Armaflex 520

Hazard statements (CLP)

H225, H319, H336, H411

Code

Statements

H225

Highly Flammable liquid and vapour

SECTION 2: Hazards identification

Regulation (EC) No. 1272/2008 Classification of the substance or mixture

Hazard pictograms

GHS02 GHS07 GHS09

Signal word

Danger Hazardous component(s) to be indicated on label Hydrocarbons, C6-C7, isoalkanes, cyclics, <5% n-hexane ethyl-acetate acetone butanone

Hazard statements

H225 Highly flammable liquid and vapour. H319 Causes serious eye irritation. H336 May cause drowsiness or dizziness. H411 Toxic to aquatic life with long lasting effects. EUH066 Repeated exposure may cause skin dryness or cracking. EUH208

Contains

Rosin; colophony. May produce an allergic reaction

Precautionary statements

P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P261 Avoid breathing vapours/spray. P273 Avoid release to the environment. P280 Wear protective gloves/protective clothing/eye protection/face protection. P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P312 Call a POISON CENTER/doctor if you feel unwell. P391 Collect spillage. P403+P235 Store in a well-ventilated place. Keep cool. P501 Dispose of contents/container to a facility in accordance with local and national regulations.

Other hazards

Vapours can form an explosive mixture with air PBT assessment The components of this product are not considered to be a PBT. vPvB assessment The components of this product are not considered to be a vPvB.

2.1 Classification of the substance or mixture

Classification in accordance with Regulation (EC) No 1272/2008 (CLP) Aquatic Chronic 2; H411 Eye Irrit. 2; H319 Flam. Liq. 2; H225 STOT SE 3; H336 Classification information This product is assessed and classified using the methods and criteria below referred to in Article 9 of Regulation (EC) n° 1272/2008: Physical hazards: determined through assessment data based on the methods or standards referred to in part 2 of Annex I to CLP Health hazards and environmental hazards: determined through toxicological and ecotoxicological assessment data based on the methods or standards referred to in Part 3, 4 and 5 of Annex I to CLP.