Note: Ingredients listed on restricted chemical lists
EC/CAS
101-68-8
Name of the chemical
4,4’-Methylenediphenyl diisocyanate
Concentration
N/A
EC/CAS
14807-96-6
Name of the chemical
Talc
Concentration
N/A
General Information
Revision date
2020-03-16
Product name
PARBOND 905 PART A
Icons in SDS
Company Information
company name
ALP OZ Auto Moulds Pty Ltd
e-mail address of the competent person responsible for the Safety Data Sheet
sales@alpoz.com.au
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H315, H317, H320, H332, H334
Hazard statements
Code
Statements
H315
Causes skin irritation
Section 2
SECTION 2: Hazards identification
GHS Classification Information In accordance with 29 CFR 1910.1200
2.1 Classification of the substance or mixture
Acute Toxicity Inhalation Category 4 Skin Irritation Category 2 Eye Irritation Category 2A Respiratory Sensitization Category 1 Skin Sensitization Category 1
Signal word
Danger
Hazard statements
H315: Causes Skin Irritation H317: May cause Allergic skin reaction H320: Causes eye irritation H332: Harmful if inhaled H334: May cause allergy or asthma symptoms or breathing difficulties if inhaled
Precautionary statements
P261: Do not breath vapors, mist or spray P264: Wash thoroughly hands after handling P270: Do not eat drink or smoke when using this product. P271: Use only outdoors or in well-ventilated area. P280: Wear eye and face protection. Wear protective gloves P285: In case of inadequate ventilation wear respiratory protection. P302+P352 If on Skin wash with plenty of soap and water P304+P340 If inhaled Remove person to fresh air and keep comfortable for breathing P305+P351+P388 If in eyes Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do so. Continue rinsing. P333+P313 If skin irritation or rush occurs Get medical attention P337+P313 If eye irritation persists Get medical attention P342+P311 If experiencing respiratory symptoms Call a poison center or physician P362: Take off contaminated clothing and wash before reuse. P403: Store in a well-ventilated place P232: Protect from moisture P233: Keep container tightly closed P501: Dispose of contents and /or container according to Federal State/Provincial and local governmental regulations. Product Code: PARBOND 905 PART A