SIMALFA 321

SECTION 2: Hazards identification

Prevention

................................................................ No prevention precautionary statements required

Response

.................................................................. No response precautionary statements required

Storage

...................................................................... No storage precautionary statements required

Disposal

.................................................................... No disposal precautionary statements required Hazard(s) not otherwise Classified (HNOC): Avoid inhalations of spray mists and/or spray vapors. Ingredient(s) of unknown acute toxicity: Not applicable

2.1 Classification of the substance or mixture

Physical hazards: ...................................................... Not classified as a physical hazard under GHS criteria Health hazards: ........................................................ Not classified as a health hazard under GHS criteria Environmental hazards: .......................................... Not classified as a physical hazard under GHS criteria GHS signal word: ..................................................... Not applicable GHS hazard statement(s): ...................................... This mixture is classified as not hazardous according to paragraph (d) of §1910.1200 GHS Hazard symbol(s): ......................................... Not applicable GHS Precautionary statement(s): Prevention: ................................................................ No prevention precautionary statements required Response: .................................................................. No response precautionary statements required Storage:...................................................................... No storage precautionary statements required Disposal: .................................................................... No disposal precautionary statements required Hazard(s) not otherwise Classified (HNOC): Avoid inhalations of spray mists and/or spray vapors. Ingredient(s) of unknown acute toxicity: Not applicable SECTION 3: Composition/information on ingredients Mixture: Acrylate / CR (polychloroprenes, Chloroprene rubber) / Zinc Oxcide Chemical Name CAS# Concentration (weight %) Zinc Oxcide 1314-13-2 < 0.5 Note: The balance of the ingredients are not classified as hazardous, or are below the classification threshold under the criteria of the Federal OSHA Hazard Communication Standard 29 CFR 1910.1200 SECTION 4: First-aid measures Description of necessary measures: Inhalation: Remove to fresh air. In case of irritation of the respiratory tract seek medical advice. Skin contact: After contact with skin, wash immediately with soap and water. In case of skin irritation, seek medical treatment. Eye contact: If product gets into the eye, keep eyelid open and rinse immediately with large quantities of water, for at least 5 minutes. Subsequently consult an ophthalmologist. Ingestion: Contact a physician/medical advice immediately. Most important symptoms/effects, acute and delayed: None currently known. Indication of immediate medical attention and special treatment needed: If any symptoms are observed, contact a physician and give them this SDS sheet. SECTION 5: Fire-fighting measures Suitable extinguishing media: Water. Foam. Dry extinguishing powder. Unsuitable extinguishing media: None known. Specific hazards: Product is not combustible. In case of fire and/or explosion do not breathe fumes. Combustion products – Irritating gases and vapors. Special protective equipment and precautions for fire-fighters: Full protective clothing and NIOSH-approved self-contained breathing apparatus should be worn. Use water to cool exposed containers. SIMALFA 321 | 2 SECTION 6: Accidental release measures Personal precautions, protective equipment and emergency procedures: Wear appropriate protective equipment, such as gloves, goggles and protective clothing, as conditions warrant (see Section 8). See Sec- tions 2 and 7 for additional information on hazards and precautionary measures. Change contaminated clothing. Environmental Precautions: Stop spill/release if it can be done safely. Do not empty into drains or the aquatic environment. Cover drains. Methods and material for containment and cleaning up: Remove mechanically, placing in appropriate containers for disposal. Absorb with liquid-binding material (e.g. sand, diatomaceous earth, acid- or universal binding agents). Clear contaminated area thoroughly. Retain contaminated washing water and dispose. Dispose of in accordance with all local, state, and federal regulations. SECTION 7: Handling and storage Precautions for safe handling: The necessary precautions for handling chemicals should be followed. If suction of the immediate vicinity is impossible or insufficient, adequate airing of the working place must be ensured. Use good personal hygiene practices and wear appropriate personal protective equipment (see section 8). Conditions for safe storage, including any incompatibles: Store only in original container. Keep container tightly closed. The adhesive is sensitive to frost! Temperatures below 0°C will destroy the adhesive! Storage conditions: Store between 5°C to and 40°C Shelf life: 4 months in unopened container SECTION 8: Exposure controls/personal protection Control Parameters: Occupational exposure limits: Does not contain substances above concentration limits fixing an occupational exposure limit. US OSHA HAZARDOUS COMPONENTS (29 CFR 1910.1200): Permissible Exposure Limits Substance PEL-TWA (8 hour) PEL-STEL (15 min) Not Applicable US ACGIH Threshold Limit Values Substance TLV-TWA (8 hour) TLV-STEL (15 min) Not Applicable NIOSH Exposure Limits Substance TWA STEL Not Applicable SIMALFA 321 | 3 Appropriate engineering controls: General room ventilation should be adequate. See also Section 7. Individual protection measures, such as personal protective equipment: Eye/face protection: Use suitable safety glasses. Eye protection should be compliant with OSHA regulations. Skin and hand protection: Use appropriate gloves. Gloves must be inspected prior to use. Use proper glove removal technique (without touching glove's outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry hands. Respiratory protection: Avoid inhalations of spray mists and/or spray vapors. Work in well ventilated areas, where risk assessment shows air-purifying respira- tors are appropriate, use type N95 (US) or type P2 (EN 143) respirator. Use respirators and components tested and approved under