Mold Release Spray, PTFE Based

Allied High Tech Products Inc

Revision date : 2020-04-06

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.
GHS07 GHS09 GHS08 GHS04 GHS02
Health risk rating 4
Safety risk rating 4
Environmental risk rating 4

Note: Ingredients listed on restricted chemical lists

EC/CAS

75-37-6

Name of the chemical

1,1-Difluoroethane

Concentration

25-50%

EC/CAS

67-63-0

Name of the chemical

Propan-2-ol

Concentration

10-<20%

EC/CAS

110-54-3

Name of the chemical

n-Hexan (790/2009)

Concentration

0.1-≤1%

General Information

Version

3.1

Revision date

2020-04-06

Product name

Mold Release Spray, PTFE Based

1.2.1 Relevant identified uses

Releasing agent

Emergency telephone

+1 (310) 635-2466, +1 (202) 483-7616

Icons in SDS

GHS02 GHS04 GHS07 GHS08 GHS09 M004 M009 T013 T016

Company Information

company name

Allied High Tech Products Inc

e-mail address of the competent person responsible for the Safety Data Sheet

info@alliedhightech.com

GHS Information

Signal word

Danger

Hazard Codes

Hazard statements (CLP)

H222, H229, H280, H304, H315, H319, H336, H361, H411

Hazard statements

Code

Statements

H222

Extremely flammable aerosol

Section 2

SECTION 2: Hazards identification

2.1 Classification of the substance or mixture

GHS02 Flame Flam. Aerosol 1 H222 Extremely flammable aerosol. GHS04 Gas cylinder Press. Gas H280 Contains gas under pressure; may explode if heated. GHS08 Health hazard Repr. 2 H361 Suspected of damaging fertility or the unborn child. Asp. Tox. 1 H304 May be fatal if swallowed and enters airways. GHS09 Environment Aquatic Chronic 2 H411 Toxic to aquatic life with long lasting effects. GHS07 (Contd. of page 1) Skin Irrit. 2 H315 Causes skin irritation. Eye Irrit. 2A H319 Causes serious eye irritation. STOT SE 3 H336 May cause drowsiness or dizziness.

2.2 Label elements

The product is classified and labeled according to the Globally Harmonized System (GHS)

Hazard pictograms

GHS02 GHS04 GHS07 GHS08 GHS09

Signal word

Danger

Hazardous Ingredients

2-methylpentane 3-methylpentane isopropyl alcohol 2,2-dimethylbutane

Hazard statements

Extremely flammable aerosol. Contains gas under pressure; may explode if heated. Causes skin irritation. Causes serious eye irritation. Suspected of damaging fertility or the unborn child. May cause drowsiness or dizziness. May be fatal if swallowed and enters airways. Toxic to aquatic life with long lasting effects.

Precautionary statements

Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Keep away from heat/sparks/open flames/hot surfaces. - No smoking. Do not spray on an open flame or other ignition source. Pressurized container: Do not pierce or burn, even after use. Avoid breathing dust/fume/gas/mist/vapors/spray Wash thoroughly after handling. Use only outdoors or in a well-ventilated area. Avoid release to the environment. Wear protective gloves/protective clothing/eye protection/face protection. If swallowed: Immediately call a poison center/doctor. Specific treatment (see on this label). Do NOT induce vomiting. If on skin: Wash with plenty of water. IF INHALED: Remove person to fresh air and keep comfortable for breathing. If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. IF exposed or concerned: Get medical advice/attention. Call a poison center/doctor if you feel unwell. Take off contaminated clothing and wash it before reuse. If skin irritation occurs: Get medical advice/attention. If eye irritation persists: Get medical advice/attention. Collect spillage. Store in a well-ventilated place. Keep container tightly closed. Store locked up. Protect from sunlight. Store in a well-ventilated place. Protect from sunlight. Do not expose to temperatures exceeding 50°C/122°F. (Contd. of page 2) Dispose of contents/container in accordance with local/regional/national/international regulations.

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.