XYRON

SECTION 2: Hazards identification

GHS Classification Classification of the chemical GHS-Classification]

Physical hazards

Classification not possible

Health hazards

_ Classification not possible

Environmental hazards

Classification not possible Other Hazards Non

Hazard pictograms

Non

Signal word

Non

Hazard statements

- Non Special Hazard Gas is generated in melted condition. Can burn in a fire.

Precautionary statements

Safety measures Do not handle until all safety precautions have been read, understood and precautionary measures are taken. Do not eat, drink or smoke when using this product. Wear protective gloves, eye-protection if necessary. Take burn pre- vention measures especially when handling melted resin. Install effective local exhaust in extrusion press because gas is gen- erated. 3. Composition and information of the ingredients of the hazardous chemical Chemical name or generic name; Mixture of Poly (phenylene ether), styrenic resin, elastomer, and aromatic phosphate ester. Product Name: 240V, 240VF, 250V, 340V, 381V Product Name Contents[wt%] CAS No. Components EINECS No. 24ov_ | 240ve | 250v | 34ov | 3e8tVv AsahiKASEI 3/ 18 Product name XYRON (PS) SDS Ref. No.: XY-W022-2 FirstIlssue Mar. 24, 2014 SAFETY DATA SHEET Revised Issue: May 11, 2018 Poly(2,6-dimethyl-1,4-phenylene ether) 30-40 35-45 45-55 25134-01-4 N/A Polystyrene 9003-53-6 . ys ; 40-50 35-45 25-35 20-30 and/or N/A High Impact polystyrene 9003-55-8 66070-58-4 Styrenic Elastomer 0-3 and/or N/A Confidential Elastomer 0-3 Confidential N/A 181028-79-5 Aromatic phosphate ester 10-20 or 425-220-8 5945-33-5 Additives (Stabilizer etc.) <3 Confidential Registered Petroleum hydrocarbon oil (Mineral oil) <1 Confidential Registered Colorant 0-6 See Appendix Total 100 - Product Name: 540V, 640V, 581V, 740V Product N Contents[wt% rears wt] CAS No. EINECS No. Components 540V 640V 581V 740V Poly(2,6-dimethyl-1,4-phenylene ether) 55-65 60-70 55-65 65-75 25134-01-4 N/A Polystyrene 9003-53-6 . ysy , 20-30 25-35 20-30 and/or N/A High Impact polystyrene 9003-55-8 66070-58-4 Styrenic Elastomer 0-3 and/or N/A Confidential Elastomer 0-3 Confidential N/A 181028-79-5 Aromatic phosphate ester 5-15 2-10 or 425-220-8 5945-33-5 Additives (Stabilizer etc.) <3 Confidential Registered Petroleum hydrocarbon oil (Mineral oil) <1 Confidential Registered Colorant 0-6 See Appendix Total 100 - Product Name: 240W, 340W, 240Z, 241Z, 281Z Product N reauame Contents[wt% wel CAS No. EINECS No. Components 240W 340W 240Z 2412 2812 Poly(2,6-dimethyl-1,4-phenylene ether) 25-35 30-40 45-55 25134-01-4 N/A sigh Im an nv cwvrene Polystyrene 55-65 | 50-60 | 25-35 | 20-30 | 25-35 9003-53-6 and/or N/A gi impact Polysty 9003-55-8 66070-58-4 Styrenic Elastomer 0-3 and/or N/A Confidential Elastomer 0-3 Confidential N/A 181028-79-5 Aromatic phosphate ester 3-10 10-20 or 425-220-8 5945-33-5 Additives (Stabilizer etc.) <3 Confidential Registered Petroleum hydrocarbon oil (Mineral oil) <1 Confidential Registered Colorant 0-6 See Appendix Total 100 - Product Name: 340Z, 3422, 3812, 340ZF, BT30Z