Anglo Adhesives & Services Limited - Fixative Spray Aerosols

Anglo Adhesives & Services Ltd

Revision date : 2014-11-28

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.
GHS02 GHS04 GHS07
Health risk rating 4
Safety risk rating 4
Environmental risk rating 1

General Information

Revision date

2014-11-28

Product name

Anglo Adhesives & Services Limited - Fixative Spray Aerosols

supplier name

Anglo Adhesives & Services Ltd

Emergency telephone

44 (0) 1664 480866 (MON TO FRI 08 30 - 17 00

Icons in SDS

GHS02 GHS07 T017

Company Information

company name

Anglo Adhesives & Services Ltd

GHS Information

Signal word

Danger

Hazard Codes

Hazard statements (CLP)

H220, H222, H225, H226, H229, H280, H315, H317, H319, H335, H336

Hazard statements

Code

Statements

H220

Extremely flammable gas

H222

Extremely flammable aerosol

H225

Highly flammable liquid and vapour

H226

Flammable liquid and vapour

H229

Pressurized container: may burst if heated

H280

Contains gas under pressure; may explode if heated

H315

Causes skin irritation

H317

May cause an allergic skin reaction

H319

Causes serious eye irritation

H335

May cause respiratory irritation

H336

May cause drowsiness or dizziness

Section 2

Physical hazards

Aerosol 1 - H222, H229

Health hazards

Eye Irrit. 2 - H319 STOT SE 3 - H336

Environmental hazards

Not Classified

67/548/EEC

or 1999/45/EC) F+; R12. Xi; R36. R66, R67 Human health Vapours and spray/mists in high concentrations are narcotic. Environmental The product is not expected to be hazardous to the environment. Physicochemical Containers can burst violently or explode when heated, due to excessive pressure build-up. The product is extremely flammable. Vapours may form explosive mixtures with air.

Hazard pictograms

Anglo Adhesives & Services Limited - Fixative Spray Aerosols

Signal word

Danger

Hazard statements

H222 Extremely flammable aerosol. H229 Pressurised container: may burst if heated H319 Causes serious eye irritation. H336 May cause drowsiness or dizziness.

Precautionary statements

P102 Keep out of reach of children. P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P211 Do not spray on an open flame or other ignition source. P251 Do not pierce or burn, even after use. P261 Avoid breathing vapour/spray. P271 Use only outdoors or in a well-ventilated area. P280 Wear protective gloves/protective clothing/eye protection/face protection. P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing. P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P312 Call a POISON CENTER/doctor if you feel unwell. P410+P412 Protect from sunlight. Do not expose to temperatures exceeding 50°C/122°F.

Supplemental label elements

EUH066 Repeated exposure may cause skin dryness or cracking. information P264 Wash contaminated skin thoroughly after handling. P337+P313 If eye irritation persists: Get medical advice/attention. P403+P233 Store in a well-ventilated place. Keep container tightly closed. P405 Store locked up. P501 Dispose of contents/container in accordance with national regulations.

Contains

ACETONE, PROPAN-2-OL

2.3 Other hazards

This product does not contain any substances classified as PBT or vPvB. 3.2. Mixtures Anglo Adhesives & Services Limited - Fixative Spray Aerosols PETROLEUM GASES, LIQUEFIED 30-60% CAS number 68476-85-7 EC number 270-704-2

