Note: Ingredients listed on restricted chemical lists
EC/CAS
1310-73-2
Name of the chemical
sodium hydroxide
Concentration
7%
EC/CAS
110-91-8
Name of the chemical
Morpholine
Concentration
<5% 1.5%
General Information
Revision date
2025-08-01
Product name
BA1-SAK-C
1.2.2. Uses advised against
Processes involving extreme heat use advised against Any use carrying a risk of direct contact with eyes/skin where workers are exposed without adequate personal
Emergency telephone
800-535-5053, 1-800-222-1222
Icons in SDS
Company Information
company name
AP Tech
e-mail address of the competent person responsible for the Safety Data Sheet
info@aptechsolids.com
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H290, H314, H318, H361
Hazard statements
Code
Statements
H290
May be corrosive to metals
Section 2
SECTION 2: Hazards identification
NFPA Rating Classification of the substance or mixture Corrosive to metals 1 H290 May be corrosive to metals Skin corrosion 1C H314 Causes severe skin burns and eye damage Eye damage 1 H318 Causes serious eye damage Reproductive toxicity 2 H361 Suspected of damaging fertility or the unborn child Additional information: The classification of Skin corrosion 1C is based on test data for a similar product
2.2 Label elements
The product is classified and labeled according to the Globally Harmonized System (GHS).
Hazard pictograms
GHS05 GHS08
Signal word
Danger
Hazardous Ingredients
Morpholine Tetrasodium ethylenediaminetetraacetate Sodium hydroxide
Hazard statements
May be corrosive to metals. Causes severe skin burns and eye damage. Suspected of damaging fertility or the unborn child.
Precautionary statements
Obtain special instructions before use. Keep only in original packaging. Do not breathe dusts or mists. Wash thoroughly after handling. (Contd. on page 2) US (Contd. of page 1) Wear protective gloves/protective clothing/eye protection/face protection. If swallowed: Rinse mouth. Do NOT induce vomiting. If on skin (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower]. If inhaled: Remove person to fresh air and keep comfortable for breathing. If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a poison center/doctor. IF exposed or concerned: Get medical advice/attention. Wash contaminated clothing before reuse. Absorb spillage to prevent material damage. Store locked up. Store in a corrosion resistant container / container with a resistant inner liner. Dispose of contents/container in accordance with local regulations.
Classification system
· NFPA ratings (scale 0 - 4) Health = 3 0 Fire = 0 3 0 Reactivity = 0 · HMIS-ratings (scale 0 - 4) HEALTH *3 Health = *3 FIRE 0 Fire = 0 REACTIVITY 0 Reactivity = 0
PBT Substances
Not applicable
vPvB Substances
Not applicable
2.1 Classification of the substance or mixture
Corrosive to metals 1 H290 May be corrosive to metals. Skin corrosion 1C H314 Causes severe skin burns and eye damage. Eye damage 1 H318 Causes serious eye damage. Reproductive toxicity 2 H361 Suspected of damaging fertility or the unborn child. · Additional information: The classification of Skin corrosion 1C is based on test data for a similar product.
