Inflaming retarding polyethylene film

SECTION 2: Hazards identification

OSHA According to Regulation 2012 OSHA Hazard Communication Standard; 29 CFR Part 1910.1200

2.1 Classification of the substance or mixture

No need for classification according to GHS criteria for this product.

2.2 Label elements

The product does not require a hazard warning label in accordance with GHS criteria.

2.3 Other hazards

No specific dangers known, if the regulations/notes for storage and handling are considered. 4. FIRST AID MEASURES No hazards which require special first aid measures. Inhalation No information available Skin contact No information available Eye contact No information available Ingestion No information available Most important symptoms/effects, No information available acute and delayed Protection of first-aiders No information available Notes to physician No information available 5. FIGHTING MEASURES Suitable extinguishing media Water spray, foam, dry powder. Burning is accompanied by melting and dripping which may cause the Specific hazards fire to spread. Hazardous combustion products Carbon monoxide Carbon dioxide (CO2) Special protective equipment for Wear self-contained breathing apparatus and protective suit. firefighters Specific extinguishing No information available. methods

Further information

Use extinguishing measures that are appropriate to local circumstances and the surrounding environment. 6. ACCIDENTAL RELEASE MEASURES Protective measures,devices and emergency treatment procedure for No information available workers Environmental precautions No information available Methods and materials for containment and Not applicable cleaning up Prevention of secondary hazards No information available 7. HANDING AND STORAGE Technical Material can create slippery conditions. Take precautionary measures/Precautions measures against static discharges. Avoid dust formation. Precautions for safe No information available. handling Suitable storage No special storage conditions required. conditions 8. EXPOSURE CONTROLS / PERSONAL PROTECTION Personal protective equipment Respiratory protection should not be required for normal use and handling. Respiratory protection When workers are facing concentrations above the exposure limit they must use appropriate certified respirators PEL (OSHA) 5 8 hr. Respirable mg/m3 TWA fraction. PEL (OSHA) 15 8 hr. Total dust. mg/m3 TWA TLV (ACGIH) 3 8 hr. Respirable mg/m3 TWA particles TLV (ACGIH) 10 8 hr. Inhalable Exposure Guidelines mg/m3 TWA particles. Exposure Limit Values Polyethylene PEL (OSHA) 15 mg/m3 Total dust TLV (ACGIH) 10 mg/m3 Total dust PEL (OSHA) 5 mg/m3 Respirable Dust. TLV (ACGIH) 3 mg/m3 Respirable Dust. 1,1'-(ethane-1,2-diyl)bis[pentabromobenzene] Engineering controls No information available. Biological occupational No information available. exposure limits Personal protective equipment Respiratory protection should not be required for normal use and Respiratory protection handling. When workers are facing concentrations above the exposure limit they must use appropriate certified respirators. Hand protection No information available. Eye protection No information available. Skin protection No information available. Hygiene measures No information available. 9. PHYSICAL AND CHEMICAL PROPERTIED Physical state solid Color white Odor none Form sheets Melting point Not available. Ph Not available. Boiling point Not available. Flash point Not available Evaporation rate Not available Solubility in other solvents Solubility Boiling Point Not available Flammability (solid, gas) Not available Upper explosion limit Not available Lower explosion limit Not available Vapour pressure not applicable Vapour density Not available Density 0.90-0.96g/cm3. Partition coefficient: noctanol/water Not available Auto-ignition Not available temperature Decomposition Not available temperature Viscosity, kinematic Not available Molecular weight Not available