Note: Ingredients listed on restricted chemical lists
EC/CAS
231-639-5/7664-93-9
Name of the chemical
sulphuric acid
Concentration
<2 ≤0.5
EC/CAS
220-239-6/55965-84-9
Name of the chemical
Mixture of 5-chloro-2-methyl-2H- isothiazol-3-one (EINECS 247-500-7) and 2-methyl-2H-isothiazol-3-one (EINECS 220-239-6)
Concentration
<0.1 28-32 28-32
EC/CAS
247-852-1/26628-22-8
Name of the chemical
Sodium Azide
Concentration
22-8 852-1 004-00-
EC/CAS
247-500-7
Name of the chemical
Mixture of 5-Chloro-2-methyl-isothiazol-3(2H)-one and 2-methylisothiazol-3(2H)-one
Concentration
34-43
General Information
Version
03
Revision date
2022-01-21
Product name
PLGF ELISA
1.2.1 Relevant identified uses
Invitro Diagnostic Use Only
1.2.2. Uses advised against
For quantitative measurement of PLGF in serum
Manufacturer Name
Ansh Labs
Icons in SDS
Company Information
company name
Ansh Labs
e-mail address of the competent person responsible for the Safety Data Sheet
techsupport@anshlabs.com
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H314, H317
Hazard statements
Code
Statements
H314
Causes severe skin burns and eye damage
Section 2
SECTION 2: Hazards identification
Classification of the substance or mixture None of the material of this product may be classified as dangerous according to REACH regulations and EC Directives 1272/2008/EC due to the low concentration of hazardous ingredients
2.2 Label elements
Pro-clean 400: H317 May cause an allergic skin reaction P261 Avoid breathing vapors P272 Contaminated work clothing should not be allowed out of the workplace P280 Wear protective gloves, protective clothing, and eye/face protection P302+P352 If on skin: Wash with plenty of soap and water P333+P313 If skin irritation or rash occurs, seek medical assistance Sulfuric acid: H314 Causes severe skin burns and eye damage. P280 Wear protective gloves, protective clothing, and eye/ face protection. P301+P330+P331 If swallowed: rinse mouth. P303+P361+P353 If on skin (or hair): Rinse skin with water. P305+P351+P338 If in eyes: Rinse cautiously with water for several minutes. Continue rinsing. P310 Immediately seek physician assistance.
2.3 Other hazards
Not applicable. Note: this product is intended for laboratory use by professional uses only. Use appropriate personal protective equipment while working with the reagents provided. BSA has been derived from US origin and processed in USDA licensed facilities, and are free from known infections, however, it should be considered that no available test method can offer complete assurance of eliminating potential biohazardous risk. The antibodies are from monoclonal origin and are free from human or animal source.
2.1 Classification of the substance or mixture
None of the material of this product may be classified as or mixture: dangerous according to REACH regulations and EC Directives 1272/2008/EC due to the low concentration of hazardous ingredients.
