Apex Fly Ash

SECTION 2: Hazards identification

GHS Classification Purpose: Section 2 describes the hazard(s) associated with the product and the appropriate warning information

2.2 Label elements

This data on the inherent hazards of the product per 29CFR 1910.1200 and the GHS Guideline, Revision 3. Arrange this section with following subheadings:  Recommended/required text The appropriate hazard pictograms, signal word, hazard statements, and precautionary statements should be provided as specified in 29CFR 1910.1200(f) and defined in29 CFR 1910.1200, Appendix C and the GHS Guideline, Appendix 1  Include information appropriate to your CCP, based on its composition. The information to be provided for CCP 1 is presented here. Appendix D provides the hazard pictograms, signal word, hazard statements, and precautionary statements associated with each identified CCP. The information within each table can be transposed into the SDS. The footnote to the table provided herein is also recommended to detail the nature of the CCP. Labelling according to 29 CFR 1910.1200 Appendices A,B and C

2.3 Other hazards

2.1.

2.1 Classification of the substance or mixture

Purpose: Section 2.1 lists the product classification per 29CFR 1910.1200 and the GHS Guideline, Revision 3.  Recommended/required text/information Include the appropriate GHS hazard class & category for each health and physical hazard using available data on the finished product or its components, following specifications of Appendices A & B of the HCS Standard and the GHS Guideline, Revision 3. 29  GHS Classification(s) for this product according to OSHA Hazard Communication Standard (29 CFR 1910.1200) include: ‐ STOT‐SE Category 3 (Respiratory Irritation) ‐ STOT‐RE Category 2 Note: The level of respiratory crystalline silica (RCS) present in this product has not been determined; however, a conservative classification for STOT‐RE, Category 2 has been assigned. Note: These GHS Classifications are those associated with CCP 1. Insert the classification applicable to the CCP being evaluated as provided in Table 7 from Section 5.4. 2.2

Signal word

Danger

Hazard statements

May cause respiratory irritation. May cause damage to lungs after repeated/prolonged exposure via inhalation. Do not breathe dust. Use outdoors or in a well ventilated area.

Precautionary statements

If inhaled: Remove to fresh air and keep comfortable for breathing. Get medical advice/attention if you feel unwell. Store in a secure area. Dispose of product in accordance with local/national regulations. * Fly ash and other CCPs are UVCB substances (substance of unknown or variable composition or biological). Fly ash is defined by the US EPA as: “The residuum from the burning of a combination of carbonaceous materials. The following elements may be present as oxides: aluminum, calcium, iron, magnesium, nickel, phosphorus, potassium, silicon, sulfur, titanium, and vanadium.” The exact composition of the fly ash is dependent on the fuel source and flue 30 additives composed of a large number of constituents. The classification of the final substance is dependent on the presence of specific identified oxides as well as other trace elements. 2.3

Other hazards

Recommended/required text Specify the presence of OSHA, IARC, NTP or ACGIH Carcinogens that may be present in the product. The information noted here below is recommended for inclusion if the level of respirable crystalline silica in the final product is above 0.1% or has not been determined.  Listed Carcinogens: o Respirable Crystalline Silica IARC yes NTP yes OSHA no Other (specify, i.e., European Union) no