EXPLOSION HAZARD DATA Flash point (COC) >450oF Autoignition Temperature: >700oF Extinguishing Media: Carbon Dioxide, Dry Chemical or Foam. Special Fire Fighting Procedures: Keep people away. Isolate fire and deny unnecessary entry. To extinguish these products use ,Carbon Dioxide, Dry Chemical or Foam. Use breathing apparatus in enclosed areas where there is heavy smoke. Unusual Fire and Explosion Hazards: This material may ignite when sufficient heat is applied. Upon burning, this product will generates dense black smoke. Hazardous Combustion Products: Under fire conditions some components of this product may decompose. The smoke may contain unidentified toxic and / or irritating compounds. Combustion products may include and are not limited to: Carbone dioxide, Carbon monoxide, Sulfur dioxide and Hydrogen sulfide. Dense smoke. SECTION V - REACTIVITY DATA Stability/ Stable Conditions to Avoid: None known. Incompatible Materials: Strong oxidizing agents. Hazardous Polymerization: Will not occur. Thermal Decomposition: Decomposition products depend upon temperature, air supply and the presence of other materials. SECTION VI - HEALTH HAZARD DATA OSHA Hazard Communication Standard This product is not a "Hazardous Chemical" as defined by the OSHA Hazard Communication Standard, 29 CFR 1910.1200 Potential Health Effects Inhalation: Inhalation of fumes or vapors can produce irritation of mucous membranes and upper respiratory tract. May cause nausea, dizziness and headaches if prolonged exposer to hot asphalt fumes . Skin Contact:Direct contact with hot material will cause thermal burns.Prolonged exposure may cause dermatitis,drying or irritation. Ingestion: Irritating to mucous membranes and gastrointestinal tract. May cause thermal burns as well as nausea,vomiting and diarrhea. Aspiration of material into lungs may produce pulmonary edema and chemical pneumonitis. Eye Contact: Direct contact with hot material will cause thermal burns, and exposer to vapors and fumes may cause irritation.