2.1 Classification of the substance or mixture

67/548/EEC or 1999/45/EC) Flam. Gas 1 - H220 Press. Gas, Compressed - H280 PROPAN-2-OL 10-30% CAS number 67-63-0 EC number 200-661-7 REACH registration number 01-2119457558-25-XXXX (67/548/EEC or 1999/45/EC) Flam. Liq. 2 - H225 Eye Irrit. 2 - H319 STOT SE 3 - H336 2-METHOXY-1-METHYLETHYL ACETATE 5-10% CAS number 108-65-6 EC number 203-603-9 REACH registration number 01-2119475791-29-XXXX (67/548/EEC or 1999/45/EC) Flam. Liq. 3 - H226 methyl methacrylate <1% CAS number 80-62-6 EC number 201-297-1 (67/548/EEC or 1999/45/EC) Flam. Liq. 2 - H225 STOT SE 3 - H335 Skin Irrit. 2 - H315 Skin Sens. 1 - H317 n-butyl methacrylate <1% CAS number 97-88-1 EC number 202-615-1 (67/548/EEC or 1999/45/EC) Flam. Liq. 3 - H226 Eye Irrit. 2 - H319 STOT SE 3 - H335 Skin Irrit. 2 - H315 Skin Sens. 1 - H317 The Full Text for all R-Phrases and Hazard Statements are Displayed in Section 16. 4.1. Description of first aid measures General information Move affected person to fresh air and keep warm and at rest in a position comfortable for breathing. Get medical attention if any discomfort continues. Inhalation Anglo Adhesives & Services Limited - Fixative Spray Aerosols Rinse mouth thoroughly with water. Remove person to fresh air and keep comfortable for breathing. Get medical attention. Skin contact Wash skin thoroughly with soap and water. Get medical attention promptly if symptoms occur after washing. Eye contact Remove any contact lenses and open eyelids wide apart. Rinse immediately with plenty of water. Continue to rinse for at least 15 minutes. Get medical attention promptly if symptoms occur after washing. Protection of first aiders First aid personnel should wear appropriate protective equipment during any rescue. 4.2. Most important symptoms and effects, both acute and delayed General information See Section 11 for additional information on health hazards. 4.3. Indication of any immediate medical attention and special treatment needed Notes for the doctor Treat symptomatically. 5.1. Extinguishing media Suitable extinguishing media Foam, carbon dioxide or dry powder. 5.2. Special hazards arising from the substance or mixture Specific hazards Containers can burst violently or explode when heated, due to excessive pressure build-up. 5.3. Advice for firefighters Protective actions during firefighting Use water to keep fire exposed containers cool and disperse vapours. Cool containers exposed to heat with water spray and remove them from the fire area if it can be done without risk. 6.1. Personal precautions, protective equipment and emergency procedures Personal precautions Avoid inhalation of vapours and contact with skin and eyes. Ensure suitable respiratory protection is worn during removal of spillages in confined areas. 6.2. Environmental precautions Environmental precautions Avoid discharge into drains. 6.3. Methods and material for containment and cleaning up Methods for cleaning up Eliminate all sources of ignition. No smoking, sparks, flames or other sources of ignition near spillage. Provide adequate ventilation. Absorb in vermiculite, dry sand or earth and place into containers. 6.4. Reference to other sections Reference to other sections For personal protection, see Section 8. See Section 11 for additional information on health hazards. See Section 12 for additional information on ecological hazards. For waste disposal, see Section 13. 7.1. Precautions for safe handling Usage precautions Keep away from heat, sparks and open flame. Read and follow manufacturer's recommendations. When sprayed on a naked Anglo Adhesives & Services Limited - Fixative Spray Aerosols flame or any incandescent material the aerosol vapours can be ignited. Use suitable respiratory protection if ventilation is inadequate. Advice on general occupational hygiene Wash promptly with soap and water if skin becomes contaminated. 7.2. Conditions for safe storage, including any incompatibilities Storage precautions Do not store near heat sources or expose to high temperatures. Keep away from heat, sparks and open flame. 7.3. Specific end use(s) Specific end use(s) The identified uses for this product are detailed in Section 1.2. 8.1. Control parameters Occupational exposure limits ACETONE Long-term exposure limit (8-hour TWA): WEL 500 ppm 1210 mg/m3 Short-term exposure limit (15-minute): WEL 1500 ppm 3620 mg/m3 PETROLEUM GASES, LIQUEFIED Long-term exposure limit (8-hour TWA): WEL 1000 ppm 1750 mg/m3 Short-term exposure limit (15-minute): WEL 1250 ppm 2180 mg/m3 PROPAN-2-OL Long-term exposure limit (8-hour TWA): WEL 400 ppm 999 mg/m3 Short-term exposure limit (15-minute): WEL 500 ppm 1250 mg/m3 2- METHOXY-1-METHYLETHYL ACETATE Short-term exposure limit (15-minute): WEL 548 mg/m3 100 ppm Long-term exposure limit (8-hour TWA): WEL 274 mg/m3 50 ppm WEL = Workplace Exposure Limit ACETONE (CAS: 67-64-1) DNEL Workers - Dermal; Long term systemic effects: 186 mg/kg/day Workers - Inhalation; Short term local effects: 2420 mg/m³ Workers - Inhalation; Long term systemic effects: 1210 mg/m³ PNEC - Sediment (Freshwater); 30.4 mg/kg - Sediment (Marinewater); 3.04 mg/kg - Marine water; 1.06 mg/l - Soil; 29.5 mg/kg 2-METHOXY-1-METHYLETHYL ACETATE (CAS: 108-65-6) DNEL Consumer - Oral; Long term systemic effects: 1.67 mg/kg/day Consumer - Dermal; Long term systemic effects: 54.8 mg/kg/day Workers - Dermal; Long term systemic effects: 153.5 mg/kg/day Consumer - Inhalation; Long term systemic effects: 33 mg/m3 Workers - Inhalation; Long term systemic effects: 275 mg/m³ PNEC - Fresh water; 0.635 mg/l - Sediment (Freshwater); 3.29 mg/kg - Sediment (Marinewater); 0.329 mg/kg - Soil; 0.29 mg/kg 8.2. Exposure controls Eye/face protection Eyewear complying with an approved standard should be worn if a risk assessment indicates eye contact is possible. Anglo Adhesives & Services Limited - Fixative Spray Aerosols Hand protection No specific hand protection recommended. Other skin and body protection Wear suitable protective equipment for prolonged exposure and/or high concentrations of vapours, spray or mist. Respiratory protection No specific recommendations. If ventilation is inadequate, suitable respiratory protection must be worn. 9.1. Information on basic physical and chemical properties Appearance Aerosol. Colour Clear. Odour Solvent. Odour threshold No information available. pH No information available. Melting point No information available. Initial boiling point and range -41 (-41 TO 143)°C @ Flash point -4°C CC (Closed cup). Evaporation rate No information available. Evaporation factor No information available. Flammability (solid, gas) No information available. Upper/lower flammability or explosive limits Lower flammable/explosive limit 1.5 % Upper flammable/explosive limit 13.0 % Vapour pressure No information available. Vapour density No information available. Relative density 0.7 Solubility(ies) Insoluble in water. Partition coefficient No information available. Auto-ignition temperature 333°C Decomposition Temperature No information available. Viscosity Anglo Adhesives & Services Limited - Fixative Spray Aerosols No information available. Oxidising properties No information available.

