Note: Ingredients listed on restricted chemical lists
EC/CAS
9016-87-9
Name of the chemical
4,4'-Methylendiphenyldiisocyanat tech. (Polymeres) MDI, pMDI (in Form atembarer Aerosole, A-Fraktion)
Concentration
N/A
EC/CAS
13674-84-5
Name of the chemical
Tris(2-chloro-1-methylethyl) phosphate
Concentration
N/A
General Information
Revision date
2018-03-02
Product name
AFT Two Part Foam Sealant
Emergency telephone
1-800-535-5053 (USA) 1-352-323-3500
Icons in SDS
Company Information
company name
American Polywater Corporation
e-mail address of the competent person responsible for the Safety Data Sheet
sds@polywater.com
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H222, H229, H315, H317, H319, H334, H335, H373
Hazard statements
Code
Statements
H222
Extremely flammable aerosol
Section 2
OSHA HCS Classification
29 CFR 1910.1200 Flam Aerosol 1; H222, H229 Skin Irritation, Cat 2; H315 Eye Irritation, Cat 2A; H319 Respiratory Sensitization, Cat 1; H334 Skin Sensitization, Cat 1; H317 Target Organ Toxicity (single exposure), Cat 3; H335 Target Organ Toxicity (repeated exposure), Cat 2; H373
2.2 Label elements
This product is intended for consumer use and is labeled according to CPSC guidelines and not to GHS guidelines listed below. It is safe for consumers and other users under normal and reasonably foreseeable use. The SDS contains valuable information for industrial workplace conditions.
Contains
Polymeric diphenylmethane diisocyanate; 2-propanol, 1-chloro-, Phosphate (3:1)
Signal word
Danger
Hazard statements
H222 Extremely flammable aerosol. H229 Pressurized container: may burst if heated. H315 Causes skin irritation. H317 May cause an allergic skin reaction. H319 Causes serious eye irritation. H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled. H335 May cause respiratory irritation. H373 May cause damage to organs through prolonged or repeated inhalative exposure.
Precautionary statements
P210 Keep away from heat/sparks/open flames/hot surfaces. No smoking. P211 Do not spray on an open flame or other ignition source. P251 Do not pierce or burn, even after use. P260 Do not breathe fumes. P270 Do not eat drink or smoke when using this product. P271 Use only outdoors or in a well-ventilated area. P280 Wear protective gloves, protective clothing and eye protection. P284 In case of inadequate ventilation wear respiratory protection. IF INHALED: Remove to fresh air and keep at rest in a position comfortable for P304 + P340 breathing. P305 + P351 + IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if P338 present and easy to do. Continue rinsing. P342 + P311 If experiencing respiratory symptoms: Call a poison center or doctor. P410 + P412 Protect from sunlight. Do not expose to temperatures exceeding 50°C/122°F P501 Dispose of contents/container in accordance with local and national regulations. Notes: 4,4'-methylenediphenyl diisocyanate (MDI, precursor to the polymeric form) has not been designated as a carcinogen by IARC, NTP, ACGIH, OSHA, or the EPA. There are inadequate human carcinogenicity data, and only limited animal data. Additionally, the IARC Working Group noted that tumorigenic effects observed in animals may be attributed to non-specific particle effect (IARC monograph 71). We have not classified substance as a carcinogen, but recommend that users avoid inhalation of vapor above exposure limits.
2.3 Other hazards
No information available.