Note: Ingredients listed on restricted chemical lists
EC/CAS
13463-67-7
Name of the chemical
Reaction mass of titanium dioxide and silver chloride
Concentration
N/A
EC/CAS
14807-96-6
Name of the chemical
Talc
Concentration
N/A
EC/CAS
236-675-5
Name of the chemical
Titandioxid; [in Pulverform mit mindestens 1 % Partikel mit aerodynamischem Durchmesser ≤ 10 μm] (2020/217)
Concentration
N/A
EC/CAS
238-877-9
Name of the chemical
Talc: Hydrated magnesium silicate
Concentration
N/A
General Information
Revision date
2020-12-03
Product name
Universal-Weiß
1.2.1 Relevant identified uses
Water-borne coatings
1.2.2. Uses advised against
within adequate application - none on use
Icons in SDS
Company Information
company name
Alpina Farben GmbH
e-mail address of the competent person responsible for the Safety Data Sheet
msds@dr-rmi.com
GHS Information
Signal word
Warning!
Section 2
CLP CLASSIFICATION
Not a hazardous substance or mixture.
2.2 Label elements
REGULATION (EC) No 1272/2008) Not a hazardous substance or mixture.
Precautionary statements
P101 If medical advice is needed, have product container or label at hand. P102 Keep out of reach of children.
Additional information
EUH211 Warning! Hazardous respirable droplets may be formed when sprayed. Do not breathe spray or mist.
2.3 Other hazards
This substance/mixture contains no components considered to be either persistent, bioaccumula- tive and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher. Ensure good ventilation during use and drying. Do not eat, drink or smoke while using the prod- uct. In case of contact with eyes or skin, immediately and thoroughly rinse with water. Do not al- low product to enter drains, waterways or soil. Clean utensils immediately after use with soap and water. Use P2 dust filter for grinding. Do not breathe spray dust. Use A2/P2 combination filter and goggles for paint spraying.
