Note: Ingredients listed on restricted chemical lists
EC/CAS
905-806-4/26447-40-5
Name of the chemical
Methylenediphenyl diisocyanate (see also specific isomers)
Concentration
≥50
EC/CAS
618-498-9/9016-87-9
Name of the chemical
4,4'-Methylendiphenyldiisocyanat tech. (Polymeres) MDI, pMDI (in Form atembarer Aerosole, A-Fraktion)
Concentration
≥15
General Information
Version
3.0
Revision date
2023-06-19
Product name
Altro Crete 6mm Slip-resistant / Altro Crete 8mm Slip-resistant Hardener
1.2.1 Relevant identified uses
Professional use,Industrial use
supplier name
Other
Icons in SDS
Company Information
company name
Altro Resin Systems
e-mail address of the competent person responsible for the Safety Data Sheet
sds@altro.com
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H315, H317, H319, H332, H334, H335, H351, H373
Hazard statements
Code
Statements
H315
Causes skin irritation
H317
May cause an allergic skin reaction
H319
Causes serious eye irritation
H332
Harmful if inhaled
H334
May cause allergy or asthma symptoms or breathing difficulties if inhaled
H335
May cause respiratory irritation
H351
Suspected of causing cancer
H373
May cause damage to organs through prolonged or repeated exposure
Section 2
SECTION 2: Hazards identification
Adverse physicochemical, human health and environmental effects
No additional information available
2.2 Label elements
Labelling
Hazard pictograms
GHS07 GHS08
Signal word
Danger
Contains
Diphenylmethane-4,4-Diisocyante (MDI) Isomers; Reaction mass of 4,4-methylenediphenyl diisocyanate and o-(p-isocyanatobenzyl)phenyl isocyanate
Hazard statements
H315 - Causes skin irritation. H317 - May cause an allergic skin reaction. H319 - Causes serious eye irritation. H332 - Harmful if inhaled. H334 - May cause allergy or asthma symptoms or breathing difficulties if inhaled. H335 - May cause respiratory irritation. H351 - Suspected of causing cancer. H373 - May cause damage to organs through prolonged or repeated exposure.
Precautionary statements
P201 - Obtain special instructions before use. P261 - Avoid breathing spray, vapours. P264 - Wash Skin or affected areas thoroughly after handling. P280 - Wear eye protection, protective clothing, protective gloves. P304+P340 - IF INHALED: Remove person to fresh air and keep comfortable for breathing. P308+P313 - IF exposed or concerned: Get medical advice/attention. P312 - Call a POISON CENTER, doctor if you feel unwell. P314 - Get medical advice/attention if you feel unwell. P321 - Specific treatment (see supplemental first aid instruction on this label). P333+P313 - If skin irritation or rash occurs: Get medical advice/attention. P337+P313 - If eye irritation persists: Get medical advice/attention. P342+P311 - If experiencing respiratory symptoms: Call a POISON CENTER, doctor. P362+P364 - Take off contaminated clothing and wash it before reuse.
Additional information
As from 24 August 2023 adequate training is required before industrial or professional use.
2.3 Other hazards
Contains no PBT/vPvB substances ≥ 0.1% assessed in accordance with REACH Annex XIII The mixture does not contain substance(s) included in the list established in accordance with Article 59(1) of REACH for having endocrine disrupting properties, or is not identified as having endocrine disrupting properties in accordance with the criteria set out in Commission Delegated Regulation (EU) 2017/2100 or Commission Regulation (EU) 2018/605 at a concentration equal to or greater than 0,1 %