General Information
Revision date
2019-01-27
Product name
ARCOPLAST Finishing Compound A-1010 Bio-Seal White Pt. A
Product name
ARCOPLAST Finishing Compound A-1010 Bio-Seal White Pt. A
Identification on the label/Trade name
ARCOPLAST Finishing Compound A-1010 Bio-Seal White Pt. A, Effective Date
1.2.1 Relevant identified uses
Adhesive, Part 1 of 2
Icons in SDS
Company Information
company name
Arcoplast, Inc
GHS Information
Signal word
WARNING
Hazard Codes
Hazard statements (CLP)
H317, H332, H402, H412
Hazard statements
Code
Statements
H317
May cause an allergic skin reaction
Section 2
SECTION 2: Hazards identification
GHS Classification GHS CLASSIFICATION Acute toxicity Inhalation - VapoursCategory 4 Acute toxicity Inhalation - Dust and Mist Category 4 Skin sensitization Category 1A Hazardous to the aquatic environment - acute hazard Category 3 Hazardous to the aquatic environment - chronic hazard Category 3
Signal word
WARNING
Hazard statements
Harmful if inhaled. May cause an allergic skin reaction. Harmful to aquatic life. Harmful to aquatic life with long lasting effects.
Prevention
Wear protective gloves. Avoid breathing dust/fume/gas/mist/vapors/spray. Use only outdoors or in a well-ventilated area. Contaminated work clothing should not be allowed out of the workplace. Avoid release to the environment.
Response
Call a POISON CENTER or doctor/physician if you feel unwell. Specific treatment (see supplemental first aid instructions on this label). IF INHALED: Remove to fresh air and keep at rest in a position comfortable for breathing. IF ON SKIN: Wash with plenty of soap and water. If skin irritation or rash occurs: Get medical advice/attention. 300001000799 Wash contaminated clothing before reuse.
Storage
Refer to Section 7 of this SDS.
Disposal
Dispose of contents/container in accordance with waste/disposal laws and regulations of your country or particular locality.
2.3 Other hazards
This product contains component(s) which have the following warnings; however based on the GHS classification criteria of your country or locale, the product mixture may be outside the respective category(s). Acute: Causes skin and eye irritation. Causes respiratory tract irritation. Possible irritation of the respiratory system can occur causing a variety of symptoms such as dryness of the throat, tightness of the chest, and shortness of breath. Allergic conditions can occur in certain individuals with high sensitivity to isocyanates; this may result in asthma-like symptoms. May cause lung damage. May cause allergic respiratory reaction. May be harmful if swallowed. Ingestion is not an expected route of entry in industrial or commercial uses. Chronic: Prolonged or repeated contact may result in dermatitis.
2.1 Classification of the substance or mixture
Acute toxicity Inhalation - VapoursCategory 4 Acute toxicity Inhalation - Dust and Mist Category 4 Skin sensitization Category 1A Hazardous to the aquatic environment - acute hazard Category 3 Hazardous to the aquatic environment - chronic hazard Category 3