Note: Ingredients listed on restricted chemical lists
EC/CAS
7440-22-4
Name of the chemical
Silver
Concentration
N/A
EC/CAS
7440-50-8
Name of the chemical
Copper
Concentration
N/A
EC/CAS
231-131-3
Name of the chemical
Silver (nano) [1 nm < particle diameter ≤ 100 nm] Silver (massive) [particle diameter ≥ 1 mm]
Concentration
N/A
EC/CAS
231-159-6
Name of the chemical
Copper (nano) [INCI] (11), Colloidal Copper (nano) [INCI] (11)
Concentration
N/A
General Information
Revision date
2013-02-06
Product name
Autosol No Clean Cored Solder Wire (RoHS Compliant) Tin Tin/Silver, Tin/Silver/Copper Alloys
Product Synonyms
Tin Tin/Silver, Tin/Silver/Copper Alloys
Icons in SDS
Company Information
company name
Allendale Electronics Ltd
e-mail address of the competent person responsible for the Safety Data Sheet
sales@pcb-soldering.co.uk
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H317, H334
Hazard statements
Code
Statements
H317
May cause an allergic skin reaction
H334
May cause allergy or asthma symptoms or breathing difficulties if inhaled
Section 2
SECTION 2: Hazards identification
Classification (EC 1272/2008) The hazards are associated with the use of the solder wire.
2.1 Classification of the substance or mixture
EU Directive
67/548/EEC
1999/45/EC Main Hazards Rosin – May cause sensitization by skin contact. When rosin is heated in normal use, rosin fumes are irritating and may cause respiratory sensitisation by inhalation. Exposure to rosin based solder wires may cause sensitive individuals to develop eczema and/or asthma. Sensitised persons may subsequently show asthmatic symptoms when exposed to atmospheric concentration below the occupational exposure limits. Persons with a history of asthma, allergies or any respiratory problems should not be employed in any process in which the product is used. May cause an allergic skin reaction with repeated exposure. Inhalation The fumes produced by heating rosin when the product is in normal use may cause sensitisation by inhalation, Ingestion May be harmful if swallowed. Skin Contact Molten metal may cause severe damage to the skin. Sensitization by skin contact. Rosin based solder flux and its fume can cause dermatitis. Environmental No information available
2.2 Label elements
EU Directive 67/548/EEC 1999/45/EC EC 1272/2008 (CLP/GHS)
Hazard statements
Contains colophony R42- May cause sensitization by inhalation (colophony fume). H334: May cause allergy or asthma symptoms of breathing difficulties if inhaled. P261: Avoid breathing fumes.
Precautionary statements
R43 – May cause sensitization by skin contact (colophony fume) S24 – Avoid Contact with skin S37 – Wear suitable gloves P280: Wear protective gloves P285: In case of inadequate ventilation wear respiratory protection. P302+P352:IF ON SKIN, Wash with plenty of soap and water.
CLP CLASSIFICATION
Main Hazards Rosin –skin sensitization (Category 1) Rosin -Respiratory sensitization (Category 1) Autosol No Clean Cored Solder Wire Lead Free (RoHS Compliant) Tin, Tin/Silver, Tin/Silver/Copper Alloys 1 of 6
Hazard pictograms
GHS07 GHS08
Signal word
Danger H317: May cause an allergic skin reaction
Response
P304+P341: IF INHALED, If breathing is difficult, remove victim to fresh air and keep at rest in a position comfortable for breathing. P333+P313: If skin irritation or rash occurs, get medical advice/attention.