Note: Ingredients listed on restricted chemical lists
EC/CAS
9016-87-9
Name of the chemical
4,4'-Methylendiphenyldiisocyanat tech. (Polymeres) MDI, pMDI (in Form atembarer Aerosole, A-Fraktion)
Concentration
45-50%
EC/CAS
237-158-7/13674-84-5
Name of the chemical
Tris(2-chloro-1-methylethyl) phosphate
Concentration
10-20%
EC/CAS
200-857-2/75-28-5
Name of the chemical
iso-Butan, enthält 0,1% Butadien
Concentration
2,5-10%
EC/CAS
253-057-0/36483-57-5
Name of the chemical
2,2-Dimethylpropan-1-ol, Tribromderivat; 3-Brom-2,2-bis(brommethyl)-propan-1-ol (2022/692)
Concentration
1-<5%
General Information
Revision date
2020-12-07
Product name
alwitra Klebstoff PUR S750
1.2.1 Relevant identified uses
Used for bonding of fleece-backed EVALON® and EVALASTIC® roofing and sealing membranes
Icons in SDS
Company Information
company name
alwitra GmbH
e-mail address of the competent person responsible for the Safety Data Sheet
pm-ddb@alwitra.de
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H222, H229, H315, H317, H319, H332, H334, H335, H351, H373
Hazard statements
Code
Statements
H222
Extremely flammable aerosol
Section 2
2.1 Classification of the substance or mixture
Regulation (EC) No. 1272/2008
Hazard categories
Aerosol: Aerosol 1 Acute toxicity: Acute Tox. 4 Skin corrosion/irritation: Skin Irrit. 2 Serious eye damage/eye irritation: Eye Irrit. 2 Respiratory or skin sensitisation: Resp. Sens. 1 Respiratory or skin sensitisation: Skin Sens. 1 Carcinogenicity: Carc. 2 Specific target organ toxicity - single exposure: STOT SE 3 Specific target organ toxicity - repeated exposure: STOT RE 2
Hazard statements
Extremely flammable aerosol. Pressurised container: May burst if heated. Harmful if inhaled. Causes skin irritation. Causes serious eye irritation. May cause allergy or asthma symptoms or breathing difficulties if inhaled. May cause an allergic skin reaction. Suspected of causing cancer. May cause respiratory irritation. May cause damage to organs through prolonged or repeated exposure. H222 Extremely flammable aerosol. H229 Pressurised container: May burst if heated. H315 Causes skin irritation. H317 May cause an allergic skin reaction. H319 Causes serious eye irritation. H332 Harmful if inhaled. H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled. H335 May cause respiratory irritation. H351 Suspected of causing cancer. H373 May cause damage to organs through prolonged or repeated exposure.
2.2 Label elements
Regulation (EC) No. 1272/2008
Hazardous Ingredients
Diphenylmethanediisocyanate - Isomers & Homologues
Signal word
Danger
Precautionary statements
P102 Keep out of reach of children. P101 If medical advice is needed, have product container or label at hand. P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P211 Do not spray on an open flame or other ignition source. P251 Do not pierce or burn, even after use. P260 Do not breathe dust/fume/gas/mist/vapours/spray. P271 Use only outdoors or in a well-ventilated area. P280 Wear protective gloves and eye/face protection. P331 Do NOT induce vomiting. P301+P310 IF SWALLOWED: Immediately call a POISON CENTER/doctor. P302+P352 IF ON SKIN: Wash with plenty of water. P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing. P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P405 Store locked up. P410+P412 Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F. P501 Dispose of contents/container according to regional/national regulations. Do not discard with household waste.
Special rules for supplemental label elements for certain mixtures
EUH204 Contains isocyanates. May produce an allergic reaction.
2.3 Other hazards
In case of insufficient ventilation and/or through use, explosive/highly flammable mixtures may develop. Contains isocyanates. May produce an allergic reaction. Persons already sensitised to diisocyanates may develop allergic reactions when using this product. Persons suffering from asthma, eczema or skin problems should avoid contact, including dermal contact, with this product. This product should not be used under conditions of poor ventilation unless a protective mask with an appropriate gas filter (i.e. type A1 according to standard EN 14387) is used. The components in this mixture do not meet the criteria for classification as PBT or vPvB .