Note: Ingredients listed on restricted chemical lists
EC/CAS
7440-47-3
Name of the chemical
Chromium; chromic acid and its salts
Concentration
10-20
EC/CAS
7440-02-0
Name of the chemical
Nickel
Concentration
5-15
EC/CAS
9002-88-4
Name of the chemical
polyethylene wax
Concentration
<5 10-30 0-20
EC/CAS
7789-06-2
Name of the chemical
Strontium chromate
Concentration
<0.05
General Information
Version
04
Revision date
2015-06-04
Product name
REYNOBOND NATURAL STAINLESS STEEL COMPOSITE MATERIALS
1.2.1 Relevant identified uses
Architectural/building materials
Manufacturer Name
Alcoa Inc
Emergency telephone
+1-703-527-3887, +1-800-424-9300, +1-412-553-4001
Icons in SDS
Company Information
company name
Alcoa Inc
e-mail address of the competent person responsible for the Safety Data Sheet
accmsds@alcoa.com
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H317, H351, H372
Hazard statements
Code
Statements
H317
May cause an allergic skin reaction
Section 2
SECTION 2: Hazards identification
(29 CFR 1910.1200) Classification
Potential health effects
The following statements summarize the health effects generally expected in cases of overexposures. User specific situations should be assessed by a qualified individual. Additional health information can be found in Section 11. The following health effects are not likely to occur unless sawing or cutting generates dust or unless material is heated to melting.
Physical hazards
Not classified
Health hazards
Sensitization, skin Category 1 Carcinogenicity Category 2 Specific target organ toxicity, repeated Category 1 exposure
Environmental hazards
Not classified Authority defined hazards Not classified
Signal word
Danger
Hazard statements
May cause an allergic skin reaction. Suspected of causing cancer. Causes damage to organs through prolonged or repeated exposure by inhalation.
Prevention
Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Do not breathe dust/fume/gas/mist/vapors/spray. Wear protective gloves/protective clothing/eye protection/face protection. Do not eat, drink or smoke when using this product. Wash thoroughly after handling. Contaminated work clothing must not be allowed out of the workplace.
Response
IF ON SKIN Wash with plenty of water. If skin irritation or rash occurs Get medical advice/attention. Wash contaminated clothing before reuse. If exposed or concerned: Get medical advice/attention.
Storage
Store in accordance with local/regional/national/international regulations.
Disposal
Reuse or recycle material whenever possible. Hazard(s) not otherwise None known. classified (HNOC)
Additional information
Contains nickel. May produce an allergic reaction. Dust from processing: Can cause irritation of the eyes, skin and upper respiratory tract. Non-combustible. Contact with molten polymer can cause thermal burns.
2.1 Classification of the substance or mixture
This product is considered hazardous under 29 CFR 1910.1200 (Hazard Communication). Potential health effects The following statements summarize the health effects generally expected in cases of overexposures. User specific situations should be assessed by a qualified individual. Additional health information can be found in Section 11. The following health effects are not likely to occur unless sawing or cutting generates dust or unless material is heated to melting. Physical hazards Not classified. Health hazards Sensitization, skin Category 1 Carcinogenicity Category 2 Specific target organ toxicity, repeated Category 1 exposure Environmental hazards Not classified. Authority defined hazards Not classified.