Further information

None. 10.1. Reactivity No test data specifically related to reactivity available for this product or its ingredients. 10.2. Chemical stability Stability The product may not be stable under some conditions of storage or use. 10.3. Possibility of hazardous reactions None known. 10.4. Conditions to avoid Avoid heat, flames and other sources of ignition. Avoid exposing aerosol containers to high temperatures or direct sunlight. 10.5. Incompatible materials Materials to avoid None known. 10.6. Hazardous decomposition products None at ambient temperatures. 11.1. Information on toxicological effects Inhalation May cause drowsiness or dizziness. Vapours in high concentrations are narcotic. Vapours may cause headache, fatigue, dizziness and nausea. Skin contact Skin irritation should not occur when used as recommended. Eye contact Causes serious eye irritation. Acute and chronic health hazards No known chronic or acute health risks.

Principle Routes of Exposure

10/1 1 Inhalation Skin and/or eye contact Toxicological information on ingredients. Anglo Adhesives & Services Limited - Fixative Spray Aerosols ACETONE Acute toxicity - oral Acute toxicity oral (LD50 mg/kg) 5,800.0 Species Rat ATE oral (mg/kg) 5,800.0 Acute toxicity - dermal Acute toxicity dermal (LD50 mg/kg) 7800.0 Species Rabbit ATE dermal (mg/kg) 7800.0 Acute toxicity - inhalation Acute toxicity inhalation (LC50 vapours mg/l) 21.0 Species Rat ATE inhalation (vapours mg/l) 21.0 12800.0 Acute toxicity - oral Acute toxicity - inhalation Acute toxicity oral (LD50 mg/kg) 5,045.0 Species Rat ATE oral (mg/kg) 5,045.0 Acute toxicity - dermal Acute toxicity dermal (LD50 mg/kg) 12800.0 Species Rabbit ATE dermal (mg/kg) 12/1 1 PROPAN-2-OL Acute toxicity inhalation (LC50 vapours mg/l) 30.0 Species Rat ATE inhalation (vapours mg/l) 30.0 13/1 1 Anglo Adhesives & Services Limited - Fixative Spray Aerosols 2-METHOXY-1-METHYLETHYL ACETATE Acute toxicity - oral Acute toxicity oral (LD50 mg/kg) 5,001.0 Species Rat ATE oral (mg/kg) 5,001.0 Acute toxicity - dermal Acute toxicity dermal (LD50 mg/kg) 5001.0 Species Rabbit ATE dermal (mg/kg) 5001.0 12.1. Toxicity Ecological information on ingredients. ACETONE

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.