Contents[wt% Product Name wr CAS No. EINECS No. Components 340Z 342Z 381Z 340ZF BT30Z Poly(2,6-dimethyl-1,4-phenylene ether) 50-60 55-65 50-60 25134-01-4 N/A Polystyrene High Im and sivetyrene 9003-53-6 15-25 | 15-25 | 20-30 | 20-30 | 15-25 and/or N/A gn impact polysty 9003-55-8 AsahiKASEI 4/ 18 Product name XYRON (PS) SDS Ref. No.: XY-W022-2 FirstIlssue Mar. 24, 2014 SAFETY DATA SHEET Revised Issue: May 11, 2018 66070-58-4 Styrenic Elastomer 0-3 and/or N/A Confidential Elastomer 0-3 Confidential N/A 181028-79-5 Aromatic phosphate ester 10-20 12-22 10-20 or 425-220-8 5945-33-5 Additives (Stabilizer etc.) <3 Confidential Registered Petroleum hydrocarbon oil (Mineral oil) <1 Confidential Registered Colorant 0-6 See Appendix Total 100 - Product Name: 4402, 540Z, 5812, 640Z, 644Z, 744Z, BT50Z, PV50Z Contents[wt%] Product Name 5402 CAS No. EINECS No. Components 440Z 581Z 640Z 644Z 744Z BT50Z PV50Z Poly(2,6-dimethyl-1,4- 55-65 | 60-70 | 65-75 | 70-80 | 75-85 | 60-70 | 25134-01-4 N/A phenylene ether) Polystyrene High Im ad Ivetyrene 15-25 | 10-20 9003-53-6 | 10-20 3-10 10-20 and/or N/A gn impact polysty 9003-55-8 66070-58-4 Styrenic Elastomer 0-3 and/or N/A Confidential Elastomer 0-3 Confidential N/A 181028-79-5 Aromatic phosphate ester 10-20 5-15 or 425-220-8 5945-33-5 Additives (Stabilizer etc.) <3 Confidential Registered Petroleum hydrocarbon ol <1 Confidential Registered (Mineral oil) Colorant 0-6 See Appendix Total 100 - Product Name: F144Z, R240Z, R340Z, 442Z, PV40Z, XS700 Product N Contents[wt%] roduermame 442Z CAS No. EINECS No. Components F144Z R240Z R340Z X$700 PV40Z Poly(2,6-dimethyl-1,4-phenylene ether) 30-40 40-50 45-55 60-70 75-85 25134-01-4 N/A Polystyrene High Im and sivetyrene 45-55 9003-53-6 | 25-35 | 20-30 0-5 and/or N/A gn impact polysty 9003-55-8 66070-58-4 Styrenic Elastomer 0-3 10-20 3-10 and/or N/A Confidential Elastomer 0-3 Confidential N/A 181028-79-5 Aromatic phosphate ester 10-20 or 425-220-8 5945-33-5 Additives (Stabilizer etc.) <3 Confidential Registered Petroleum hydrocarbon oil(Mineral oil) <1 Confidential Registered Colorant 0-6 See Appendix Total 100 - Product Name: 1950#, 1951#, TVO7#, TVO8#, TV10# (# A~Z) Product Name Contents[wt%] CAS No. EINECS No. 1) Components 1950# 1951# TVO7# TV08# TV10# Poly(2,6-dimethyl-1,4-phenylene ether) 20-30 25-35 30-40 35-45 25134-01-4 N/A Polystyrene High Im and sivetyrene 50-60 9003-53-6 | 50-60 | 40-50 | 35-45 | 35-45 and/or N/A gn impact polysty 9003-55-8 66070-58-4 Styrenic Elastomer 0-3 and/or N/A Confidential Elastomer 0-3 Confidential N/A AsahiKASEI 5/ 18 Product name XYRON (PS) SDS Ref. No.: XY-W022-2 FirstIlssue Mar. 24, 2014 SAFETY DATA SHEET Revised Issue: May 11, 2018 181028-79-5 Aromatic phosphate ester 10-20 15-22 or 425-220-8 5945-33-5 Additives (Stabilizer etc.) <3 Confidential Registered Petroleum hydrocarbon oil (Mineral oil) <1 1-3 Confidential Registered Colorant 0-6 See Appendix Total 100 - Product Name: FL50V, VN30V, WH100, CN50V, CN51V, VN50Z Product Name Contents[wt%] CAS No. EINECS No. Components FL50V VN30V WH100 CN50V CN51V VN50Z