Note: Ingredients listed on restricted chemical lists
EC/CAS
14807-96-6
Name of the chemical
Talc
Concentration
20-50
EC/CAS
1675-54-3
Name of the chemical
2,2'-[(1-methylethylidene)bis(4,1-phenyleneoxymethylene)]bisoxirane
Concentration
5-10
EC/CAS
90-72-2
Name of the chemical
2,4,6-tris(dimethylaminomethyl)phenol
Concentration
.10-3
EC/CAS
14808-60-7
Name of the chemical
Silica, crystalline
Concentration
<1
General Information
Revision date
2023-04-25
Product name
READY-STICK TM EPOXY PUTTY With COPPER
1.2.1 Relevant identified uses
Epoxy repair stick
Emergency telephone
1-800-535-5053, 1-352-323-3500
Icons in SDS
Company Information
company name
Anti-Seize Technology
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H335, H350
Hazard statements
Code
Statements
H335
May cause respiratory irritation
Section 2
SECTION 2: Hazards identification
This material is considered hazardous by the OSHA Hazard Communication Standard ( 29 CFR 1910. 1200 ) GHS Classification ( Hazcom 2012)
Signal word
Danger
Hazard statements
Causes skin irritation Cause serious eye irritation May cause an allergic skin reaction 1 Harmful if inhaled. May cause respiratory irritation. May cause cancer.
Precautionary statements
Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Wear protective gloves, protective clothing and eye or face protection. Use only outdoors or in well ventilated area. Avoid breathing dust. Wash Thoroughly after handling. Contaminated work clothing must not be allowed out of workplace.
Response
IF exposed or concerned: Get medical advice or attention. IF INHALED: Remove person to fresh air and keep comfortable for breathing> Call a POISON CENTER or doctor if you feel unwell. Take off contaminated clothing and wash it before reuse. IF ON SKIN Wash with plenty of water. If skin irritation or rash occurs Get medical advice or attention IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice or attention.
Storage
Store locked up. Store in well-ventilated place. Keep container tightly closed.
Disposal
Dispose of contents and container in accordance with all local, regional, national and international regulations.
Other hazards
Percentage of the mixture consisting of ingredients of unknown acute toxicity 33.2% (oral), 78% ( dermal), 85% (inhalation). Sanding and grinding dusts may be harmful if inhaled. This product contains crystalline silica which can cause lung cancer or silicosis. The risk of cancer depends on the duration and level of exposure to dust from sanding surfaces or mist from spray applications. Emits toxic fumes when heated.
2.1 Classification of the substance or mixture
This material is considered hazardous by the OSHA Hazard Communication Standard ( 29 CFR 1910.1200) Acute Toxicity (inhalation)-Category 4 Skin Irritation-Category 2 Eye Irritation- Category 2A Skin Sensitization-Category 1 Carcinogenicity-Category 1A Specific Target Organs Toxicity ( single exposure) (respiratory tract irritation) Category 3 Percentage of the mixture consisting of ingredient(s) of unknown acute toxicity: 33.2% (oral), 78% (dermal), 85.1% (inhalation)
