RECOMA STAB

Hazard statements (CLP)

H302, H302+H312+H332, H312, H315, H317, H319, H332, H335, H351

Code

Statements

H302

Harmful if swallowed

SECTION 2: Hazards identification

GHS US classification Under normal conditions of use and handling in the solid form, harmful substances cannot be released. Much of the information provided in this SDS is for situations of use in which hazardous exposures may occur, such as laser cutting or machining.

Classification (GHS-US)

Acute Tox. 4 (Oral) H302 Acute Tox. 4 (Dermal) H312 Acute Tox. 4 (Inhalation:dust,mist) H332 Skin Irrit. 2 H315 Eye Irrit. 2A H319 Skin Sens. 1 H317 Carc. 2 H351 STOT SE 3 H335

Hazard statements

see section 16 : H302+H312+H332 - Harmful if swallowed, in contact with skin or if inhaled. H315 - Causes skin irritation. H317 - May cause an allergic skin reaction. H319 - Causes serious eye irritation. H335 - May cause respiratory irritation. H351 - Suspected of causing cancer.

2.2 Label elements

GHS-US Labeling

Hazard pictograms

GHS07 GHS08

Signal word

Warning

Precautionary statements

P201 - Obtain special instructions before use. P202 - Do not handle until all safety precautions have been read and understood. P261 - Avoid breathing vapors, mist, or spray. P264 - Wash hands, forearms, and other exposed areas thoroughly after handling. P270 - Do not eat, drink or smoke when using this product. P271 - Use only outdoors or in a well-ventilated area. P272 - Contaminated work clothing must not be allowed out of the workplace. P280 - Wear protective gloves, protective clothing, and eye protection. P301+P312 - If swallowed: Call a poison center or doctor if you feel unwell. P302+P352 - If on skin: Wash with plenty of water. P304+P340 - If inhaled: Remove person to fresh air and keep at rest in a position comfortable for breathing. P305+P351+P338 - If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P308+P313 - If exposed or concerned: Get medical advice/attention. P312 - Call a poison center or doctor if you feel unwell. P321 - Specific treatment (see section 4 on this SDS). P330 - Rinse mouth. P333+P313 - If skin irritation or rash occurs: Get medical advice/attention. P337+P313 - If eye irritation persists: Get medical advice/attention. P362+P364 - Take off contaminated clothing and wash it before reuse. P403+P233 - Store in a well-ventilated place. Keep container tightly closed. P405 - Store locked up. P501 - Dispose of contents/container in accordance with local, regional, national, and international regulations.

2.3 Other hazards

Molten material may produce fumes that are toxic, or irritating, and may cause metal fume fever. When machined or physically altered material may produce dusts or ribbons that may be irritating or harmful. Exposure may aggravate pre-existing eye, skin, or respiratory conditions. Chips and broken magnets can be very sharp. Pacemaker function may be affected by magnets. These magnets are powerful and can accelerate at high speeds toward each other. When these magnets come together quickly, they can shatter and break sending particles at speed and can also pinch strongly if allowed to come together against the skin. 2.4.

Ingredient(s) with unknown acute toxicity

No data available