Note: Ingredients listed on restricted chemical lists
General Information
Revision date
2014-09-20
Product name
3D GLUE
Product Synonyms
None
CAS No.
67-64-1
1.2.1 Relevant identified uses
Glue for 3D printing
Emergency telephone
Toxicology Information Centre, Na Bojišti 1, 128 00 Prague 2 (Czech Republic
Icons in SDS
Company Information
company name
Aroja, s.r.o
e-mail address of the competent person responsible for the Safety Data Sheet
martina_sramkova@volny.cz
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H225, H319, H336
Hazard statements
Code
Statements
H225
Highly Flammable liquid and vapour
Section 2
2.1 Classification of the substance or mixture
2.1.1 Classification in accordance with Directive No. 1999/45/EC Highly flammable, F, R11 Irritant, Xi, R36 R67 For the full text of R phrases see Section 16 of this MSDS 2.1.2 Classification in accordance with Regulation (EC) No. 1272/2008 Flam. Liq. 2; H225 Eye Irrit. 2; H319 STOT SE 3; H336 For the full text of H statements and the meaning of hazard class abbreviations according to Regulation (EC) No. 1272/2008 see Section 16 of this MSDS 2.1.3 Major physical and chemical adverse effects Highly flammable 2.1.4 Major adverse effects on human health Volatile vapours of organic solvents are irritating to respiratory organs and mucous membranes. Inhalation of vapours irritates mucous membranes. Causes serious eye irritation. Solvents can be absorbed through skin into the organism. Narcotic effects. Warning Repeated exposure may cause skin dryness or cracking. 2.1.5 Major adverse effects on the environment None
2.2 Label elements
2.2.1 Label elements in accordance with Directive No. 1999/45/EC highly flammable irritant R11 Highly flammable R36 Irritating to eyes R67 Vapours may cause drowsiness and dizziness. R66 Repeated exposure may cause skin dryness or cracking S2 Keep out of the reach of children. S9 Keep container in a well-ventilated place S16 Keep away from sources of ignition - No smoking. S23 Do not breathe vapour S26 In case of contact with eyes, rinse immediately with plenty of water and seek medical advice S33 Take precautionary measures against static discharges S46 If swallowed, seek medical advice immediately and show this container or label 2.2.1.1
Further information
For further information about the product labelling arising from related legislation see Section 15. For instructions about transport labelling in accordance with ADR see Section 14. 2.2.2 Label elements in accordance with Regulation (EC) No. 1272/2008 DANGER
Contains
Acetone H225 Highly flammable liquid and vapour. H319 Causes serious eye irritation. H336 May cause drowsiness or dizziness P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P280 Wear protective gloves and eye protection P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing. P337 + P313 If eye irritation persists: Get medical advice/attention. P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing. P302 + P352 IF ON SKIN: Wash with plenty of water P301 + P310 IF SWALLOWED: Immediately call a POISON CENTER or doctor P271 Use only outdoors or in a well-ventilated area. P102 Keep out of reach of children. P501Dispose of contents/container as hazardous waste EUH066 Repeated exposure may cause skin dryness or cracking. Notes to the listed precautionary statements (P): We find appropriate to indicate more precautionary statements in this Section than shown on the mixture label (as explicitly recommended for some cases by the ECHA document of 04/2011 (Guidance on Labelling and Packaging in accordance with CLP Regulation). For better convenience, statements which appear on the mixture label are in "italics".
2.3 Other hazards
The mixture does not meet criteria for PBT or vPvB substances as specified in Annex XIII. It contains no substances of very high concern (SVHC) according to REACH, Art. 57.