Note: Ingredients listed on restricted chemical lists
EC/CAS
215-138-9/1305-78-8
Name of the chemical
Calcium oxide
Concentration
2.5-5%
EC/CAS
202-966-0/101-68-8
Name of the chemical
4,4’-Methylenediphenyl diisocyanate
Concentration
0.25-0.49%
EC/CAS
238-878-4/14808-60-7
Name of the chemical
Silica, crystalline
Concentration
0.25-0.49%
General Information
Revision date
2024-09-25
Product name
AD-599MR
1.2.1 Relevant identified uses
Polyurethane-based adhesive
supplier name
American Biltrite
Emergency telephone
1-800-255-3924
Icons in SDS
Company Information
company name
American Biltrite
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H317, H319, H334, H351
Hazard statements
Code
Statements
H317
May cause an allergic skin reaction
Section 2
SECTION 2: Hazards identification
2.1 Classification of the substance or mixture
Eye irritation, Category 2A Causes serious eye irritation. Respiratory Sensitization, Category 1 May cause allergy or asthma symptoms or breathing difficulties if inhaled. Skin Sensitization, Category 1 May cause an allergic skin reaction. Carcinogenicity, Category 2 Suspected of causing cancer if inhaled, in contact with skin and if swallowed.
2.2 Label elements
Hazard pictograms and Signal Word Danger
Hazard statements
H317 May cause an allergic skin reaction. H319 Causes serious eye irritation. H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled. H351 Suspected of causing cancer if inhaled, in contact with skin and if swallowed.
Precautionary statements
P201 Obtain special instructions before use. P202 Do not handle until all safety precautions have been read and understood. P261 Avoid breathing mist/vapours/spray. P264 Wash skin thoroughly after handling. P280 Wear protective gloves/protective clothing/eye protection/face protection. P284 [In case of inadequate ventilation] wear respiratory protection. P302+P352 IF ON SKIN: Wash with plenty of water. P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing. P305+P351+P33 8 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P308+P313 IF exposed or concerned: Get medical advice/attention. P333+P313 If skin irritation or rash occurs: Get medical advice/attention. P337+P313 If eye irritation persists: Get medical advice/attention. P342+P311 If experiencing respiratory symptoms: Call a doctor. P362+P364 Take off contaminated clothing and wash it before reuse. P501 Dispose of contents/container in accordance with applicable regulations.
Other hazards
None
Ingredient(s) with unknown acute toxicity
None This product contains crystalline silica (quartz sand). IARC has classified crystalline silica as a Group 1 carcinogen. Both IARC and NTP consider silica as a known human carcinogen. Evidence is based on the chronic and long-term exposure workers have had to respirable sized crystalline silica dust particles. Because this product is in liquid or paste form, it does not pose a dust hazard; therefore, this classification is not relevant. (Note: sanding of the hardened product may create a silica dust hazard)