Poly(2,6-dimethyl-1,4-phenylene ether) 55-65 35-45 40-50 55-65 50-70 60-70 25134-01-4 N/A Polystyrene High Im ad Ivetyrene 15-25 | 25-35 9003-53-6 0-10 5-15 1020 0-5 and/or N/A gn impact polysty 9003-55-8 66070-58-4 Styrenic Elastomer 0-3 15-25 30-40 15-25 5-20 15-25 and/or N/A Confidential Elastomer 3-10 0-3 03 0-3 Confidential N/A 181028-79-5 Aromatic phosphate ester 5-15 515 5-15 or 425-220-8 5945-33-5 Additives (Stabilizer etc. ) <3 Confidential Registered Petroleum hydrocarbon oil(Mineral oil) <1 1-5 <1 Confidential Registered Colorant 0-6 See Appendix Total 100 - Product Name: SZ800, X4310 Product Name Contents[wt%] CAS No. EINECS No. 1) Components $Z800 | X4310 Poly(2,6-dimethyl-1,4-phenylene ether) 75-85 50-60 25134-01-4 N/A Polystyrene 9003-53-6 High Im act olystyrene gn impact 3-10 polysty 15-25 and/or N/A 9003-55-8 66070-58-4 Styrenic Elastomer 3-10 and/or N/A Confidential Elastomer 0-3 Confidential N/A 181028-79-5 Aromatic phosphate ester 3-10 10-20 or 425-220-8 5945-33-5 Additives (Stabilizer etc.) <3 Confidential Registered Petroleum hydrocarbon oil (Mineral oil) <1 1-3 Confidential Registered Colorant 0-6 See Appendix Total 100 - Chemical name or generic name; Mixture of Poly (phenylene ether) , styrenic resin, elastomer, aromatic phosphate ester and Inorganic filler. Product Name: X331V_, G601V, G601Z, G544V, X603V Product Name Contents[wt%] Components X331V | Geo1v | Geo1z | G54av | x603V AS No. EINECS No. CAS No CS No Poly(2,6-dimethyl-1,4-phenylene ether) 25134-01-4 20-30 N/A 45-55 - 30-40 35-45 Poly(2,6-dimethyl-1,4-phenylene ether), maleated 60-70 219136-76-2 N/A 9003-53-6 Polystyrene, and/or High Impact polystyrene 35-45 30-40 0-10 15-25 9003-55-8 N/A Styrenic copolymer and/or Confidential 66070-58-4 Styrenic Elastomer 0-3 3-10 0-3 and/or N/A Confidential Elastomer 0-3 Confidential N/A Aromatic phosphate ester 5-15 15-25 10-20 3-10 181028-79-5 425-220-8 a 6/ 18 AS a h | KASE | Product name XYRON (PS) SDS Ref. No.: XY-W022-2 FirstIlssue Mar. 24, 2014 SAFETY DATA SHEET Revised Issue: May 11, 2018 or 5945-33-5 Inorganic filler (Glass fiber, Glass flake) 5-15 30-40 25-35 65997-17-3 266-046-0 Additives (Stabilizer etc. ) <3 Confidential Registered Petroleum hydrocarbon oil(Mineral oil) <1 Confidential Registered Colorant 0-6 See Appendix Total 100 - Product Name: L524V, L554V, L654V Product Name Contents[wt%] Components Prost Name L524v | L554v | Lesav CAS No. EINECS No. Poly(2,6-dimethyl-1,4-phenylene ether) 25134-01-4 N/A Poly(2,6-dimethyl-1,4-phenylene ether), maleated 20-30 30-40 219136-76-2 N/A 9003-53-6 Polystyrene, and/or High Impact polystyrene 25-30 15-25 10-20 9003-55-8 N/A Styrenic copolymer and/or Confidential 66070-58-4 Styrenic Elastomer 0-3 and/or N/A Confidential Elastomer 0-3 Confidential N/A 181028-79-5 Aromatic phosphate ester 3-10 or 425-220-8 5945-33-5 Inorganic filler (Glass fiber, Glass flake) 35-45 65997-17-3 266-046-0 Additives (Stabilizer etc. ) <3 Confidential Registered Petroleum hydrocarbon oil(Mineral oil) <1 Confidential Registered Colorant 0-6 See Appendix Total 100 - Product Name: 