Wearcoat 66 - Part A

Andek Corporation

Revision date : 2022-08-06

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.
GHS08 GHS02 GHS07
Health risk rating 2
Safety risk rating 1
Environmental risk rating 1

Note: Ingredients listed on restricted chemical lists

EC/CAS

64742-95-6

Name of the chemical

Solvent naphtha (petroleum), light arom

Concentration

N/A

EC/CAS

4098-71-9

Name of the chemical

3-isocyanatomethyl-3,5,5-trimethylcyclohexyl isocyanate

Concentration

<1.0

General Information

Revision date

2022-08-06

Product name

Wearcoat 66 - Part A

1.2.1 Relevant identified uses

Industrial Protective and Maintenance Coating

Manufacturer Name

Andek Corporation

Emergency telephone

1-856-786-6900, 1-800- 424-9300, +1-703-527-3887

Icons in SDS

GHS02 GHS07 GHS08 M004 M009 M010 M011 M017

Company Information

company name

Andek Corporation

Section 2

SECTION 2: Hazards identification

HAZARD CLASSIFICATION Skin: Irritant Eyes: Reversible Inhalation: Low to moderate sensitivity. May cause sensitization Ingestion: Do Not ingest SIGNAL WORD: Danger HAZARD STATEMENTS Contains monomeric isophorone diisocyanate Causes skin irritation May cause allergic skin reaction May cause allergic respiratory reaction May cause eye irritation May be harmful if aerosol or mist is inhaled Closed containers may explode under extreme heat or when contaminated with water Use cold water spray to cool fire-exposed containers to minimize the risk of rupture. Toxic gases / fumes are given off during burning or thermal decomposition Do Not seal containers that have been contaminated with water Flammable liquid and vapor PICTOGRAMS

Prevention

• Do Not handle until all safety precautions have been read and understood. • Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. • Keep container tightly closed. • Ground/bond container and receiving equipment. • Protect from moisture. • Do Not spray on an open flame or other ignition source. • Use explosion-proof electrical/ventilating/light/equipment. • Take precautionary measures against static discharge. • Avoid breathing spray. • Do Not get in eyes, on skin, or on clothing. • Wear protective gloves/protective clothing/eye protection/face protection.

Response

• Wash contaminated clothing before reuse. • Rinse skin with water/shower • In case of fire use water fog, carbon dioxide, foam or dry chemical to extinguish. • Rinse mouth. Do Not induce vomiting • If in eyes: Rinse cautiously with water for 15 minutes. Remove contact lenses if present and easy to do and continue rinsing. • If inhaled; remove person to fresh air and keep comfortable for breathing.

Storage

• Store in a well ventilated place. • Keep container tightly closed.

Disposal

• Waste disposal should be in accordance with existing federal, state and local environmental control laws. • Incineration is the preferred method.

2.1 Classification of the substance or mixture

Skin: Irritant Eyes: Reversible Inhalation: Low to moderate sensitivity. May cause sensitization. Ingestion: Do Not ingest

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.