Note: Ingredients listed on restricted chemical lists
EC/CAS
231-765-0/7722-84-1
Name of the chemical
Hydrogen peroxide
Concentration
20-30%
EC/CAS
200-580-7/64-19-7
Name of the chemical
acetic acid
Concentration
3-8%
General Information
Revision date
2011-05-13
Product name
Hyperox
1.2.1 Relevant identified uses
Disinfectant
Emergency telephone
+44-(0)8456-006.640
Icons in SDS
Company Information
company name
Antec International Limited
e-mail address of the competent person responsible for the Safety Data Sheet
sds-support@che.dupont.com
Section 2
2.1 Classification of the substance or mixture
Oxidising R 8: Contact with combustible material may cause fire. Corrosive R34: Causes burns. Harmful R20/21/22: Harmful by inhalation, in contact with skin and if swallowed.
2.2 Label elements
Corrosive Oxidising R 8 Contact with combustible material may cause fire. R20/21/22 Also harmful by inhalation, in contact with skin and if swallowed. R34 Causes burns. Special labelling of certain Spray application: Do not breathe vapours or spray mist. Use only substances and mixtures in well-ventilated areas. Do not spray on a naked flame or any other incandescent material. Use an airless flow type spray applicator. Keep spraying pressure below 4.1 bar (410 kPa). Before use, read DuPont's safety information. S 3/7 Keep container tightly closed in a cool place. S14 Keep away from contaminants, decomposition catalysts, alkalis, reductants and flammable substances S26 In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S28 After contact with skin, wash immediately with plenty of water. S35 This material and its container must be disposed of in a safe way. S36/37/39 Wear suitable protective clothing, gloves and eye/face protection. S45 In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible).
2.3 Other hazards
Inhalation of aerosol or fine spray mist may cause serious respiratory problems.