40W, X1104, X1106, X1232 Product Name Contensiwt CAS No. EINECS No Components 40w X1104 X1106 X1232 Poly(2,6-dimethyl-1,4-phenylene ether) 25134-01-4 N/A Poly(2,6-dimethyl-1,4-phenylene ether), maleated 15-25 29-35 19-28 29-38 219136-76-2 N/A Polystyrene, 9003-53-6 High Impact polystyrene 60-70 15-25 35-45 30-40 and/or N/A 9003-55-8 66070-58-4 Styrenic Elastomer 0-3 and/or N/A Confidential Elastomer 0-3 Confidential N/A 181028-79-5 Aromatic phosphate ester 5-15 or 425-220-8 5945-33-5 65997-17-3 266-046-0 Inorganic filler (Glass fiber, Glass flake, Mineral) and/or 0-5 30-40 25-35 15-25 14807-96-6 238-877-9 and/or 12001-26-2 N/A Quartz <0.1 <0.2 <0.15 <0.1 14808-60-7 238-87 8-4 Additives (Stabilizer etc.) <3 Confidential Registered Petroleum hydrocarbon oil(Mineral oil) <1 Confidential Registered Colorant 0-6 See Appendix | See Appendix Total 100 - Product Name: X1107, X1108, X1109, X1110 Product Name Content CAS No. EINECS No Components X1107 X1108 X1109 X1110 Poly(2,6-dimethyl-1,4-phenylene ether) 25134-01-4 N/A Poly(2,6-dimethyl-1,4-phenylene ether), maleated 20-30 29-38 25-39 219136-76-2 N/A Polystyrene, 9003-53-6 High Impact polystyrene 25-35 20-30 and/or N/A 9003-55-8 AsahiKASEI 7/ 18 Product name XYRON (PS) SDS Ref. No.: XY-W022-2 FirstIlssue Mar. 24, 2014 SAFETY DATA SHEET Revised Issue: May 11, 2018 66070-58-4 Styrenic Elastomer 0-3 and/or N/A Confidential Elastomer 0-3 Confidential N/A 181028-79-5 Aromatic phosphate ester 5-15 or 425-220-8 5945-33-5 65997-17-3 266-046-0 Inorganic filler (Glass fiber, Glass flake, Mineral) and/or 25-35 30-40 14807-96-6 238-877-9 and/or 12001-26-2 N/A Quartz <0.15 <0.2 14808-60-7 238-878-4 Additives (Stabilizer etc.) <3 Confidential Registered Petroleum hydrocarbon oil(Mineral oil) <1 Confidential Registered Colorant 0-6 See Appendix | See Appendix Total 100 - Product Name: X332V, X333V, X343V, X344V, X364V, X444V Product Name Contents[wt%] Components Xa32V_]| x333v | xa4av | xa44v_] xaeav | xazay | CASNO- EINECS No Poly(2,6-dimethyl-1,4-phenylene ether) 25134-01-4 N/A Poly(2,6-dimethyl-1 “pnenyiene ether), maleat- 20-30 15-25 20-30 25-35 219136-76-2 NA Polystyrene, 9003-53-6 High Impact polystyrene 40-50 35-45 25-35 20-30 15-25 20-30 and/or N/A 9003-55-8 66070-58-4 Styrenic Elastomer 0-3 and/or N/A Confidential Elastomer 0-3 Confidential N/A 181028-79-5 Aromatic phosphate ester 5-15 or 425-220-8 5945-33-5 65997-17-3 266-046-0 Inorganic filler . and/or 15-25 and/or 25-35 35-45 20-30 30-40 14807-96-6 238-877-9 (Glass fiber, Glass flake, Mineral) and/or 12001-26-2 N/A Quartz <0.1 <0.15 <0.3 <0.2 14808-60-7 238-878-4 Additives (Stabilizer etc. ) <3 Confidential Registered Petroleum hydrocarbon oll <1 Confidential Registered (Mineral oil) Colorant 0-6 See Appendix Total 100 - Product Name: X523V, X583V Product Name Contents[wt%] components Pret X523V_|_X583V CAS No. EINECS No Poly(2,6-dimethyl-1,4-phenylene ether) 25134-01-4 N/A Poly(2,6-dimethyl-1,4-phenylene ether), maleated 30-40 219136-76-2 N/A Polystyrene, 9003-53-6 High Impact polystyrene 15-25 and/or N/A 9003-55-8 66070-58-4 Styrenic