Note: Ingredients listed on restricted chemical lists
EC/CAS
64742-95-6
Name of the chemical
Solvent naphtha (petroleum), light arom
Concentration
N/A
EC/CAS
63449-39-8
Name of the chemical
Paraffin waxes, chloro
Concentration
N/A
EC/CAS
101-68-8
Name of the chemical
4,4’-Methylenediphenyl diisocyanate
Concentration
N/A
General Information
Revision date
2018-09-28
Product name
Aim 1
Manufacturer Name
Andek Corporation
Icons in SDS
Company Information
company name
Andek Corporation
Section 2
2.1 Classification of the substance or mixture
Skin: Irritant – Category 2 Eye: Damage / Irritation – Category 2A Inhalation: Vapor toxicity – Category 2 / Respiratory Sensitization – Category 1 Carcinogenicity: Category 2
Hazard statements
Combustible liquid. Flammable liquid and vapor. Causes eye irritation. Toxic gases/fumes may be given off during burning or thermal decomposition. Closed container may forcibly rupture under extreme heat or when contents have been contaminated with water. Use cold water spray to cool fire-exposed containers to minimize the risk of rupture. Causes respiratory tract irritation. May cause allergic respiratory reaction. Harmful if inhaled. Respiratory sensitizer. Lung damage and respiratory sensitization may be permanent. Causes skin irritation. May cause allergic skin reaction. Skin sensitizer. Animal tests and other research indicate that skin contact with MDI can play a role in causing isocyanate sensitization and respiratory reaction.
Prevention
Do Not handle until all safety precautions have been read and understood. Do Not allow contact with water. Protect from moisture. If moisture enters container, pressure can build up which can cause a sealed container to pressurize and burst. Keep container tightly closed. Keep only in original container. Avoid breathing mist or spray. Do Not get in eyes, on skin, or on clothing. Wash thoroughly after handling. Do Not eat, drink or smoke when using this product. Use only outdoors or in a well-ventilated area. Contaminated work clothing should not be allowed out of the workplace. Wear protective gloves/protective clothing/eye protection/face protection. If swallowed: Immediately call a POISON CENTER/ doctor. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Take precautionary measures against static discharge.
Response
Skin: Remove contaminated clothing. Wash affected areas thoroughly with soap and water. Eyes: Flush with clean lukewarm water (low pressure) for at least 15 minutes and obtain medical attention immediately. Inhalation: Remove victim to fresh air. Administer oxygen or artificial respiration as needed. Obtain medical attention. Asthmatic type symptoms may develop and may be immediate or delayed up to several hours. Treatment is essentially symptomatic. Ingestion: Do Not induce vomiting. Give 250 ml of milk or water to drink and get immediate medical attention.
Storage
Store in tightly closed containers Protect from moisture and foreign materials. Ideal storage temperature range is 50-81°F.
Disposal
Waste Disposal Method: Waste disposal should be in accordance with existing federal, state and local environmental control laws. Incineration is the preferred method. Empty Container Precautions: Empty containers retain product residue Observe all precautions for product. Do Not heat or cut empty container with electric or gas torch. Do Not reuse without thorough commercial cleaning and reconditioning. If container is to be disposed, ensure all product residues are removed prior to disposal.