Note: Ingredients listed on restricted chemical lists
EC/CAS
7732-18-5
Name of the chemical
Water, distilled, conductivity or of similar purity H2O
Concentration
>=60-<=100 >=10-<30%
EC/CAS
111-76-2
Name of the chemical
Ethylene glycol monobutyl ether (EGBE)
Concentration
>=10-<30%
EC/CAS
112-34-5
Name of the chemical
2-(2-butoxyethoxy)ethanol
Concentration
>=5-<10%
EC/CAS
50-00-0
Name of the chemical
Formaldehyde
Concentration
<0.1%
General Information
Version
1.0
Revision date
2021-08-09
Product name
PRIMGREEN(TM) L.A.T. 12035
Product Synonyms
Not available
Chemical name
Epoxy resin solution
Emergency telephone
(800) 424-9300
Icons in SDS
Company Information
company name
Arkema Inc
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H226, H315, H317, H319, H350
Hazard statements
Code
Statements
H226
Flammable liquid and vapour
Section 2
SECTION 2: Hazards identification
Emergency Overview Color: amber Physical state: liquid Odor: Strong solvent odour
2.1 Classification of the substance or mixture
Flammable liquids, Category 3, H226 Skin irritation, Category 2, H315 Eye irritation, Category 2A, H319 Skin sensitisation, Category 1, H317 Carcinogenicity, Category 1A, H350 *For the full text of the H-Statements mentioned in this Section, see Section 16.
Signal word
Danger
Hazard statements
H226 : Flammable liquid and vapour. H315 : Causes skin irritation. H317 : May cause an allergic skin reaction. H319 : Causes serious eye irritation. H350 : May cause cancer.
Supplemental label elements
Processing may release vapors and/or fumes which cause eye, skin and respiratory tract irritation.
Prevention
P201 : Obtain special instructions before use. P202 : Do not handle until all safety precautions have been read and understood. P210 : Keep away from heat, sparks, open flames, hot surfaces. No smoking. P233 : Keep container tightly closed. P240 : Ground/bond container and receiving equipment. P241 : Use explosion-proof electrical/ ventilating/ lighting equipment. P242 : Use only non-sparking tools. P243 : Take precautionary measures against static discharge. P261 : Avoid breathing dust/ fume/ gas/ mist/ vapours/ spray. P264 : Wash skin thoroughly after handling. P272 : Contaminated work clothing should not be allowed out of the workplace. P280 : Wear protective gloves or eye protection or face protection. P281 : Use personal protective equipment as required.
Response
P303+P361+P353 IF ON SKIN (or hair) Remove or take off immediately all contaminated clothing. Rinse skin with water and shower. P305+P351+P338 IF IN EYES Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P308 + P313 IF exposed or concerned Get medical advice/ attention P333 + P313 If skin irritation or rash occurs Get medical advice/ attention P337 + P313 If eye irritation persists Get medical advice/ attention P362 : Take off contaminated clothing and wash before reuse. P370 + P378 In case of fire Use dry sand, dry chemical or alcohol-resistant foam for extinction
Storage
P403 + P235 : Store in a well-ventilated place. Keep cool. P405 : Store locked up.
Disposal
P501 : Dispose of contents or container to an approved waste disposal plant.
Potential health effects
If swallowed, may cause gastrointestinal irritation including nausea and vomiting. Due to the presence of the solvent Prolonged or repeated exposure may cause Prolonged or repeated skin contact may cause defatting resulting in drying, redness and rash. Contains high molecular weight polymer(s). Effects due to processing releases: Irritating to eyes, respiratory system and skin. Prolonged or repeated exposure may cause: headache, drowsiness, nausea, weakness, (severity of effects depends on extent of exposure). Other: Dried product may stick to the skin causing irritation upon removal. This product may release fume and/or vapor of variable composition depending on processing time and temperature.