Elastomer 0-3 and/or N/A Confidential Elastomer 0-3 Confidential N/A 181028-79-5 Aromatic phosphate ester 5-15 or 425-220-8 5945-33-5 65997-17-3 266-046-0 Inorganic filler and/or (Glass fiber, Glass flake, Mineral) 25-35 14807-96-6 238-877-9 and/or 12001-26-2 N/A Quartz <0.3 <0.15 14808-60-7 238-878-4 Additives (Stabilizer etc.) <3 Confidential Registered Petroleum hydrocarbon oil (Mineral oil) <1 Confidential Registered Colorant 0-6 See Appendix Total 100 - AsahiKASEI 8/ 18 Product name XYRON (PS) SDS Ref. No.: XY-W022-2 FirstIlssue SAFETY DATA SHEET Mar. 24, 2014 Revised Issue: May 11, 2018 Product Name: NC42Z Product Name Contents[wt%] Components NC42Z CAS No. EINECS No Poly(2,6-dimethyl-1,4-phenylene ether) 50-60 25134-01-4 N/A Poly(2,6-dimethyl-1,4-phenylene ether), maleated 219136-76-2 N/A Polystyrene, 9003-53-6 High Impact polystyrene 0-s and/or N/A 9003-55-8 66070-58-4 Styrenic Elastomer 3-10 and/or N/A Confidential Elastomer 0-3 Confidential N/A 181028-79-5 Aromatic phosphate ester 10-20 or 425-220-8 5945-33-5 Inorganic filler (Mineral) 10-20 1332-58-7 310-194-1 Additives (Stabilizer etc. ) <3 Confidential Registered Petroleum hydrocarbon oil(Mineral oil) <1 Confidential Registered Colorant 0-6 See Appendix See Ap- pendix Total 100 - Product Name: L542V, L542Z, L543V, L543Z, L544V Product Name 1) conte CAS No. EINECS No Components L542V L542Z L543V L543Z L544V Poly(2,6-dimethyl-1,4-phenylene ether) 25134-01-4 N/A Poly(2,6-dimethyl-1,4-phenylene ether), maleated 30-40 49-99 29-35 30-40 20-30 219136-76-2 N/A 9003-53-6 Polystyrene and/or High Impact polystyrene 30-40 10-20 25-35 5-15 20-30 9003-55-8 N/A Styrenic copolymer and/or Confidential 66070-58-4 Styrenic Elastomer 0-3 and/or N/A Confidential Elastomer 0-3 Confidential N/A 181028-79-5 Aromatic phosphate ester 3-10 10-20 3-10 5-15 3-10 or 425-220-8 5945-33-5 65997-17-3 266-046-0 Inorganic filler and/or . And/or . 15-25 25-35 35-45 14807-96-6 238-877-9 (Glass fiber, Glass flake, Mineral) and/or And/or 12001-26-2 N/A Quartz <0.1 <0.15 <0.2 14808-60-7 238-87 8-4 Additives (Stabilizer etc.) <3 Confidential Registered Petroleum hydrocarbon oil(Mineral oil) <1 Confidential Registered Colorant 0-6 See Appendix Total 100 - Product Name: L564V, L564Z, L565V Product Name Contents[wt%] components Prete Nae L564V L564Z L565V CAS No. EINECS No Poly(2,6-dimethyl-1 ,4-phenylene ether) 20-30 25-35 20-30 25134-01-4 N/A Poly(2,6-dimethyl-1,4-phenylene ether), maleated 219136-76-2 N/A 9003-53-6 Polystyrene, and/or High Impact polystyrene 25-35 10-20 9003-55-8 N/A Styrenic copolymer and/or Confidential 66070-58-4 Styrenic Elastomer 0-3 and/or N/A Confidential Elastomer 0-3 Confidential N/A 181028-79-5 Aromatic phosphate ester 3-10 or 425-220-8 5945-33-5 65997-17-3 266-046-0 Inorganic filler 35-45 45-55 and/or (Glass fiber, Glass flake, Mineral) 14807-96-6 238-877-9 and/or ASANiIKASEL — eenzrere sons a 9/ 18 SDS Ref. No.: XY-W022-2 FirstIlssue Mar. 24, 2014 SAFETY DATA SHEET Revised Issue: May 11, 2018 12001-26-2 N/A Quartz <0.2 <0.25 14808-60-7 238-87 8-4 Additives (Stabilizer etc. ) <3 