Hot Rolled Plate, Slabs, Hot & Cold Rolled Sheet

SECTION 2: Hazards identification

(a) Classification of the substance or mixture Hot Rolled Plate, Slabs, Hot & Cold Rolled Sheet is considered a “manufactured article” under the Hazardous Products Act and is not hazardous in its manufactured form and normal conditions of use. However, individual processes (such as welding, sawing, brazing, grinding, abrasive blasting, and machining) may result in the formation of fumes, dust, and/or particulate that may present hazards. Hot Rolled Plate, Slabs, Hot & Cold

Signal word

Hazard Statement(s) Suspected of causing cancer Carcinogenicity -2 Suspected of damaging fertility or the Toxic to Reproduction -2 unborn child Single Target Organ Toxicity (STOT) Repeat Exposure -1 Causes damage to lungs through prolonged or repeated inhalation exposure Acute Toxicity – Oral 4 Danger Skin Sensitization – 1 Harmful if swallowed STOT Single Exposure -3 May cause an allergic skin reaction May cause respiratory irritation N/A Eye Irritation – 2B Causes eye irritation Hazard Identification (continued)

Response

Storage/Disposal Do not breathe dusts / fume / gas / mist / vapor / spray. If inhaled: Remove person to fresh air and Dispose of contents in accordance keep comfortable for breathing. with federal, state and local Wear protective gloves / protective clothing / eye If exposed, concerned or feel unwell: Get regulations. protection / face protection. medical advice/attention. Contaminated work clothing must not be allowed out of the If in eyes: Rinse cautiously with water for workplace. several minutes. Remove contact lenses, if present and easy to do. Continue Use only outdoors or in well ventilated areas. Rinsing. If eye irritation persists: Get medical advice/attention. Wash thoroughly after handling. If on skin: Wash with plenty of water. If Obtain special instructions before use. irritation or rash occurs: Get medical advice/attention. Take off and wash Do not handle until all safety precautions have been read contaminated clothing before reuse. and understood. If swallowed: Call a poison center or Do not eat, drink or smoke when using this product. doctor/physician if you feel unwell. Rinse mouth

2.3 Other hazards

None Known 2 (d) Unknown Acute Toxicity Statement (mixture): None Known

2.1 Classification of the substance or mixture

Hot Rolled Plate, Slabs, Hot & Cold Rolled Sheet is considered a “manufactured article” under the Hazardous Products Act and is not hazardous in its manufactured form and normal conditions of use. However, individual processes (such as welding, sawing, brazing, grinding, abrasive blasting, and machining) may result in the formation of fumes, dust, and/or particulate that may present hazards. Hot Rolled Plate, Slabs, Hot & Cold Rolled Sheet is not classified as hazardous in its solid form according to 29 CFR 1910, 1915 or 1926. However, certain processes such as cutting, milling, grinding, welding, melting or similar processes may result in the emission of fumes and airborne particulate that may be hazardous. Therefore, the categories of Health Hazards as defined in “GLOBALLY HARMONIZED SYSTEM OF CLASSIFICATION AND LABELLING OF CHEMICALS (GHS), Third revised edition ST/SG/AC.10/30/Rev. 3” United Nations, New York and Geneva, 2009 have been evaluated. Refer to Section 3, 8 and 11 for additional information.