Cammy Top Topcoats -- Aerosols

SECTION 2: Hazards identification

sunlight, radiators, stoves, hot water, and other heat sources could cause container to burst. Do not take internally. Keep out of reach of children.

Storage

CATEGORY – NFPA 30B Level 2 Aerosol

Principle Routes of Exposure

Exposure may be by INHALATION and/or SKIN or EYE contact, depending on Do not store where temperatures may exceed 120F (48.9C). conditions of use. To minimize exposure, follow recommendations for proper use, ventilation, and personal protective equipment. EFFECTS OF OVEREXPOSURE: Irritation of eyes, skin and upper respiratory system. May cause nervous Section 8  Exposure Controls/Personal Protection system depression. Extreme overexposure may result in unconsciousness and possibly death. SIGNS AND SYMPTOMS OF OVEREXPOSURE: Headache, dizziness, nausea, and loss of coordination are ENGINEERING CONTROLS: Local Exhaust preferable. General exhaust acceptable if the exposure to materials indications of excessive exposure to vapors or spray mists. Redness and itching or burning sensation may in Section 2 is maintained below applicable exposure limits. indicate eye or excessive skin exposure. RESPIRATORY PROTECTION: If personal exposure cannot be controlled to below applicable limits by

Medical Conditions Generally Aggravated by Exposure

None generally recognized ventilation, wear a properly fitted organic vapor/particulate respirator approved by NIOSH/MSHA for protection

Cancer information

For complete discussion of toxicology data refer to Section 11 against materials in Section 2. When sanding or abrading the dried film, wear a dust/mist respirator approved by NIOSH/MSHA for dust that may be generated from this product, underlying paint, or the abrasive.