Confidential Registered Petroleum hydrocarbon oil(Mineral oil) <1 Confidential Registered Colorant 0-6 See Appendix Total 100 - Product Name: L574V, L574Z, X1744, X1745, X7744 Contents[wt% Product Name wre CAS No. | EINECS No Components L574V L574Z X1744 X1745 X71744 Poly(2,6-dimethyl-1,4-phenylene ether) 25134-01-4 N/A 25-35 -76- Poly(2,6-dimethyl-1,4-phenylene ether), maleated ener 76 N/A 9003-53-6 Polystyrene, and/or High Impact polystyrene, 10-20 15-25 9003-55-8 N/A Styrenic Copolymer and/or Confidential 66070-58-4 Styrenic Elastomer 0-3 and/or N/A Confidential Elastomer 0-3 Confidential N/A 181028-79- Aromatic phosphate ester 3-10 5-15 ° 425-220-8 5945-33-5 65997-17-3 266-046-0 Inorganic filler . g . and/or 35-45 and/or 35-45 30-40 14807-96-6 238-877-9 (Glass fiber, Glass flake, Mineral) and/or 12001-26-2 N/A Quartz <0.2 <0.1 14808-60-7 238-87 8-4 Additives (Stabilizer etc.) <3 Confidential Registered Petroleum hydrocarbon oil(Mineral oil) <1 Confidential Registered Colorant 0-6 See Appen- | See Appen- dix Total 100 - Product Name: VT31V, VT31Z, VT51V, VT32V, VT52Z Product Name Contents[wt%] Components vTsiv | v13iz | vi5iv | vis2v | vts2z AS No. EINECS N CAS No CS No Poly(2,6-dimethyl-1,4-phenylene ether) 25134-01-4 N/A 35-45 40-50 30-40 45-55 Poly(2,6-dimethyl-1,4-phenylene ether), maleated 219136-76-2 N/A Polystyrene High Im and sivetyrene 15-25 9003-53-6 5-15 10-20 | 10-20 3-10 and/or N/A gn impact polysty 9003-55-8 66070-58-4 Styrenic Elastomer 10-20 102-0 10-20 and/or N/A Confidential Elastomer 0-3 Confidential N/A 181028-79-5 Aromatic phosphate ester 5-15 10-20 5-15 10-20 or 425-220-8 5945-33-5 14807-96-6 238-877-9 Inorganic filler (Mineral) 5-15 15-25 and/or 12001-26-2 N/A Additives (Stabilizer etc.) <3 Confidential Registered Petroleum hydrocarbon oil(Mineral oil) <1 Confidential Registered Colorant 0-6 See Appendix Total 100 - Product Name: X351V, X551V, X352V, X552V Product Name Contents[wt%] AS No. components EINECS N Pct X351V | X551V | X352V | X552V CAS No CS No Poly(2,6-dimethyl-1,4-phenylene ether) 25134-01-4 N/A 30-40 40-50 25-35 35-45 Poly(2,6-dimethyl-1,4-phenylene ether), maleated 219136-76-2 N/A Polystyrene High Im ve, svetyrene 9003-53-6 40-50 | 30-40 | 30-40 | 25-35 and/or N/A gn impact polysty 9003-55-8 AsahiKASEI 10/ 18 Product name XYRON (PS) SDS Ref. No.: XY-W022-2 FirstIlssue Mar. 24, 2014 SAFETY DATA SHEET Revised Issue: May 11, 2018 66070-58-4 Styrenic Elastomer 0-3 and/or N/A Confidential Elastomer 0-3 Confidential N/A 181028-79-5 Aromatic phosphate ester 5-15 3-10 or 425-220-8 5945-33-5 14807-96-6 238-877-9 Inorganic filler (Mineral) 5-15 15-25 and/or 12001-26-2 N/A Additives (Stabilizer etc.) <3 Confidential Registered Petroleum hydrocarbon oil(Mineral oil) <1 Confidential Registered Colorant 0-6 See Appendix | See Appendix Total 100 - Product Name: Z352V, Z703V components Pct Contents[wt”] CAS No. EINECS No Components Z352V Z703V Poly(2,6-dimethyl-1,4-phenylene ether) 25-35 40 - 50 25134-01-4 N/A Poly(2,6-dimethyl-1,4-phenylene ether), maleated 219136-76-2 N/A Polystyrene, 9003-53-6 