"ANSULEX Low pH" - Liquid Fire Suppressant

SECTION 2: Hazards identification

Directive 1999/45/EC: Ingredient Name Chemical Formula CAS No Proprietary mixture of organic and inorganic salts and water. Not otherwise specified. N/A – This is a mixture/preparation. EINECS Number: Concentration, Wt % N/A – This is a mixture/preparation. About 99 %. Ingredient Name Chemical Formula CAS No See Heading 3. Polypeptide. Not available. EINECS Number: Concentration, Wt % (a). 1.4 %. Ingredient Name Molecular Formula CAS No See Heading 3. Potassium Nitrite. KNO2. 7758-09-0. EINECS Number: Concentration, Wt % 231-832-4. 0.05 %. Ingredient Name Molecular Formula CAS No See Heading 3. Yellow-Green Fluorescent Dye; Fluorescein Sodium Salt; Acid Yellow 73; Uranine. C20 H10Na2O5. 518-47-8. EINECS Number: Concentration, Wt % 208-255-0. 0.011 %. See Heading 3. (a) EINICS does not include synthetic polymers (These are registered in EINICS under their building blocks, monomers.) See: 67/548/EEC, article 13; 79/831/EC; and 81/437/EC. 2.2 (i) There are NO substances presenting a health or environmental hazard within the meaning of Directive 67/548/EEC, in concentrations equal to or greater than those laid down in the table set out in Article 3(3) of Directive 1999/45/EC, nor with lower limits given in Annex I to Directive 67/548/EEC or in Annexes II, III or V to Directive 1999/45/EC. (ii) There are NO substances for which there are Community workplace exposure limits, which are not already included in (i) above. NOTE: Unless a component presents a severe hazard, it does not need to be considered in the MSDS if the concentra- tion is less than 1%. [According to Directive 1999/45/EC].