Note: Ingredients listed on restricted chemical lists
EC/CAS
215-138-9/1305-78-8
Name of the chemical
Calcium oxide
Concentration
>=1-<3
EC/CAS
202-849-4/100-41-4
Name of the chemical
Ethylbenzene
Concentration
=1-<2,5 >=1-<10
EC/CAS
202-966-0/101-68-8
Name of the chemical
4,4’-Methylenediphenyl diisocyanate
Concentration
>=0,1-<1 >=5% >=5% >=5% >=0,1%
General Information
Version
1.0
Revision date
2026-04-22
Product name
Bond+Seal MARINE grey
1.2.1 Relevant identified uses
Sealant Professional use product
1.2.2. Uses advised against
May only be used by trained personnel on use
Emergency telephone
+372 6511 222, +372 6511 201
Icons in SDS
Company Information
company name
AS Würth
e-mail address of the competent person responsible for the Safety Data Sheet
prodsafe@wuerth.com
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H317, H334
Hazard statements
Code
Statements
H317
May cause an allergic skin reaction
Section 2
SECTION 2: Hazards identification
Regulation (EC) No. 1272/2008 Classification of the substance or mixture
Signal word
Danger
Hazard statements
H317 May cause an allergic skin reaction. H334 May cause allergy or asthma symptoms or breath- ing difficulties if inhaled.
Prevention
P261 Avoid breathing dust/ fume/ gas/ mist/ vapours/ spray. P280 Wear protective gloves. P284 Wear respiratory protection.
Response
P304 + P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing. P333 + P313 If skin irritation or rash occurs: Get medical advice/ attention. P342 + P311 If experiencing respiratory symptoms: Call a POISON CENTER/ doctor.
Hazardous Ingredients
4,4'-Diphenylmethane diisocyanate Reaction mass of bis(1,2,2,6,6-pentamethyl-4-piperidyl) sebacate and Methyl 1,2,2,6,6- pentamethyl-4-piperidyl sebacate
Additional information
EUH205 Contains epoxy constituents. May produce an allergic reaction. "As from 24 August 2023 adequate training is required before industrial or pro- fessional use."
2.3 Other hazards
This substance/mixture contains no components considered to be either persistent, bioaccumula- tive and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.
ECOLOGICAL INFORMATION
The substance/mixture does not contain components considered to have endocrine disrupting properties according to REACH Article 57(f) or Commission Delegated regu- lation (EU) 2017/2100 or Commission Regulation (EU) 2018/605 at levels of 0.1% or higher.
TOXICOLOGICAL INFORMATION
The substance/mixture does not contain components considered to have endocrine disrupting properties according to REACH Article 57(f) or Commission Delegated regulation (EU) 2017/2100 or Commission Regulation (EU) 2018/605 at levels of 0.1% or higher. Excessive exposure may aggravate preexisting asthma and other respiratory disorders (e.g. em- physema, bronchitis, reactive airways dysfunction syndrome).
2.1 Classification of the substance or mixture
Classification (REGULATION (EC) No 1272/2008) Respiratory sensitisation, Category 1 H334: May cause allergy or asthma symptoms or breathing difficulties if inhaled. Skin sensitisation, Category 1 H317: May cause an allergic skin reaction.