High Impact polystyrene 30-40 10 - 20 and/or N/A 9003-55-8 66070-58-4 Styrenic Elastomer 0-3 and/or N/A Confidential Elastomer 0-3 - Confidential N/A 181028-79-5 Aromatic phosphate ester 5-15 or 425-220-8 5945-33-5 65997-17-3 266-046-0 Inorganic filler (Mineral) 15-25 25-35 and/or 1318-59-8 215-285-9 Additives (Stabilizer etc.) <3 - Confidential Registered Petroleum hydrocarbon oil(Mineral oil) <1 <3 Confidential Registered Colorant 0-6 <1 See Appendix | See Appendix Total 100 0-6 - Product Name: X8610, C443V Product Name Contents[wt%] Components X8610 C443V CAS No. EINECS No Poly(2,6-dimethyl-1,4-phenylene ether) 50-60 35-45 25134-01-4 N/A Poly(2,6-dimethyl-1,4-phenylene ether), maleated 219136-76-2 N/A Polystyrene, 9003-53-6 High Impact polystyrene 10-20 5-18 and/or N/A 9003-55-8 66070-58-4 Styrenic Elastomer 0-3 and/or N/A Confidential Elastomer 0-3 Confidential N/A 181028-79-5 Aromatic phosphate ester 10-20 or 425-220-8 5945-33-5 Carbon fiber 5-15 7440-44-0 231-153-3 65997-17-3 266-046-0 Inorganic filler and/or (Glass fiber, Glass flake, Mineral) ° 15-25 14807-96-6 238-877-9 and/or 12001-26-2 N/A Additives (Stabilizer etc. ) <3 Confidential Registered Petroleum hydrocarbon oil(Mineral oil) <1 Confidential Registered Colorant 0-6 See Appendix Total 100 - [Appendix ] Colorant Component Content[wt%] CAS No. PINES Carbon Black 0-3 1333-86-4 215-609-9 Titanium oxide (IV) 0-5 13463-67-7 236-675-5 Iron oxide o-5 1309-37-1 215-168-2 i 12/ 18 Asa ‘al KASEI! Product name XYRON (PS) SDS Ref. No.: XY-W022-2 FirstIlssue Mar. 24, 2014 SAFETY DATA SHEET Revised Issue: May 11, 2018 6. Accidental release measures Personal precautions, pro- Clean up the floor immediately because it may be slippery if pellet or tective equipment and powder remains. emergency procedures Emergency measures and Wear protective equipment (safety glasses, dust mask, and as neces- protective equipment sary, respirator) to avoid contact with dust, inhalation. Environmental precautions Collect all leakage on the water surface such as drain system consid- ering adverse effect to avian species and fish. Methods and materials for Sweep up or clean with vacuum cleaner, collect and dispose of. containment and cleaning up Prevention of secondary None. disaster 7. Handling and storage < Precautions for safe handling > Engineering measures — Wear eye protection, heat-resistant gloves, long-sleeved work clothing for burn prevention when handling melted resin. Avoid breathing gases gener- ated from the melted resin. Local exhaust, total Use effective local exhaust at the generating point of gases because gasses ventilation are generated when handling melted resin using extruder or injection molding machine. Perform total ventilation by ventilation fan at indoor or working area operating above procedure. Cautions to fire This resin in pellet condition is flame-retardant resin component and does not ignite or explode at room temperature. However gases may be generated if fire occurs in neighborhood and firefighting activity may become difficult. Therefore keep working area