Activin B

Ansh Labs

Revision date : 2026-03-16

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.
GHS05 GHS08 GHS07
Health risk rating 4
Safety risk rating 1
Environmental risk rating 1

Note: Ingredients listed on restricted chemical lists

EC/CAS

231-639-5/7664-93-9

Name of the chemical

sulphuric acid

Concentration

<2 ≤0.5

EC/CAS

220-239-6](3:1/55965-84-9

Name of the chemical

Mixture of 5-chloro-2-methyl-2H- isothiazol-3-one (EINECS 247-500-7) and 2-methyl-2H-isothiazol-3-one (EINECS 220-239-6)

Concentration

<0.1 28-32 28-32

EC/CAS

247-852-1/26628-22-8

Name of the chemical

Sodium Azide

Concentration

28-32

EC/CAS

247-500-7

Name of the chemical

Mixture of 5-Chloro-2-methyl-isothiazol-3(2H)-one and 2-methylisothiazol-3(2H)-one

Concentration

34-43

EC/CAS

220-239-6

Name of the chemical

Mixture of 5-Chloro-2-methyl-isothiazol-3(2H)-one and 2-methylisothiazol-3(2H)-one 2-Methyl-2H-isothiazol-3-one

Concentration

<0.1 28-32 28-32

General Information

Version

05

Revision date

2026-03-16

Product name

Activin B

1.2.1 Relevant identified uses

For the quantitative measurement of Activin B. For **Research use only. For in vitro professional laboratory use **

1.2.2. Uses advised against

Not for use in diagnostic procedures or therapeutic

Manufacturer Name

Ansh Labs

Emergency telephone

1-800-222-1222

Icons in SDS

GHS05 GHS07 GHS08 M004 M009 M010 M011 M017 M059

Company Information

company name

Ansh Labs

e-mail address of the competent person responsible for the Safety Data Sheet

techsupport@anshlabs.com

GHS Information

Signal word

Danger

Hazard Codes

Hazard statements (CLP)

H314, H317

Hazard statements

Code

Statements

H314

Causes severe skin burns and eye damage

Section 2

SECTION 2: Hazards identification

Classification under CLP Classification of the substance

2.2 Label elements

Sulfuric acid: DANGER H314 Causes severe skin burns and eye damage. P280 Wear protective gloves, protective clothing and eye/ face protection. P301+P330+P331 If swallowed: rinse mouth. P303+P361+P353 If on skin (or hair) Rinse skin with water P305+P351+P338 If in eyes: Rinse cautiously with water for several minutes. Continue rinsing. P310 Immediately seek physician assistance. Pro-clean 400/Proclin 300: R23/24/25: Harmful if inhaled, in contact with skin and if swallowed H317 May cause an allergic skin reaction P261 Avoid breathing vapors P272 Contaminated work clothing should not be allowed out of the workplace P280 Wear protective gloves, protective clothing and eye/face protection P302+P352 If on skin: Wash with plenty of soap and water P333+P313 If skin irritation or rash occurs, seek medical assistance.

2.3 Other hazards

• PBT / vPvB assessment: The mixture does not contain any substances identified as PBT or vPvB according to Annex XIII of REACH. • Endocrine-disrupting properties: None of the components are identified as having endocrine-disrupting properties under REACH or CLP. • Biological origin: Some kit components may contain materials of human origin (e.g., serum-based buffers). These are tested and found non-reactive for known pathogens but should be handled using Biosafety Level 2 precautions per CDC/NIH Biosafety in Microbiological and Biomedical Laboratories, 5th Edition. The product also contains proteins of bovine or equine origin sourced from OIE-classified negligible BSE-risk herds in accordance with Reg. (EC) No 999/2001 and Commission Decision 2007/453/EC. Contains trace concentrations of isothiazolinones (< 0.25 %) and sodium azide (< 0.1 %) which are below classification thresholds but may cause sensitization in susceptible individuals. Under normal conditions of use, the mixture does not present any additional physical, health, or environmental hazards.

2.1 Classification of the substance or mixture

According to Regulation (EC) No 1272/2008 (CLP) as or mixture: amended: This mixture is not classified as hazardous under the criteria of Regulation (EC) No 1272/2008 (CLP). It contains trace concentrations of preservatives (isothiazolinones ≤ 0.25%, sodium azide ≤ 0.1%) and dilute sulfuric acid (< 2%), all present below the concentration limits for classification. The mixture does not meet the criteria for physical, health, or environmental hazard classification under CLP. Intended use: For research use only (RUO); not for diagnostic or therapeutic applications.

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.