Note: Ingredients listed on restricted chemical lists
EC/CAS
7440-50-8
Name of the chemical
Copper
Concentration
<5.0
EC/CAS
7440-47-3
Name of the chemical
Chromium; chromic acid and its salts
Concentration
<0.30
EC/CAS
7440-02-0
Name of the chemical
Nickel
Concentration
<0.06
EC/CAS
7439-92-1
Name of the chemical
Blei, massiv: [Partikeldurchmesser ≥ 1 mm]
Concentration
≤0.03
EC/CAS
7440-41-7
Name of the chemical
Beryllium
Concentration
<0.002
General Information
Version
11
Revision date
2015-05-30
Product name
ALUMINUM ALLOYS WITH LOW BERYLLIUM
Product Synonyms
C475F, C555, C74T, C75T, C76T, C89T
1.2.1 Relevant identified uses
Wrought aluminum products
Manufacturer Name
Alcoa Inc
Emergency telephone
+1-703-527-3887, +1-800-424-9300, +1-412-553-4001
Icons in SDS
Company Information
company name
Alcoa Inc
e-mail address of the competent person responsible for the Safety Data Sheet
accmsds@alcoa.com
GHS Information
Signal word
Warning
Section 2
SECTION 2: Hazards identification
Potential health effects
The following statements summarize the health effects generally expected in cases of overexposures. User specific situations should be assessed by a qualified individual. Additional health information can be found in Section 11. The health effects listed below are not likely to occur unless processing of this product generates dusts or fumes.
Physical hazards
Not classified
Health hazards
Not classified
Environmental hazards
Not classified Authority defined hazards Combustible dust
Hazard pictograms
None.
Signal word
Warning
Hazard statements
May form combustible dust concentrations in air.
Prevention
Not applicable.
Response
Not applicable.
Storage
Store in a dry place.
Disposal
Dispose of contents/container in accordance with local/regional/national/international regulations. Hazard(s) not otherwise None known. classified (HNOC)
Additional information
None. Specific hazards Dust and fume from processing: Contains beryllium. May produce an allergic reaction. Non-combustible as supplied. Small chips, fine turnings, and dust from processing may be readily ignitable. Explosion/fire hazards may be present when (See Sections 5, 7 and 10 for additional information): • Dust or fines are dispersed in air. • Chips, dust or fines are in contact with water. • Dust and fines are in contact with certain metal oxides (e.g., rust, copper oxide). • Molten metal in contact with water/moisture or certain metal oxides (e.g., rust, copper oxide). Dust and fume from processing: Can cause irritation of the eyes, skin and upper respiratory tract.
2.1 Classification of the substance or mixture
Not classified. Environmental hazards Not classified. Authority defined hazards Combustible dust
