Note: Ingredients listed on restricted chemical lists
EC/CAS
111-40-0
Name of the chemical
2,2'-iminodi(ethylamine)
Concentration
N/A
EC/CAS
80-05-7
Name of the chemical
4,4'-isopropylidenediphenol
Concentration
N/A
EC/CAS
84852-15-3
Name of the chemical
Nonylphenol (NP), mixed isomers
Concentration
N/A
General Information
Revision date
2015-05-01
Product name
LEAKMASTER C4121D, PART B
Product Synonyms
Epoxy Hardener
Emergency telephone
1-800-348-1316
Icons in SDS
Company Information
company name
ANDERSON MANUFACTURING CO., INC
GHS Information
Signal word
DANGER
Section 2
Principle Routes of Exposure
Eye Contact, Skin Contact, Ingestion, Inhalation, Skin Absorption Skin Contact: Severe irritant, may cause skin sensitization, corrosive. Eye Contact: Severe irritant, corrosive. Inhalation: Severe irritant, corrosive.
Precautionary statements
Do not handle until all safety precautions have been read and understood. Do not breathe vapors. In case of inadequate ventilation wear respiratory protection. Wear protective gloves and eye protection. Do not eat, drink or smoke when using this product. Wash thoroughly after handling. Store locked up. Keep away from children. Dispose of contents and container in accordance with applicable local, regional and national regulations.
Signal word
DANGER Hazard Statment: Corrosive to eyes. Corrosive to respiratory system. Corrosive to skin. Severe eye irritant. Severe respiratory tract irritant. Severe skin irritant. May cause skin sensitization. Target Organs: Eye Skin Respiratory system Signs And Symptoms Of Exposure (Acute Effects) Product vapor in low concentrations can cause lacrimation, conjunctivitis and corneal edema when absorbed into the tissue of the eye from the atmosphere. Corneal edema may give rise to a perception of ‘’blue haze’’or ‘’fog’’ around lights. The effect is transient and has no known residual effect. Burns of the eye may cause blindness. Contact with the skin may cause dryness (defatting), itching and/or rash. Contact of undiluted product with the eyes or skin quickly causes severe irritation and pain and may cause burns, necrosis and permanent injury. Inhalation of vapors may severely damage contacted tissue and produce scarring. Inhalation of aerosols and mists may severely damage contacted tissue and produce scarring. Risk of exposure to hazardous concentrations of vapor under normal working conditions in a well-ventilated space is minimal. However, conditions such as spraying, or sudden release of hot liquid, which generate an aerosol, mists or fog should be avoided. Product is absorbed through the skin and may cause nausea, headache and general discomfort. Exposure (Possible Longer Term Effects): Repeated and/or prolonged exposure may cause allergic reaction/ sensitization. Repeated and/or prolonged exposures may result in: adverse respiratory effects (such as cough, tightness of chest or shortness of breath), adverse eye effects (such as conjunctivitis or corneal damage), adverse skin effects (such as defatting, rash, or irritation), adverse skin effects (such as rash, irritation or corrosion). Effects from inhalation of vapors may be delayed. Dryness of nasal passages may be experienced when material is inhaled over a long period of time. Repeated and/or prolonged exposure to low concentrations of vapor may cause: sore throat which are transient.