ATL Air Tool Lubricant

SECTION 2: Hazards identification

Health Flammability Reactivity 110 FLAMMABLE OR BXPLOSIVE LIMITS (approximate percent by volume in air): Estimated values: lower 1% upper 6% EXTINGUISHED MEDIA AND FIRE FIGHTING PROCEDURES: Foam, water spray (fog), dry chemical, carbon dioxide and vaporizing liquid type extinguishing agents may all be suitable for extinguishing fires involving this type product, depending on size or potential size of fire and circumstances related to the situation. Plan fire protection and response strategy through consultation with local fire protection authorities or appropriate specialists. The following procedures for this type of product are based on the recommen~ dations in the National Fire Protection Association's " Fire Protection Guide on Hazardous Materials", Bighth Edition (1984): Use water spray, dry chemical, foam, or carbon dioxide. Water or foam may cause frothing. Use water to keep fire~exposed containers cool. Water froth may be used to flush spills away from exposure. Minimize breathing gases, vapor, fumes, or decomposition products. Use supplied-air breathing equipment for enclosed or confined spaces or as otherwise needed. UNUSUAL FIRE AND EXPLOSION HAZARDS: N/A "EMPTY" CONTAINER WARNING: Empty containers retain residue ( liquid or vapor) and can be dangerous. DO NOT PRESSURIZE, WELD, CUT BRAZE, SOLDER, DRILL, GRIND OR EXPOSE SUCH CONTAINERS TO HEAT, FLAME, SPARKS, OR OTHER SOURCES OF IGNITION; THEY MAY BXPLODE AND CAUSE INJURY OR DEATH. Do not attempt to clean since residue is difficult to remove, “Empty"drums should be completely drained, properly bunged, and returned to a drum reconditioner. All other containers should be disposed of in an environmentally safe manner and in accordance with government regulations. For work on tanks refer to Occupational Safety and Health Administration regulations, ANSI 249.1, and other vernmental and industrial references pertaining to cleaning, repairing, welding, or other contemplated operations. EXPOSURE LIMIT FOR TOTAL PRODUCT: 5 mg/cubic meter for oil mist in air BASIS