Note: Ingredients listed on restricted chemical lists
EC/CAS
234-625-7/12017-68-4
Name of the chemical
Cobalt, compound with samarium (5:1)
Concentration
<=81
EC/CAS
231-176-9/7440-67-7
Name of the chemical
Zirconium and its compounds, with the exception of the substances listed under reference number 50 in Annex III, and the zirconium lakes, pigments or salts of the colouring agents when listed in Annex IV
Concentration
2-5
EC/CAS
231-159-6/7440-50-8
Name of the chemical
Copper
Concentration
2-5
EC/CAS
231-159-6/7440-02-0
Name of the chemical
Nickel
Concentration
<=0,2
EC/CAS
231-111-4
Name of the chemical
Nickel
Concentration
<=0,2
General Information
Revision date
2016-04-04
Product name
Sm2Co17 StabRECOMA 26, RECOMA 28, RECOMA 30, RECOMA 32, RECOMA 24HE, RECOMA 26HE, RECOMA 28HE, RECOMA 30HE, RECOMA 30S, RECOMA 32S, RECOMA 33E, RECOMA 35E
Manufacturer Name
Arnold Magnetic Technologies AG
Emergency telephone
(+41) (0) 56 464 21 00
Icons in SDS
Company Information
company name
Arnold Magnetic Technologies AG
GHS Information
Signal word
Warning
Hazard Codes
Hazard statements (CLP)
H302, H302+H312+H332, H312, H315, H319, H332, H335
Hazard statements
Code
Statements
H302
Harmful if swallowed
H302+H312+H332
Harmful if swallowed, in contact with skin or if inhaled
H312
Harmful in contact with skin
H315
Causes skin irritation
H319
Causes serious eye irritation
H332
Harmful if inhaled
H335
May cause respiratory irritation
Section 2
SECTION 2: Hazards identification
According to Regulation (EC) No. 1272/2008 (CLP) Under normal conditions of use and handling in the solid form, harmful substances cannot be released. Much of the information provided in this SDS is for situations of use in which hazardous exposures may occur, such as laser cutting or machining.
CLP CLASSIFICATION
Acute Tox. 4 (Oral) H302 Acute Tox. 4 (Dermal) H312 Acute Tox. 4 (Inhalation:dust,mist) H332 Skin Irrit. 2 H315 Eye Irrit. 2 H319 STOT SE 3 H335
Hazard statements
see section 16 : H302+H312+H332 - Harmful if swallowed, in contact with skin or if inhaled H315 - Causes skin irritation H319 - Causes serious eye irritation H335 - May cause respiratory irritation
Adverse physicochemical, human health and environmental effects
No additional information available
2.2 Label elements
Labelling according to Regulation (EC) No. 1272/2008 [CLP]
Hazard pictograms
GHS07
Signal word
Warning
Precautionary statements
P261 - Avoid breathing vapors, mist, or spray. P264 - Wash hands, forearms, and other exposed areas thoroughly after handling. P270 - Do not eat, drink or smoke when using this product. P271 - Use only outdoors or in a well-ventilated area. P280 - Wear protective gloves, protective clothing, and eye protection. P301+P312 - IF SWALLOWED: Call a POISON CENTER or doctor if you feel unwell. P302+P352 - IF ON SKIN: Wash with plenty of water. P304+P340 - IF INHALED: Remove person to fresh air and keep comfortable for breathing. P305+P351+P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P312 - Call a POISON CENTER or doctor if you feel unwell. P321 - Specific treatment (see section 4 on this SDS). P330 - Rinse mouth. P332+P313 - If skin irritation occurs: Get medical advice/attention. P337+P313 - If eye irritation persists: Get medical advice/attention. P362+P364 - Take off contaminated clothing and wash it before reuse. P403+P233 - Store in a well-ventilated place. Keep container tightly closed. P405 - Store locked up. P501 - Dispose of contents/container in accordance with local, regional, national, and international regulations.
Supplemental label elements
EUH208 - Contains Nickel(7440-02-0). May produce an allergic reaction
2.3 Other hazards
Molten material may produce fumes that are toxic, or irritating, and may cause metal fume fever. When machined or physically altered material may produce dusts or ribbons that may be irritating or harmful. Exposure may aggravate pre-existing eye, skin, or respiratory conditions. Chips and broken magnets can be very sharp. Pacemaker function may be affected by magnets. These magnets are powerful and can accelerate at high speeds toward each other. When these magnets come together quickly, they can shatter and break sending particles at speed and can also pinch strongly if allowed to come together against the skin. Accumulation and dispersion of dust with an ignition source can cause a combustible dust explosion. Keep dust levels to a minimum and follow applicable regulations