Arc Polyurethane Wood Adhesive 5min 310ml

Hazard statements (CLP)

H315, H317, H319, H332, H334, H335, H351, H373

Code

Statements

H315

Causes skin irritation

SECTION 2: Hazards identification

Classification (EC 1272/2008) Classification of the substance or mixture Classification (EC 1272/2008)

Physical hazards

Not Classified

Health hazards

Acute Tox. 4 - H332 Skin Irrit. 2 - H315 Eye Irrit. 2 - H319 Resp. Sens. 1 - H334 Skin Sens. 1 H317 Carc. 2 - H351 STOT SE 3 - H335 STOT RE 2 - H373

Environmental hazards

Not Classified Human health Contains non-volatile isocyanate. Heating may generate vapours which irritate the respiratory system. May cause allergy or asthma symptoms or breathing difficulties if inhaled

Signal word

Danger

Hazard statements

H332 Harmful if inhaled. H315 Causes skin irritation. H319 Causes serious eye irritation. H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled. H317 May cause an allergic skin reaction. H351 Suspected of causing cancer. H335 May cause respiratory irritation. H373 May cause damage to organs through prolonged or repeated exposure.

Precautionary statements

EUH204 Contains isocyanates. May produce an allergic reaction. P260 Do not breathe vapour/ spray. P280 Wear protective gloves/ protective clothing/ eye protection/ face protection. P281 Use personal protective equipment as required. P284 [In case of inadequate ventilation] wear respiratory protection. P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P313 Get medical advice/ attention. P501 Dispose of contents/ container in accordance with national regulations. RCH004a Persons already sensitised to diisocyanates may develop allergic reactions when using this product. RCH004b Persons suffering from asthma, eczema or skin problems should avoid contact, including dermal contact, with this product. RCH004c This product should not be used under conditions of poor ventilation unless a protective mask with an appropriate gas filter (i.e. type A1 according to standard EN 14387) is used.

Supplemental label elements

As from 24 August 2023, adequate training is required before industrial or professional use

Contains

DIPHENYLMETHANE-4,4'-DI-ISOCYANATE

2.1 Classification of the substance or mixture

Classification (EC 1272/2008) Physical hazards Not Classified Health hazards Acute Tox. 4 - H332 Skin Irrit. 2 - H315 Eye Irrit. 2 - H319 Resp. Sens. 1 - H334 Skin Sens. 1 - H317 Carc. 2 - H351 STOT SE 3 - H335 STOT RE 2 - H373 Environmental hazards Not Classified Human health Contains non-volatile isocyanate. Heating may generate vapours which irritate the respiratory system. May cause allergy or asthma symptoms or breathing difficulties if inhaled.