AST-XPAND EXPANDING FOAM SEALANT

Anti-Seize Technology

Revision date : 2021-07-27

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.
GHS04 GHS08 GHS07
Health risk rating 2
Safety risk rating 1
Environmental risk rating 1

Note: Ingredients listed on restricted chemical lists

EC/CAS

101-68-8

Name of the chemical

4,4’-Methylenediphenyl diisocyanate

Concentration

60-100 5-10

EC/CAS

9016-87-9

Name of the chemical

4,4'-Methylendiphenyldiisocyanat tech. (Polymeres) MDI, pMDI (in Form atembarer Aerosole, A-Fraktion)

Concentration

5-10

EC/CAS

75-28-5

Name of the chemical

iso-Butan, enthält  0,1% Butadien

Concentration

3-7

General Information

Revision date

2021-07-27

Product name

AST-XPAND EXPANDING FOAM SEALANT

1.2.1 Relevant identified uses

Foam insulator and sealant

1.2.2. Uses advised against

None presently known

Emergency telephone

1-800-535-5053, 1-352-323-3500

Icons in SDS

GHS04 GHS07 GHS08

Company Information

company name

Anti-Seize Technology

GHS Information

Signal word

Danger

Section 2

SECTION 2: Hazards identification

GHS Classification GHS Classification ( Hazcom 2012) Flammable Aerosol-Category 1 Gases under pressure-compressed gas Acute Toxicity (inhalation), Category4-Inhalation Skin irritation-Category 2 Serious eye irritation- Category 2A Sensitization, respiratory -Category 1 Sensitization, skin -Category 1 Specific target organ toxicity, single exposure- Category 3, Specific target organ toxicity, repeated exposure- Category 2-inhalation

Signal word

Danger 1

Hazard statements

Aerosol can content under pressure and extremely flammable Do not heat above 120°F (49°C), puncture or incinerate May cause skin and serious eye irritation on direct contact May cause irritation of mucous membranes in the mouth and digestive tract if swallowed. May irritate mucous membranes with tightness in chest, coughing or allergic asthma-like sensitivity if inhaled. .

Prevention

Obtain special instructions before use. Do not puncture or incinerate container Do not tamper with valve. Do not expose to heat or store at temperatures above 120°F (49°C) Use with adequate ventilation. Open doors and windows or use other means to ensure fresh air supply during use and while product is drying. Do not breath gas/mist/vapors. Wash hands thoroughly after handling. Do not eat, drink or smoke when using this product. In case of inadequate ventilation wear respiratory protection.

Response

IF IN EYES: Remove contact lenses if worn. Rinse with water for at least 15 minutes. If eye irritation persists seek medical attention. IF ON SKIN: Wash with plenty of soap and water. If skin irritation persists or if rash occurs seek medical attention. Remove contaminated clothing. IF INHALED: If breathing becomes labored, remove to fresh air. Keep person in a comfortable position for breathing. If breathing remains abnormal seek medical attention.

Storage

Keep away from children Protect from sunlight. Store in well ventilated place. Exposure to high temperatures may cause can to burst Store locked up.

Disposal

Dispose of contents in accordance with local, regional and national regulations

2.3 Other hazards

None presently known

2.1 Classification of the substance or mixture

Flammable Aerosol-Category 1 Gases under pressure-compressed gas Acute Toxicity (inhalation), Category4-Inhalation Skin irritation-Category 2 Serious eye irritation- Category 2A Sensitization, respiratory -Category 1 Sensitization, skin -Category 1 Specific target organ toxicity, single exposure- Category 3, Specific target organ toxicity, repeated exposure- Category 2-inhalation

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.