Note: Ingredients listed on restricted chemical lists
EC/CAS
64742-95-6
Name of the chemical
Solvent naphtha (petroleum), light arom
Concentration
N/A
EC/CAS
4098-71-9
Name of the chemical
3-isocyanatomethyl-3,5,5-trimethylcyclohexyl isocyanate
Concentration
<1.0
General Information
Revision date
2018-09-25
Product name
Clearcoat 44
1.2.1 Relevant identified uses
Industrial Protective and Maintenance Coating
Manufacturer Name
Andek Corporation
Emergency telephone
1-856-786-6900, 1-800- 424-9300, +1-703-527-3887
Icons in SDS
Company Information
company name
Andek Corporation
GHS Information
Signal word
Danger
Section 2
SECTION 2: Hazards identification
2.1 Classification of the substance or mixture
Skin: Sensitization – Category 1 Eyes: Irritant – Category 2A Inhalation: May cause sensitization – Category 1 / Toxicity – Category 2A Carcinogenicity: Category 2
Signal word
Danger
Hazard statements
Contains monomeric isophorone diisocyanate. Causes skin irritation. May cause allergic skin reaction May cause allergic respiratory reaction May cause eye irritation. May be harmful if aerosol or mist is inhaled. Closed containers may explode under extreme heat or when contaminated with water. Use cold water spray to cool fire-exposed containers to minimize the risk of rupture. Toxic gases / fumes are given off during burning or thermal decomposition. Do Not seal containers that have been contaminated with water. Flammable liquid and vapor.
Prevention
Do Not handle until all safety precautions have been read and understood. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Keep container tightly closed. Ground/bond container and receiving equipment. Protect from moisture. Do Not spray on an open flame or other ignition source. Use explosion-proof electrical/ventilating/light/equipment. Take precautionary measures against static discharge. Avoid breathing spray. Do Not get in eyes, on skin, or on clothing Wear protective gloves/protective clothing/eye protection/face protection.
Response
Wash contaminated clothing before reuse. Rinse skin with water/shower. In case of fire use water fog, carbon dioxide, foam or dry chemical to extinguish. Rinse mouth. Do Not induce vomiting. If in eyes: Rinse cautiously with water for 15 minutes. Remove contact lenses if present and easy to do. Continue rinsing If inhaled: Remove person to fresh air and keep comfortable for breathing.
Storage
Store in a well ventilated place. Keep container tightly closed.
Disposal
Waste disposal should be in accordance with existing federal, state and local environmental control laws. Incineration is the preferred method.