GF1, GF3, GF5, GF6, GF8, GF9 GTA, GTS, GTM, GH1, GH8, GM2

Aristech Surfaces LLC

Revision date : 2014-01-19

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.
GHS07
Health risk rating 4
Safety risk rating 1
Environmental risk rating 1

Note: Ingredients listed on restricted chemical lists

EC/CAS

21645-51-2

Name of the chemical

Aluminium hydroxide

Concentration

N/A

EC/CAS

80-62-6

Name of the chemical

methacrylic acid, methyl ester

Concentration

N/A

General Information

Revision date

2014-01-19

Product name

GF1, GF3, GF5, GF6, GF8, GF9 GTA, GTS, GTM, GH1, GH8, GM2

Product Synonyms

Polymethylmethacrylate; Acrylic; Mineral Filled Acrylic

Chemical name

Polymethylmethacrylate

1.2.1 Relevant identified uses

Acrylic/Solid Surface

Manufacturer Name

Aristech Surfaces LLC

Emergency telephone

Fax: (859)-283-7378

Icons in SDS

Company Information

company name

Aristech Surfaces LLC

e-mail address of the competent person responsible for the Safety Data Sheet

info@aristechsurfaces.com

GHS Information

Signal word

Warning

Hazard Codes

Hazard statements (CLP)

H315, H317, H319, H335

Hazard statements

Code

Statements

H315

Causes skin irritation

H317

May cause an allergic skin reaction

H319

Causes serious eye irritation

H335

May cause respiratory irritation

Section 2

SECTION 2: Hazards identification

Classification according to Regulation (EC) No 1272/2008[CLP]]

2.1 Classification of the substance or mixture

Information Not Classified INGREDIENT Classification Information: Preliminary Statement: The product in its finished, marketed form is believed to be inert and generally innocuous. These classifications/hazards are pertaining to a compromised/disrupted product due to operations and processing such as sanding, sawing, grinding, burning etc.

CLP CLASSIFICATION

Classification according to Regulation (EC) No 1272/2008[CLP]:]] Eye Irritation - Category 2 Skin Irritation - Category 2 Skin Sensitization – Category 1 Specific Target Organ Toxicity Single Exposure - Category 3 (Respiratory)

Signal word

WARNING!!! IRRITANT

Principle Routes of Exposure

Inhalation, eye and skin CLP/GHS Statements: 

Hazard statements

H315 Causes skin irritation  H317 May cause an allergic skin reaction  H319 Causes serious eye irritation  H335 May cause respiratory irritation 

Prevention

P261 Avoid breathing dust/fume/gas/mist/vapors/spray.  P264 Wash skin thoroughly after handling.  P271 Use only outdoors or in a well-ventilated area.  P272 Contaminated work clothing should not be allowed out of the workplace.  P280 Wear protective gloves/protective clothing/eye protection/face protection.

Response

P302 + P352 IF ON SKIN: Wash with plenty of soap and water.  P303 + P361 + P353 IF ON SKIN (or hair): Remove/Take off Immediately all contaminated clothing. Rinse SKIN with water/shower.  P304 + P340 IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.  P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.  P312 Call a POISON CENTER or doctor/physician if you feel unwell.  P333 + P313 IF SKIN irritation or rash occurs: Get medical advice/attention.  P337 + P313 IF eye irritation persists: Get medical advice/attention  P362 Take off contaminated clothing and wash before reuse.  P370 + P378 In case of fire: Use water or dry chemicals for extinction.

Storage

P403 + P235 Store in a well-ventilated place. Keep cool.  P405 Store locked up.

Disposal

P501 Dispose of in accordance with local, state and federal requirements. This product as sold in its marketed form is not considered an EPA hazardous waste when discarded. Allow hot or heated material to solidify and cool before disposal.

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.