neat and tidy, do not use fire. Do not use heater with open flame. (Stove, open fire, etc.) Do not carry match, lighter. No smoking. Ground facilities and equipments (extruder, molding machine, air-conveying line, bag filters, etc.) in order to prevent static discharge. Use safe non-sparking tools. Avoid generation or approach of any other ignition sources. Precautions for safe Do not eat or drink when using this product handling If leaked on the floor, remove and keep cleaned up. If leakage is left the floor becomes slippery and may cause a fall. Determine and keep proper working process. Storage Be stored at places where meet appropriate storage conditions as follows. Store at places where are not exposed to direct sunlight. Store to avoid the high temperature and humidity. Store away from sources of ignition. Take measures to prevent static electricity disaster. Packing material ===—- Use packing container materials suitable for storage conditions. 8. Exposure controls/personal protection Facility measures See “7. Handling and storage” for facility measures. AsahiKASEI 13/ 18 Product name XYRON (PS) SDS Ref. No.: XY-W022-2 FirstIlssue Mar. 24, 2014 SAFETY DATA SHEET Revised Issue: May 11, 2018 Administrative level, al- Gases are generated from melted resin but administrative level and al- lowable limit lowable limit are not established. <Dust> Allowable limit for this resin is not established in AGCIH. However below values are applicable for dust. | Airborne Exposure Limit (reference 2, 3) OSHA PEL 3.5 mg/m*(Carbon black) 15mg/m*(Total dust/Titanium oxide(IV)) 15 mg/m* (Total PNOR) 5 mg/m* (Respirable PNOR) *PNOR: Particulates not otherwise regulated ACGIH TLV-TWA 0.025 mg/m? (Respirable fraction/ Quartz) 3 mg/m° (Inhalable fraction/ Carbon black) 10 mg/m? (Titanium oxide (IV)) 5 mg/m* (Respirable fraction/ Iron oxide) 3 mg/m* (Respirable PNOS) 10 mg/m? (Inhalable PNOS) *PNOS: Particles (insoluble or poorly soluble) Not Otherwise Specified Individual protection measures, such as personal protective equipment > Respiratory protection Wear gas mask for organic gas when working in a place where generated gas or fume may be breathed. Wear dust control mask when dust is caused by the works such as machinery processing of resin product, sanding, re- moving rising powder from bag filter, cleaning of sieving machine. Hand protection It is recommended to wear hand protection if necessary. Especially when handling melted resin, wear heat-resistant gloves for burn prevention. Eye protection It is recommended to wear side-shielded eye protection made with resin, resin goggles. Skin and body protection Wear long-sleeved clothing when handling melted resin for burn prevention. . Physical and chemical properties Appearance Plastic solid. Yellow — brown, or colored pellet (physical state, color, etc.) Odor None pH

2.1 Classification of the substance or mixture

[GHS-Classification] Physical Hazards | Classification not possible Health Hazards _ Classification not possible Environmental Hazards Classification not possible Other Hazards Non