ALUCOSIGN FR

SECTION 2: Hazards identification

Alucopanel ® product is not considered as health hazard in the form in which they are sold. However, dust and fumes can be generated during process of welding, melting and cutting which can be considered as hazardous and may cause irritation of eyes, skin and upper respiratory tract. Contact with molten polymer can cause thermal burns. Combustion of the coatings can generate toxic and irritating gases.

Potential health effects

The following health effects are not likely to occur unless sawing or cutting generates dust or unless polymer is heated to melting. Eyes: Can cause irritation. Skin: Can cause irritation. Contact with molten polymer can cause thermal burns. Inhalation: Slight irritation of respiratory tract. Ingestion effects: ND Carcinogenicity: N/A

Medical Conditions Generally Aggravated by Exposure

Accumulation of dust in the respiratory system may cause moderate congestion. SECTION 3 – CHEMICAL COMPOSITION INGREDIENT CAS NUMBER % COMPOSITION Aluminum 7429-90-5 20 Inorganic Fillers N/A 75 Fluoro polymer coating N/A 2.5 Adhesive Film N/A 2.5 Eyes: Dust from processing: Flush eyes with plenty of water or saline for at least 15 minutes. Consult a physician. Skin: Dust from processing: Wash skin with soap and water for at least 15 minutes. Consult a physician if irritation persists. Molten polymer: If molten polymer gets on skin, cool rapidly with cold water. Do not attempt to peel material from skin. Get medical treatment for thermal burns. Inhalation: Dust from processing: Remove to fresh air. If unconscious or severely injured, check for clear airway, breathing and presence of pulse. Perform CPR if there is no pulse or respiration. SECTION 5 - FIRE FIGHTING MEASURES Flammable/Combustible Properties This product does not present fire or explosion hazards as shipped. Small chips, turnings, dust and fines from processing may be readily ignitable. Extinguishing Media Dry chemical powder, foam, carbon dioxide